And first use of a product of yours. Sorry it has to be about a problem with an installation, I was looking forward to trying this one, alas! I have seen this product has already had numerous problems with users from other posts, and I have attempted some of the possible solutions to no avail, hence my posting. Your attention will be very much appreciated.
Before I get questioned, I wish to ask a few myself, please. But first, a description of the problem.
Bought the A2A Spitfire from JustFlight.
https://www.justflight.com/product/a2a- ... re-mk-i-ii
Installation as admin, to the LockheedMartin P3D folder. Installation, DX Setup and update of the product apparently all ran and terminated correctly. P3D run as admin. Selection of the Spitfire as vehicle causes P3D to CTD immediately.
I run Windows 10.
1. Is the product directed at a very specific update of P3D V4, or should it work on any of the P3D V4 installations?
2. Looking at the Troubleshooting FAQ, it mentions installation of Accu-sim pack (which I am assuming is different to the Accu-feel pack?)...
https://www.a2asimulations.com/forum/vi ... 78&t=23593
Is this a separate download? Information on this subject is just a bit garbled, from my perspective. I asked a friend who uses A2A products, and he says it should already be included in the product download, but I cannot find any such separate install, nor does it appear to install automatically. Help with that is important, please. If this is a separate download, where do I obtain it?
That would be all, for now. Please shoot with your questions, and my thanks in advance.
All the best!
PS: Additional information.
I like to keep my ContentError.txt log as clean as possible, and at least look into all warnings I get there. When the Spitfire causes the CTD, there is this warning in that file...
Code: Select all
[error.4]
error=Gauge file not found: accusim_xml!testbar
Thanks again.