Hello:
I applied the Oct 12th download (fix) but the turning radius is still much larger than it was before the 4.1 update. The nose wheel barely turns. Anything else
I can do to improve the situation?
Thanks
182 Turning radius
Re: 182 Turning radius
Are you running P3D 4.1? The update procedure to 4.1 does require the 4.0 to be completely installed petite to upgrading to 4.1 if you went the route of only upgrading the client.
If the airplane does respond to rudder input on the ground, then this doesn't sound like the typical 4.1 nosewheel steering issue. It is not uncommon to use differential being in the 172 to make tighter turns. This is the way the real aircraft functions.
If the airplane does respond to rudder input on the ground, then this doesn't sound like the typical 4.1 nosewheel steering issue. It is not uncommon to use differential being in the 172 to make tighter turns. This is the way the real aircraft functions.
Flight Simmer since 1983. PP ASEL IR Tailwheel
N28021 1979 Super Viking 17-30A
N28021 1979 Super Viking 17-30A
Re: 182 Turning radius
Thanks for getting back to me. Yes I had V4 installed prior to installing 4.1. Prior to 4.1, I could see the nose wheel turn left and right from a front head on view. Now, it barely moves.
I cannot complete a 180 degree turn starting at the edge of a 150 foot wide runway without going off into the grass on the other side.
I cannot complete a 180 degree turn starting at the edge of a 150 foot wide runway without going off into the grass on the other side.
Re: 182 Turning radius
As I asked earlier, how exactly did you upgrade to version 4.1? The procedure must be performed correctly as per Lockheed Martin's instructions, or you may have a corrupt installation.
If you simply installed the 4.1 client over a 4.0 installation that may be the cause of your issues.
The Oct 12th patch only works with P3D v 4.1.
If you simply installed the 4.1 client over a 4.0 installation that may be the cause of your issues.
The Oct 12th patch only works with P3D v 4.1.
Flight Simmer since 1983. PP ASEL IR Tailwheel
N28021 1979 Super Viking 17-30A
N28021 1979 Super Viking 17-30A
Re: 182 Turning radius
Hi again:
For clarification, I did not install 4.1 over 4.0. I downloaded a complete version 4 that included the 4.1 update directly from Prepared. This was done in late October 2017
and I worked with my computer source Jetline Systems to verify everything was done correctly. In summation, I am running a correct non corrupted version of P3DV4.1.
For clarification, I did not install 4.1 over 4.0. I downloaded a complete version 4 that included the 4.1 update directly from Prepared. This was done in late October 2017
and I worked with my computer source Jetline Systems to verify everything was done correctly. In summation, I am running a correct non corrupted version of P3DV4.1.
Re: 182 Turning radius
So you have 4.1 and the Oct A2A patch applied from the sticky topic up above... hmmmmm
All default aircraft work fine?
How are your controls mapped? What type of control are you using and to what axis are the rudder controls mapped to?
Someone else reported a very similar issue and it turned out that the controls were not mapped correctly.
All default aircraft work fine?
How are your controls mapped? What type of control are you using and to what axis are the rudder controls mapped to?
Someone else reported a very similar issue and it turned out that the controls were not mapped correctly.
Flight Simmer since 1983. PP ASEL IR Tailwheel
N28021 1979 Super Viking 17-30A
N28021 1979 Super Viking 17-30A
Re: 182 Turning radius
Both default and all other add on aircraft work perfectly. I don’t use fsuipc so all controls are mapped through P3d. Rudder works fine it’s just the nose wheel. All other aircraft I can see the wheel turn fully left to right and conversely. The 182 and 180 barely move.
Re: 182 Turning radius
What axis is the rudder control mapped to?
Have you tried making through the A2A control configurator for each aircraft? I'm not 100% sure odd the configuratot provides for a rudder axis mapping, but I believe it does.
Have you tried making through the A2A control configurator for each aircraft? I'm not 100% sure odd the configuratot provides for a rudder axis mapping, but I believe it does.
Flight Simmer since 1983. PP ASEL IR Tailwheel
N28021 1979 Super Viking 17-30A
N28021 1979 Super Viking 17-30A
- Lewis - A2A
- A2A Lieutenant Colonel
- Posts: 33318
- Joined: 06 Nov 2004, 23:22
- Location: Norfolk UK
- Contact:
Re: 182 Turning radius
If you went the full instal route over the update route, prior to running the full 4.1 installer did you fully uninstall 4.0 and all associated software?
Things from your description are pointing toward a corrupt P3D installation at present.
thanks,
Lewis
Things from your description are pointing toward a corrupt P3D installation at present.
thanks,
Lewis
A2A Facebook for news live to your social media newsfeed
A2A Youtube because a video can say a thousand screenshots,..
A2A Simulations Twitter for news live to your social media newsfeed
A2A Simulations Community Discord for voice/text chat
A2A Youtube because a video can say a thousand screenshots,..
A2A Simulations Twitter for news live to your social media newsfeed
A2A Simulations Community Discord for voice/text chat
Re: 182 Turning radius
Lewis:
I had P3dv3 on my computer prior to installing a new version 4 installation which included the 4.1 update. All new version 4 downloads in late October included the 4.1 update.
Dennis
I had P3dv3 on my computer prior to installing a new version 4 installation which included the 4.1 update. All new version 4 downloads in late October included the 4.1 update.
Dennis
Re: 182 Turning radius
Oracle427
I will look into that when back at my PC and advise. As I recall all the settings were standard but I will check it out.
Dennis
I will look into that when back at my PC and advise. As I recall all the settings were standard but I will check it out.
Dennis
Re: 182 Turning radius
Hi guys:
Well now I'm really confused. Stopped back at the house and checked my A2A aircraft and now, the 180 nose wheel works perfectly!! Checked the 182 and still barely
any nose wheel movement. So it looks like this is just related to the 182 and no other aircraft. Should I re-install? Then download the patch again?
Dennis
Well now I'm really confused. Stopped back at the house and checked my A2A aircraft and now, the 180 nose wheel works perfectly!! Checked the 182 and still barely
any nose wheel movement. So it looks like this is just related to the 182 and no other aircraft. Should I re-install? Then download the patch again?
Dennis
Re: 182 Turning radius
I also checked my 250 and as in the case of the 180 the nose wheel works/functions perfectly. Only the 182.
C an you please offer some guidance as to how to resolve this problem. The 182 is my go to aircraft but if
I can't taxi, that's a big problem!!
I look forward to hearing from you and thanks.
Dennis
C an you please offer some guidance as to how to resolve this problem. The 182 is my go to aircraft but if
I can't taxi, that's a big problem!!
I look forward to hearing from you and thanks.
Dennis
- Lewis - A2A
- A2A Lieutenant Colonel
- Posts: 33318
- Joined: 06 Nov 2004, 23:22
- Location: Norfolk UK
- Contact:
Re: 182 Turning radius
Hello,
just to check you are using the P3Dv4 182 and not a previous version?
thanks,
Lewis
just to check you are using the P3Dv4 182 and not a previous version?
thanks,
Lewis
A2A Facebook for news live to your social media newsfeed
A2A Youtube because a video can say a thousand screenshots,..
A2A Simulations Twitter for news live to your social media newsfeed
A2A Simulations Community Discord for voice/text chat
A2A Youtube because a video can say a thousand screenshots,..
A2A Simulations Twitter for news live to your social media newsfeed
A2A Simulations Community Discord for voice/text chat
Re: 182 Turning radius
Hi Lewis
Yes. I repurchased the 182 from PCAviator Oct 21 of this year and it was
definitely for version 4.
Dennis
Yes. I repurchased the 182 from PCAviator Oct 21 of this year and it was
definitely for version 4.
Dennis
Who is online
Users browsing this forum: No registered users and 14 guests