The A2A Simulations Community

Hi all,

Did someone give a try to configure the lights for the Wilco/Feelthere EJET 170/190???

Regards and tks in advance!!!

Fábio

Here is my work

first is the 170

[LIGHTS]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing
light.0=2, -57.60, 0.50, 2.90, fx_shockwave_strobe_2 ,
light.1=2, 0.35, 0.00, -6.95, fx_shockwave_beacon_rotating_red ,
light.2=1, 0.65, 0.00, 5.5, fx_shockwave_beacon_rotating_red ,
light.3=2, -14.00, 40.00, 0.00, fx_shockwave_strobe ,
light.4=2, -14.00, -40.00, 0.00, fx_shockwave_strobe_3 ,
light.5=3, -14.20, -40.00, 0.00, fx_schockwave_navred ,
light.6=3, -14.20, 40.00, 0.00, fx_schockwave_navgre ,
light.7=2, -18.80, 40.00, 0.00, fx_shockwave_strobe ,
light.8=2, -18.80, -40.00, 0.00, fx_shockwave_strobe_3 ,
light.9 = 5, 6.500, -5.5, -3.10, fx_Shockwave_landing_light_narrow // Shockwave light
light.10 = 5, 6.500, 5.5, -3.10, fx_Shockwave_landing_light_narrow // Shockwave light
light.11 = 6, 28.000, 0.60, -8.0, fx_Shockwave_landing_light_narrow // Shockwave light


next is my version of the 190

[LIGHTS]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing
light.0=2, -69.70, 0.50, 2.90, fx_shockwave_strobe_2 ,
light.1=2, 0.35, 0.00, -6.95, fx_shockwave_beacon_rotating_red ,
light.2=1, 0.65, 0.00, 5.5, fx_shockwave_beacon_rotating_red ,
light.3=2, -14.00, 40.00, 0.00, fx_shockwave_strobe ,
light.4=2, -14.00, -40.00, 0.00, fx_shockwave_strobe_3 ,
light.5=3, -14.20, -40.00, 0.00, fx_schockwave_navred ,
light.6=3, -14.20, 40.00, 0.00, fx_schockwave_navgre ,
light.7=2, -20.50, 40.00, 0.00, fx_shockwave_strobe ,
light.8=2, -20,50, -40.00, 0.00, fx_shockwave_strobe_3 ,
light.9 = 5, 6.500, -5.5, -3.10, fx_Shockwave_landing_light_narrow // Shockwave light
light.10 = 5, 6.500, 5.5, -3.10, fx_Shockwave_landing_light_narrow // Shockwave light
light.11 = 6, 35.000, 0.20, -7.0, fx_Shockwave_landing_light_narrow // Shockwave light

make sure you add the lines to the panels

gauge13=shockwave_lights!SW Lights, 1,1,1,1 //shockwave light
gauge14=shockwave_lights!SW Lights_taxi_gear, 1,1,1,1 //shockwave light

cheers

Tks a lot Knowlesc!!

I'll test your great work!!!

All the best!!

Fábio

Hi Knowlesc!!

Great work you have done my friend!!!!!!!!!!!!!!!!!!!

I've made some little changes in your configs (in red). I changed the code number for the nav lights to have them light up (the same occures with the Digital F-70/-100). I have also repositioned the nav lights in the wing (in the EJET 190) and have the tail strobe centered (both). Changed the hight of the lower beacon rotating light. Also put backwards the wing landing lights and disabled the nose light, because they don't desappear with landing gear up. See what you think about those little changes to your fantastic configuration.

EJET 170

[LIGHTS]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing
light.0=2, -57.60, 0.00, 2.90, fx_shockwave_strobe_2 ,
light.1=2, 0.35, 0.00, -6.35, fx_shockwave_beacon_rotating_red , //-6.95
light.2=1, 0.65, 0.00, 5.5, fx_shockwave_beacon_rotating_red ,
light.3=2, -14.00, 40.00, 0.00, fx_shockwave_strobe ,
light.4=2, -14.00, -40.00, 0.00, fx_shockwave_strobe_3 ,
light.5=9, -14.20, -40.00, 0.00, fx_shockwave_navred,
light.6=9, -14.20, 40.00, 0.00, fx_shockwave_navgre,
light.7=2, -18.80, 40.00, 0.00, fx_shockwave_strobe ,
light.8=2, -18.80, -40.00, 0.00, fx_shockwave_strobe_3 ,
light.9=5, 5.000, -5.5, -3.10, fx_Shockwave_landing_light_narrow // Shockwave light
light.10=5, 5.000, 5.5, -3.10, fx_Shockwave_landing_light_narrow // Shockwave light
//light.11=6, 27.550, 0.60, -8.0, fx_Shockwave_landing_light_narrow // Shockwave light

EJET 190

[LIGHTS]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing
light.0=2, -69.70, 0.00, 2.90, fx_shockwave_strobe_2 ,
light.1=2, 0.35, 0.00, -6.35, fx_shockwave_beacon_rotating_red ,
light.2=1, 0.65, 0.00, 5.5, fx_shockwave_beacon_rotating_red ,
light.3=2, -14.00, 40.00, 0.00, fx_shockwave_strobe ,
light.4=2, -14.00, -40.00, 0.00, fx_shockwave_strobe_3 ,
light.5=9, -14.50, -40.90, 0.00, fx_shockwave_navred,
light.6=9, -14.50, 40.90, 0.00, fx_shockwave_navgre,
light.7=2, -20.50, 40.00, 0.00, fx_shockwave_strobe ,
light.8=2, -20,50, -40.00, 0.00, fx_shockwave_strobe_3 ,
light.9 = 5, 5.000, -5.5, -3.10, fx_Shockwave_landing_light_narrow // Shockwave light
light.10 = 5, 5.000, 5.5, -3.10, fx_Shockwave_landing_light_narrow // Shockwave light
//light.11 = 6, 35.000, 0.20, -7.0, fx_Shockwave_landing_light_narrow // Shockwave light

All the best!!

Fábio

Guys, do these lights work in P3Dv4? Do they illuminate ground at night?

Thanks.