[resolved] C182 in P3DV5 HF1
Re: C182 in P3DV5 HF1
Thanks Nick. The workaround with reload is OK at the moment.
Re: C182 in P3DV5 HF1
Good morning all,
I will uninstall everything from A2A, manually clean up everything I find, and reinstall, only the C182.
I will uninstall everything from A2A, manually clean up everything I find, and reinstall, only the C182.
CM ASUS ROG STRIX Z270F / CPU Intel I7 7700K 4,2 GHz / GTX 1080 STRIX 8 Go/ Mem 4 X 8Go DDR4 skill ripjaws 2400 / FS2020 / FFB2 / quadrant & rudder saiteck / Trackir 5 / A2A: I am waiting
Re: C182 in P3DV5 HF1
Unfortunately still the same problem; I installed the commanche, and there everything is fine.
CM ASUS ROG STRIX Z270F / CPU Intel I7 7700K 4,2 GHz / GTX 1080 STRIX 8 Go/ Mem 4 X 8Go DDR4 skill ripjaws 2400 / FS2020 / FFB2 / quadrant & rudder saiteck / Trackir 5 / A2A: I am waiting
- Nick - A2A
- A2A Captain
- Posts: 13805
- Joined: 06 Jun 2014, 13:06
- Location: UK
Re: C182 in P3DV5 HF1
Hello cro24 - please can you try what I mentioned in my previous post: reloading the 182.
Thanks,
Nick
Thanks,
Nick
A2A Simulations Inc.
Re: C182 in P3DV5 HF1
Further to this - I had the fulel leak issue & deleted the log files which cleared the fault. One short flight later and the fuel leak is back. Initially I could repair it, but it returned immediately. I'm not sure if there is a link but I'm also using the F1 GTN 750 and 650 in my setup.
Re: C182 in P3DV5 HF1
I thought I knew all of A2A's directories, and I skipped this one.Nick - A2A wrote: ↑24 May 2020, 03:12 Hello cro24 - please can you try what I mentioned in my previous post: reloading the 182.
Thanks,
Nick
Handle done, Maule by default, on the ground, change of plane => C182, everything is fine.
A small flight, takeoff, landing, everything is OK. I cut the engines => oil level drops to zero.
I change C182, and each time the same problem.
Sorry my dear,
Bernard,
CM ASUS ROG STRIX Z270F / CPU Intel I7 7700K 4,2 GHz / GTX 1080 STRIX 8 Go/ Mem 4 X 8Go DDR4 skill ripjaws 2400 / FS2020 / FFB2 / quadrant & rudder saiteck / Trackir 5 / A2A: I am waiting
Re: C182 in P3DV5 HF1
Oil or fuel ??ggi wrote: ↑24 May 2020, 03:46 Further to this - I had the fulel leak issue & deleted the log files which cleared the fault. One short flight later and the fuel leak is back. Initially I could repair it, but it returned immediately. I'm not sure if there is a link but I'm also using the F1 GTN 750 and 650 in my setup.
CM ASUS ROG STRIX Z270F / CPU Intel I7 7700K 4,2 GHz / GTX 1080 STRIX 8 Go/ Mem 4 X 8Go DDR4 skill ripjaws 2400 / FS2020 / FFB2 / quadrant & rudder saiteck / Trackir 5 / A2A: I am waiting
Re: C182 in P3DV5 HF1
I can confirm this behavior.
What have you done to my plane sir? )
The v4 Version worked perfekt in v5, except the rain effect.
What have you done to my plane sir? )
The v4 Version worked perfekt in v5, except the rain effect.
- Nick - A2A
- A2A Captain
- Posts: 13805
- Joined: 06 Jun 2014, 13:06
- Location: UK
Re: C182 in P3DV5 HF1
Thanks guys - we've been able to reproduce the issue and we're investigating it now.
Nick
Nick
A2A Simulations Inc.
Re: C182 in P3DV5 HF1
You are the bestNick - A2A wrote: ↑24 May 2020, 06:12 Thanks guys - we've been able to reproduce the issue and we're investigating it now.
Nick
CM ASUS ROG STRIX Z270F / CPU Intel I7 7700K 4,2 GHz / GTX 1080 STRIX 8 Go/ Mem 4 X 8Go DDR4 skill ripjaws 2400 / FS2020 / FFB2 / quadrant & rudder saiteck / Trackir 5 / A2A: I am waiting
Re: C182 in P3DV5 HF1
Hi all,
Just to let you know, I had this issue with the fuel leak too, moving from V4 to V5.
I have deleted the A2A documents folder and will report back if issue persists.
Just to let you know, I had this issue with the fuel leak too, moving from V4 to V5.
I have deleted the A2A documents folder and will report back if issue persists.
- Nick - A2A
- A2A Captain
- Posts: 13805
- Joined: 06 Jun 2014, 13:06
- Location: UK
Re: C182 in P3DV5 HF1
I'm afraid it will until we can eliminate this bug and issue an update. We've made some good progress, so hope to have more info soon.
In the meantime, it may be best to stick with auto-start on the 182 and if you need to shut down and then restart (e.g. if refuelling) just reload the aircraft as described above.
Thanks and apologies for the inconvenience,
Nick
A2A Simulations Inc.
- Nick - A2A
- A2A Captain
- Posts: 13805
- Joined: 06 Jun 2014, 13:06
- Location: UK
Re: C182 in P3DV5 HF1
Hello guys,
We now have an update to address this issue.
For now, please can you download it manually from this link and let us know if you have any issues with engine start or shutdown in the 182 with this fix is in place. We'll make the update available via the usual method a bit later.
Many thanks,
Nick
We now have an update to address this issue.
For now, please can you download it manually from this link and let us know if you have any issues with engine start or shutdown in the 182 with this fix is in place. We'll make the update available via the usual method a bit later.
Many thanks,
Nick
A2A Simulations Inc.
Re: C182 in P3DV5 HF1
Cheers Nick,Nick - A2A wrote: ↑25 May 2020, 10:31 Hello guys,
We now have an update to address this issue.
For now, please can you download it manually from this link and let us know if you have any issues with engine start or shutdown in the 182 with this fix is in place. We'll make the update available via the usual method a bit later.
Many thanks,
Nick
Will test now and report back for you .
Re: C182 in P3DV5 HF1
CM ASUS ROG STRIX Z270F / CPU Intel I7 7700K 4,2 GHz / GTX 1080 STRIX 8 Go/ Mem 4 X 8Go DDR4 skill ripjaws 2400 / FS2020 / FFB2 / quadrant & rudder saiteck / Trackir 5 / A2A: I am waiting
Who is online
Users browsing this forum: No registered users and 21 guests