Cub Issues [resolved]

[Jigsaw]

Deryl, I think I just stumbled over the solution for your problem by accident. I was doing some FSRecorder/Helicam tests and in order to have more control over the heli while filming I reduced the realism settings to minimum. When I switched back to the Cub and forgot to reset the realism to their max settings I experienced exactly the same banking problems that you described. The problem even occurs when the General Realism setting slider is only one tiny notch below max realism.

To cut a long story short: go to the Realism menu (Aircraft -> Realism Settings) and make absolutely sure that the General Realism slider is set all the way to the right.

[Deryl]

Here is my info. Have no idea what it all means but hopefully it will be of some help.


------------------
System Information
------------------
Report Time: 2009/9/7 15:17:21
OS: Windows XP Professional Service Pack 3 (Build 2600)
BIOS: DELL - d Phoenix ROM BIOS PLUS Version 1.10 A06
Processor: ~2400MHz Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
Memory: 3 GB
Default Audio Device Name: SB X-Fi Audio [CCE0]
Audio Driver Filename: ctaud2k.sys
Audio Driver File Version: 5.12.1.1201
Audio Driver Product Version: 2.10.0.1
ALCapsViewer Version: 1.0.3.0

-----------------
OpenAL Components
-----------------
Name Path Version
OpenAL32.dll C:\WINDOWS\system32\ 6.14.357.22
ct_oal.dll C:\WINDOWS\system32\ 5.12.1.1201
wrap_oal.dll C:\WINDOWS\system32\ 2.1.8.1

--------------
OpenAL Devices
--------------
Name: SB X-Fi Audio [CCE0]
Sample Offset: Yes
Linear Distance Model: Yes
Exponent Distance Model: Yes
Capture: Yes
Enumeration: Yes
EAX 2.0: Yes
EAX 3.0: Yes
EAX 4.0: Yes
EAX 5.0: Yes
X-RAM: No
Enumerate All: Yes
EFX 1.0: Yes

Name: Generic Hardware
Sample Offset: Yes
Linear Distance Model: Yes
Exponent Distance Model: Yes
Capture: Yes
Enumeration: Yes
EAX 2.0: Yes
EAX 3.0: Yes
EAX 4.0: Yes
EAX 5.0: Yes
X-RAM: No
Enumerate All: Yes
EFX 1.0: Yes

Name: Generic Software
Sample Offset: Yes
Linear Distance Model: Yes
Exponent Distance Model: Yes
Capture: Yes
Enumeration: Yes
EAX 2.0: Yes
EAX 3.0: No
EAX 4.0: No
EAX 5.0: No
X-RAM: No
Enumerate All: Yes
EFX 1.0: Yes

[Deryl]

Deryl, I think I just stumbled over the solution for your problem by accident. I was doing some FSRecorder/Helicam tests and in order to have more control over the heli while filming I reduced the realism settings to minimum. When I switched back to the Cub and forgot to reset the realism to their max settings I experienced exactly the same banking problems that you described. The problem even occurs when the General Realism setting slider is only one tiny notch below max realism.

To cut a long story short: go to the Realism menu (Aircraft -> Realism Settings) and make absolutely sure that the General Realism slider is set all the way to the right.

YAHOO!!! That did it!!!

I thought I had all the realism settings maxed out only to discover that the "General" setting was a barely noticeable 1 notch below the max setting.

Glad to report the Cub now flies like a dream!

[Jigsaw]

That's great! Enjoy that beauty. You've earned it after all that trouble.

[Scott - A2A]

Cody,

I posted in the wrong thread. I was on the phone with Harry in this thread:
http://a2asimulations.com/forum/viewtop ... 4&start=15

He is the one who changed his motherboard and has the sound issues.

Scott.

[Tim_Capps]

Never mind. Full realism got switched back by something. Everything's fine now.

My altimeter has two readings: Ground. Air.

[some1 - A2A]

Try this:

To cut a long story short: go to the Realism menu (Aircraft -> Realism Settings) and make absolutely sure that the General Realism slider is set all the way to the right.

As Scott said above, he posted in wrong thread, bank problems are unrelated to sound card.

[Lewis - A2A]

Great to see these things being worked out

Glad your flying Deryl

[fu_manchu_72]

I have had this problem for the last few weeks and it is fixed now also, thanks gents!!