A2A Development Update Dec 2017

[Aymi]

LEWIS COME BACK we're not done yet

[Marco909]

Some aircraft just look right with tip tanks and two twins come to mind; the Fouga Magister and Douglas A-26K COIN. I could go on, and I think we all probably will for some time....

[Marvin-E34]

@Marvin-E34 Une belle prise de vue sur ce superbe Constellation...

Personnellement j'attends désespérément une mise à jour de l'Accusim qui solutionnerait les problèmes de mémorisation des fréquences dans les canaux de la Radio Com sur le C172/C182.
Comme je ne possède pas encore les autres avions GA ( cela viendra avec le temps ) je ne me préoccupe que de ceux que je possède actuellement.
C'est tout ce que je souhaite pour le moment comme nouveauté. XD

Bienvenue à toi.

Amicalement
Gérard

Merci !

Oui je pense qu'ils ont aussi à coeur de fournir un produit de qualité !
Malheureusement ce sont les aléas des changements de versions.
L'avantage avec FSX c'est que rien ne changeait du coup ils pouvaient aller super loin dans les développements.
Avec la version 64 bits de P3D (et les éventuelles versions à venir) ça va être un peu la course à rattraper le retard sur chaque nouvelle version.
Je constate la même chose sur X-plane 11 où pas mal d'avions à peine sortis sur X-plane 10 ou sur les premières version d'X-plane 11 doivent être revus entièrement.

Au moins les choses changent ! Mais en ce qui me concerne je vais attendre patiemment avant de passer sur P3D !

[b3a]

LEWIS COME BACK we're not done yet

That Lewis who does he think he is, ignoring us and all lol hopefully running away to get this project out to us.

[Scott - A2A]

OK Lewis reminded me that we promised something by the end of March.... We're caught between a rock and a hard place - at some point down the road I will be able to explain in detail what we're doing and why we had to remain so quiet.

But in the meantime, we will reveal this weekend our current Accu-Sim airplane in development. It's not going to be a produced announcement, just a straight talking post here for the community to see, then we can discuss it further as we continue to work on the airplane.

Scott.

[Marvin-E34]

OK Lewis reminded me that we promised something by the end of March.... We're caught between a rock and a hard place - at some point down the road I will be able to explain in detail what we're doing and why we had to remain so quiet.

But in the meantime, we will reveal this weekend our current Accu-Sim airplane in development. It's not going to be a produced announcement, just a straight talking post here for the community to see, then we can discuss it further as we continue to work on the airplane.

Scott.

[youtube]http://www.youtube.com/watch?v=bDa3J2KJqxM[/youtube]

[n421nj]

Thank you for the update.

[Piper_EEWL]

Thanks for the update on the situation Scott. Now we can at least stop hitting F5 till the weekend...

Happy flying

[Medtner]

OK Lewis reminded me that we promised something by the end of March.... We're caught between a rock and a hard place - at some point down the road I will be able to explain in detail what we're doing and why we had to remain so quiet.

But in the meantime, we will reveal this weekend our current Accu-Sim airplane in development. It's not going to be a produced announcement, just a straight talking post here for the community to see, then we can discuss it further as we continue to work on the airplane.

Scott.

Don't worry, we'll all be here waiting for the eventual release. We are just like kids waiting to open the christmas presents, only ever so slightly more civilized.

Best of luck with the continued development!

[b3a]

OK Lewis reminded me that we promised something by the end of March.... We're caught between a rock and a hard place - at some point down the road I will be able to explain in detail what we're doing and why we had to remain so quiet.

But in the meantime, we will reveal this weekend our current Accu-Sim airplane in development. It's not going to be a produced announcement, just a straight talking post here for the community to see, then we can discuss it further as we continue to work on the airplane.

Scott.

Don't worry, we'll all be here waiting for the eventual release. We are just like kids waiting to open the christmas presents, only ever so slightly more civilized.

Best of luck with the continued development!

Speak for yourself but most us arnt civilized

Just kidding

[Medtner]

OK Lewis reminded me that we promised something by the end of March.... We're caught between a rock and a hard place - at some point down the road I will be able to explain in detail what we're doing and why we had to remain so quiet.

But in the meantime, we will reveal this weekend our current Accu-Sim airplane in development. It's not going to be a produced announcement, just a straight talking post here for the community to see, then we can discuss it further as we continue to work on the airplane.

Scott.

Don't worry, we'll all be here waiting for the eventual release. We are just like kids waiting to open the christmas presents, only ever so slightly more civilized.

Best of luck with the continued development!

Speak for yourself but most us arnt civilized

Just kidding

I know, but with my statement I hoped to drag all of us uncivilized creatures up from the filth, and into the sunny Accusim-skies.

[Paughco]

Scott: Thank you for the word! I'll fire up my T-6 and do some loops and rolls in your honor!

Seeya
ATB

[ClipperLuna]

!
Thank you Scott! Even if it's just an announcement of what it's going to be, it's still something exciting to look forward to.

[Roadburner426]

Woohoo! Now the long wait till the weekend. Thankfully will be rebuilding a main rotor head then installing a main gearbox most of the week so that should pre-occupy my mind till then.

[gege21]

Merci !

Oui je pense qu'ils ont aussi à coeur de fournir un produit de qualité !
Malheureusement ce sont les aléas des changements de versions.
L'avantage avec FSX c'est que rien ne changeait du coup ils pouvaient aller super loin dans les développements.
Avec la version 64 bits de P3D (et les éventuelles versions à venir) ça va être un peu la course à rattraper le retard sur chaque nouvelle version.
Je constate la même chose sur X-plane 11 où pas mal d'avions à peine sortis sur X-plane 10 ou sur les premières version d'X-plane 11 doivent être revus entièrement.

Au moins les choses changent ! Mais en ce qui me concerne je vais attendre patiemment avant de passer sur P3D !

Pour ma part le passage à P3D s'est fait avec la sortie de la version 4 en 64 Bit et dans la douleur car j'ai dû racheter mes avions A2A, déjà possédés pour FSX, en version P3D. Il me manque, par rapport à FSX le Piper Cub mais celui-ci n'est pas disponible pour P3D.
Dans l'attente de l'annonce de Mr SCOTT, et les futures nouveautés de Accusim, je vais laisser un peu de côté la simulation de vol. Je retourne à mes trains XD. C'est toujours un moyen de transport non ?

Amicalement
Gérard