Just a small update to v1.6.2 today. Recommended if you want to fly with an accurate weight for that furry companion you sometimes take for a ride on the front seat, or if you plan to get the new livery pack (which we've created following many requests from Xboxers) from the Marketplace.
To install version 1.6.2, please click the "Comanche Check for Updates" shortcut in the "A2A Simulations" folder in the Windows start menu. If you prefer, you can also redownload the installer from your account on our store, or from wherever you purchased the Comanche.
Updated Thurs August 8th, 2024
Version 1.6.2 Changes
- Fixed to/from flags in GPS OBS mode.
- Fixed small area of protruding mesh when stabilator tips fitted.
- Updated tail number font logic for compatibility with livery pack.
- Reduced minimum selectable passenger weight to 10 lbs/5 kg to allow for dogs or cats!
Updated Sat June 1st, 2024
We're excited to release the v1.6.1 update for the Accu-Sim Comanche 250 which adds the option to fit the excellent 'falcon71' KLN 90B GPS. When this option is selected, an AK-950 remote annunciator is also installed below the VSI. You'll need to install the KLN package (it's free) before it can be selected using the tablet. You can find out more and download it here: https://github.com/falcon71/kln90b. If you already have the KLN installed, please make sure you update to at least v1.3 of the package.
The KLN 90B is nicely suited to the Comanche and has some nifty features for sim use like direct keyboard entry in cursor mode. Please note that it won't work if you have the additional "pms50-gtn750wtt-aircraft-a2a-pa24" folder in your Community directory for the PMS GTN 750. If you do have this folder present, please delete it from your community folder as native WTT mode for the PMS GTN 750 is now included with v1.6.1.
Version 1.6.1 Changes
- Added option to use falcon71 KLN 90B GPS (this package can be downloaded from https://github.com/falcon71/kln90b).
- Added native internal WTT mode for PMS GTN 750.
- Fixed issue preventing flight plans from loading with default GNS 430W/530W.
- Fixed fuel adjustment issue after restart of JPI EDM 830.
- Fixed last digit of comm radio frequencies with 8.33 kHz spacing not being saved between sessions.
- Tuned ground physics for more accurate crosswind handling.
- Better detection of multi-position switches by input configurator.
Version 1.5.0 Changes
- Fixed airplane creeping post SU15 when engine is run up with brakes or chocks applied
- Fixed a bug preventing airplane from moving away from parking spot in some locations when outside air temperature is well below freezing
- Improved synchronization between navigation light switching and relay click sound when using panel light rheostat
- Fixed air pressure display error in altimeter Kollsman window when set to use imperial units (inHg)
- Improved battery performance slightly at very cold temperatures allowing for better chance of engine start
- Extended the lifespan of the oil pump and oil lines
- Slightly reduced the effectiveness of the fresh air vents
- Improved the display logic for centre of gravity in tablet
- Added additional telemetry variables for force-feedback hardware
- Omitted WT GNS initialization sequence when aircraft is loaded with avionics power already on
- Added update history for Marketplace
Version 1.4.8 Changes (Xbox/Marketplace only)
- Fixed system crash when the tow bar is disconnected on Xbox installations
- Fixed sensitivity of Xbox controller buttons for throttle, prop and mixture control
Version 1.4.7 Changes
- Added support for Xbox platform
- Fixed overstress crash which would occur if view was switched to outside camera following an apron start with cockpit persistence switched off
- Improved engine physics so very high temperature can cause more rapid cylinder wall deterioration
- Improved integrity of cabin against air leaks to allow more efficient heating
- Fixed cabin vent bug which caused vents to not exchange air properly
- Fixed issue which caused vents to pick up too much ambient wind on the ground
- Improved magneto physics so badly worn mags will generally perform worse
- Added new localizations for aircraft description
Version 1.4.3 Changes
- Improved support for loading saved flights
- Fixed repetitive 'tick' in engine sound at around 1,200 RPM
- Added input configurator support for multiple joystick devices with the same name
- Fixed typos in airframe and engine maintenance section descriptions
- Updated hangar aircraft description to match Marketplace release
Version 1.4.0 Changes
- Updated sound system to use Wwise interface
- Removed HelperA2AserviceMSFS executable and its entry in exe.xml
- Removed master volume slider from tablet as this is now controlled by the MSFS master volume slider
- Restored proper engine preheater functionality
- Slightly improved performance of battery at very low temperature
- Improved handling of custom joystick shortcuts with the new functions added to MSFS SDK in SU13. (The change will take effect after saving config using the updated Input Configurator.)
- Fixed GTN 750Xi not being shown as selected in tablet after restart
- Enlarged environment occlusion to prevent long blades of grass from poking through cockpit floor
- Fixed point and drag interaction when using gamepad
- Fixed symmetry of navigation lights
- Fixed wing loading displayed on tablet when metric units are selected
- Fixed transponder ident light remaining on if lit when avionics power switched off
- Modified beacon lighting to eliminate slight leak onto cabin ceiling
- Removed pitch control out of range log warning
- Updated Hobbs and tachometer counters to show tenths of hours digit as black on white
- Corrected mistyped instance of ‘crankshaft’ in maintenance details of tablet
Version 1.3.0 Changes
- Fixed parking brake not engaging when brakes are somewhat worn
- Fixed accelerated corrosion damage when aircraft is not in use
- Added persistent rudder trim behavior
- Fixed double clicks being necessary at some stations if conducting a second walkaround
- Fixed overstress crash if moving camera position to external instrument view camera via keystroke
- Fixed TDS GTN 750Xi not initializing under certain conditions
- Added function to repair landing lights using the tablet
- Fixed bug where very low FPS could cause runaway physics and animation artefacts
- Added trim acceleration option to the tablet
- Added independent options for metric temperature and air pressure to the tablet
- Linked ADF timer volume to warnings volume slider in the tablet
- Fixed tip tank gauge not powering down when battery was switched off with right tank selected
- Fixed memory leak when engine analyzer page of tablet open
- Added support for rudder axis when auto rudder is selected in MSFS assistance options
- Fixed modelling of left ashtray
- Fixed part of rudder pedals axle being visible from the outside
- Mapped fuel selectors to MSFS "left main", "left aux", "2 right main", "2 right aux" key shortcuts
Version 1.2.0 Changes
- Improved wing flex animation to work properly at all framerates and fixed bug that caused extreme wing flex movements at around 20 fps
- Improved cockpit glass transparency for better clarity, particularly with high-end VR headsets
- Added support for ambient sounds with door and windows opened and during walkaround
- Added support for mono Bluetooth headsets with low sampling rate
- Added function to EDM 830 to reset fuel used by holding both buttons on USD screen (accessed via right click and hold on either button)
- Fixed shock cooling warning not showing when it should on EDM 830
- Added additional protection against false prop strikes caused by terrain errors
- Reduced lift provided by flap gap seals
- Additional tuning of ground physics
- Added tablet brightness slider to tablet settings
- Improved handling of magneto starter shortcuts
- Added starter button response to magneto events for improved hardware panel compatibility
- Added function to remove registration placard in cockpit via mouse click
- Removed clicking sound from GPS and COMM radio volume knobs
- Fixed ADF on/off sound
- Reduced size of click spots to hide and show yokes
- Improved smoothness of cabin door animation
- Fixed generator bug where it would not come back online if all electrics were off, idle was reduced to shut it off then increased to turn it back on again
- Added ability to fix landing lights in the walkaround
- Fixed fuel quantity gauges tooltips
- Fixed small issues in external model, left windshield frame, elevator trim rivets and nose wheel steering cylinder animation
- Increased amount of yoke deflection required to disconnect autopilot
- Fixed yoke movement turning off autopilot master switch rather than disconnecting autopilot
- Added overhaul confirmation to maintenance page of tablet
- Fixed cockpit persistence and loading with cold and dark and phases
- Fixed engine temperature not being properly saved with cold start
- Fixed event flood associated with com channel spacing
- Changed centre of gravity units to inches rather than percent on tablet fuel and payload page
- Fixed issue where rudder could get damaged too easily when not in use
- Added support for MSFS auto-rudder function
- Improved compatibility with MSFS parking brake event so it no longer interferes with toe brakes operation
- Updated gauge glass rendering
- Fixed navigation lights key shortcuts
- Added prop lever choice to persistent per-livery state
- Tuned yoke animation
- Fixed door opening in multiplayer
- Fixed cabin door latch animation
- Tuned balance of beacon motor sound effect
- Fixed screws position on the right main fuel tank
- Amended references to recommended maximum landing gear operating speed on page 35 of the pilot's manual
Version 1.1.0 Changes
- Added fix for torque spike that was causing very occasional aircraft ‘flips’
- Improved compatibility with third-party utilities including FSEconomy and OnAir
- Added message on installation to warn user if their EXE.xml file is corrupted
- Improved handling of unwanted trim inputs sent by default MSFS autopilot
- Improved telemetry support for force-feedback devices
- Added barometric pressure to altimeter tooltip in legacy mode
- Improved hardware switch compatibility for autopilot
- Improved hardware switch compatibility for battery switch and starter button
- Improved animation smoothness of controls surfaces and yoke
- Added animation lag to main door
- Added functional external handles to the cabin door from nearby walkaround positions
- Added persistent altimeter pressure adjustment
- Fixed reversed propeller pitch LO and HI shortcuts
- Revised tablet controls to indicate if at least one chock or tie down is placed
- Fixed XML conflict with aircraft registration fonts
- Fixed tablet not being clickable if B78XH (B787-10 Heavy) add-on is installed
- Fixed reversed yoke animation when moving ailerons during walkaround
- Disabled walkaround once aircraft is in motion
- Added “PilotVR” entry to cameras.cfg
- Improved support for MSFS ATC calls
- Fixed animation of pitot cover ‘remove before flight’ tag if left on during flight
- Added clickspot to restore tablet to wall pocket if tablet left outside during walkaround
- Fixed emergency landing gear handle
- Limited throttle input to positive values if hardware reverser axis is used
- Improved handling of wing flex animation at low fps
- Slightly increased P-factor
- Slightly reduced effect of prop wash over stabilator
- Improved turn coordinator inclinometer ball physics
- Fixed bug in mixture lever calculations
- Slightly reduced rate at which fuel dissipates from engine cylinders
- Tuned EGT and CHT cooling rates
- Tuned engine heater effectiveness
- Removed EDM 830 fuel totalizer count with simulator paused
- Improved MSFS parking brake support for third-party utilities
- Restored missing engine cooldown sounds
- Restored some engine pulses at very low RPM
- Fixed any accumulated carburetor ice not being removed when replacing the carburetor
- Reduced possibility of a mid-air prop strike due to terrain errors
- Fixed beacon illumination when battery is off
- Reduced speed of brake pedal activation when using button/key input
- Fixed some small gaps in cockpit model
- Fixed bug with 5x failure rate (5x failure rate was producing failures at 1000x rate!)
- Fixed logic for maneuvering speed placard below airspeed indicator with tip tanks installed
- Prevented instrument views from automatically unstowing tablet from side pocket
- Revised Vy on tablet and in pilot’s manual to use more recent numbers
- Revised alternator failure emergency checklist on tablet and in pilot’s manual
- Added links to original Narco Avionics manuals in pilot’s manual
- Added links to pilot’s manual and input configurator in community folder
- Fixed noise cancelling switch on headphones not being stored when headphones unplugged
- Improved support for propeller rotation states in multiplayer
- Added functions for rotating autopilot roll knob via key/button to input configurator
- Fixed slightly misaligned text on manufacturer’s data plate
- Fixed typo on turn coordinator tooltip
- Fixed nosewheel steering being affected by a broken rudder
- Updated input configurator (no longer requires legacy DirectX library)
To everyone who has purchased the Comanche, we'd just like to finish by saying 'thank you'.
- A2A Simulations