Carenado C172N SKYHAWK II SKI
[LIGHTS]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing
light.0 = 3, -3.54, -17.14, 2.52, fx_shockwave_navred
light.1 = 3, -3.54, 17.14, 2.51, fx_shockwave_navgre
light.2 = 1, -20.87, 0.00, 5.20, fx_shockwave_beaconh
light.3 = 4, -2.57, 0.00, 1.60, fx_vclightalabeo172
light.4 = 5, 3.40, 0.10, -1.00, fx_shockwave_landing_light_small_old
light.5 = 6, 3.40, -0.10, -1.00, fx_shockwave_landing_light_small_old
3rd Party Aircraft Config Database HERE
Re: 3rd Party Aircraft Config Database HERE
did you get any help with your problem ?
-
- Airman Basic
- Posts: 5
- Joined: 02 Apr 2008, 17:55
Re: 3rd Party Aircraft Config Database HERE
CARENADO F33A BEECHCRAFT BONANZA
This is the config for the FSX aircraft. The config given in the database (listed as for the V35B and F33A) is erroneous and gives extremely poor placement when used with this aircraft. This is an updated version, complete with working landing and taxi lights - taxi lights will extinguish upon gear raise, landing lights will remain on throughout.
Aircraft.cfg
Panel.cfg
This is the config for the FSX aircraft. The config given in the database (listed as for the V35B and F33A) is erroneous and gives extremely poor placement when used with this aircraft. This is an updated version, complete with working landing and taxi lights - taxi lights will extinguish upon gear raise, landing lights will remain on throughout.
Aircraft.cfg
Code: Select all
[lights]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing
light.0 = 3, -1.4, -15.4, 1.7, fx_shockwave_navred,
light.1 = 3, -1.4, 15.4, 1.7, fx_shockwave_navgre,
light.2 = 3, -19.21, 0.0, 1.8, fx_shockwave_navwhi,
light.3 = 2, -1.0, -15.2, 1.6, fx_shockwave_strobe,
light.4 = 2, -1.0, 15.2, 1.6, fx_shockwave_strobe,
light.5 = 1, -9.6, 0.4, 3.2, fx_shockwave_beacon_rotating_red,
light.6 = 10, -2.0, 0, 2.50, fx_vclightefetres
light.7 = 6, 5.0, 0.0, -1.1, fx_shockwave_landing_light_narrow_no_flare, //fx_shockwave_landing_light_narrow_no_flare
light.8 = 5, 4.7, 0.00, 0.5, fx_shockwave_landing_light_tail_old, //fx_shockwave_landing_light_tail_old
Code: Select all
gauge10=shockwave_lights!SW Lights, 1,1,1,1 //shockwave light
gauge10=shockwave_lights!SW Lights_gear, 1,1,1,1 //shockwave light
Re: 3rd Party Aircraft Config Database HERE
Can someone post there config for the CERA Bell 212and412 payware helis thnxs
Re: 3rd Party Aircraft Config Database HERE
Has anybody else had trouble putting a Landing light in the Carenado 185 Tundra version? I'm not stupid, and I've done plenty of planes so I know I'm doing it right. But the landing light just doesn't show. The taxi is perfect though. Has Carenado done something different to this plane?
Thanks in advance
Thanks in advance
Tony (That's all your getting, like it or lump it)
MSFS i7-7700 Kaby Lake CPU @ 3.60 GHz, 3601 Mhz, 4 Cores (Liquid cooled) Gigabyte B250M-DS3H-CF M/Board 32 Gig DDR4 Ram Nvidia GTX 1080ti 11GB GDDR 5 Win 10 Home Acer Predator XB271HU.
MSFS i7-7700 Kaby Lake CPU @ 3.60 GHz, 3601 Mhz, 4 Cores (Liquid cooled) Gigabyte B250M-DS3H-CF M/Board 32 Gig DDR4 Ram Nvidia GTX 1080ti 11GB GDDR 5 Win 10 Home Acer Predator XB271HU.
-
- Airman Basic
- Posts: 5
- Joined: 02 Apr 2008, 17:55
Re: 3rd Party Aircraft Config Database HERE
CARENADO B58 BEECHCRAFT BARON
As per my Bonanza config, taxi lights will extinguish upon gear raise, landing lights will remain on throughout. Um, to be honest, although they're a pretty good fit, my Landing Lights look just a little weird. I'm having difficulty getting satisfactory placement because of the fuzziness of the landing lights used. If anyone has any better suggestions, please update them, since I don't know when I'll be able to fit in time to redo the placement. Thanks.
Aircraft.cfg
Panel.cfg
As per my Bonanza config, taxi lights will extinguish upon gear raise, landing lights will remain on throughout. Um, to be honest, although they're a pretty good fit, my Landing Lights look just a little weird. I'm having difficulty getting satisfactory placement because of the fuzziness of the landing lights used. If anyone has any better suggestions, please update them, since I don't know when I'll be able to fit in time to redo the placement. Thanks.
Aircraft.cfg
Code: Select all
[LIGHTS]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing
light.0 = 2, -6.55, -18.07, 1.58, fx_strobecarb8 ,
light.1 = 2, -6.85, 18.00, 1.58, fx_strobecarb8 ,
light.2 = 8, -3.30, -13.40, 1.70, fx_icelightcarb8,
light.3 = 10, -11.30, 0.00, 2.90, fx_vclightcarb8,
light.4 = 10, -6.50, 0.00, 3.40, fx_vclightcarb8,
light.5 = 6, 1.0, 0.0, -0.9, fx_shockwave_landing_light_narrow_no_flare, //fx_shockwave_landing_light_narrow_no_flare
light.6 = 5, -1.5, 6.55, 0.5, fx_shockwave_landing_light_tail_old, //fx_shockwave_landing_light_tail_old
light.7 = 5, -1.5, -6.55, 0.5, fx_shockwave_landing_light_tail_old, //fx_shockwave_landing_light_tail_old
Code: Select all
gauge08=shockwave_lights!SW Lights, 1,1,1,1 //shockwave light
Re: 3rd Party Aircraft Config Database HERE
so no one has the config for the cera bell 212 that they can happily share with the rest of us
Re: 3rd Party Aircraft Config Database HERE
I was wondering if Anyone has setup for Captain Sim 757-200 and 300 with winglets and without? There is one here, however i have no idea if it has winglets or not.
Re: 3rd Party Aircraft Config Database HERE
Not sure if anyone's done the A51 UH-1Y Venom, but here's my go (and my first) at "reduxing" the lighting ...
Oh! Has anyone figured out how to apply the redux lights to the new Virtavia Sea King?
~nato
Code: Select all
light.0 = 3, 2.73, -3.66, 3.85, fx_shockwave_navred
light.1 = 3, 2.73, 3.63, 3.85, fx_shockwave_navgre
light.2 = 3, -27.56, 0.01, 1.13, fx_shockwave_navwhi
light.3 = 3, 6.26, -3.6, -0.51, fx_shockwave_navred
light.4 = 4, 4.50, 0, 3.18, fx_shockwave_vclight
light.5 = 4, 10.1, 1.8, 2.6, fx_shockwave_vclight
light.6 = 3, 10.1, -1.8, 2.6, fx_shockwave_vclight
light.7 = 1, -1.69, 0, 8.13, fx_shockwave_beaconh_lowl
light.8 = 1, 3.78, 0, -1.88, fx_shockwave_beaconb_lowl
light.9 = 3, 6.26, 3.61, -0.51, fx_shockwave_navgre
~nato
-
- Airman Basic
- Posts: 5
- Joined: 27 Jul 2011, 16:40
Re: 3rd Party Aircraft Config Database HERE
i have a few aircaft cfg lights entrys some people might find usefull it took a good 4 hours of replacing the file names then tweeking the new landing light entry for the jetranger III so it was in the right spot
owen hewitt's bell 206B III jetranger, kiowa and tv model from hovercontrol
[LIGHTS]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit
light.0 = 3, -14.44, -3.26, 1.95, Fx_shockwave_navred ,
light.1 = 3, -14.44, 3.26, 1.95, Fx_shockwave_navgre ,
light.2 = 3, -23.08, 0.00, 2.77, fx_navwhi ,
light.3 = 1, -22.47, 0.62, 6.70, Fx_shockwave_beacon ,
light.4 = 4, 2.00, 0.00, 1.50, Fx_shockwave_vclight ,
light.5 = 5, 6.51, 0.00, -2.10, fx_shockwave_landing_light_narrow_down_22 ,
bell 205 LCSD also from hovercontrol
[LIGHTS]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit
light.0=3, 9.95, -3.9, 5.25, Fx_shockwave_navred ,
light.1=3, 9.95, 3.9, 5.25, Fx_shockwave_navgre ,
light.2=1, 1.38, 0.00, 7.60, Fx_shockwave_beacon_rotating_red ,
light.3=3, -18.52, 0.00, 6.37, fx_navwhi ,
light.4=3, 13.90, 3.50, 0.6, Fx_shockwave_navgre ,
light.5=3, 13.90, -3.50, 0.6, Fx_shockwave_navred ,
//light.6=4, 15.5, 0.00, 3.2, Fx_shockwave_vclight ,
light.7=4, 17.0, 1.80, 3.2, Fx_shockwave_vclight ,
light.8=4, 17.0, -1.80, 3.2, Fx_shockwave_vclight ,
the heli does not appear to have any landing lights so i didnt bother adding any to the cfg
Massimo Taccoli's canadair cl215 waterbomber/seaplane
[Lights]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing
light.0 = 3, -0.85, -48.10, 0.15, Fx_shockwave_navred ,
light.1 = 3, -0.85, 48.10, 0.15, Fx_shockwave_navgre ,
light.2 = 3, -39.25, 0.00, -2.00, fx_navwhi ,
light.3 = 2, -1.10, -48.10, 0.15, Fx_shockwave_strobe ,
light.4 = 2, -1.10, 48.10, 0.15, Fx_shockwave_strobe_2 ,
light.5 = 1, -36.40, 0.00, 17.20, Fx_shockwave_beacon_rotating_red ,
light.6 = 4, 15.25, 2.26, -1.73, Fx_shockwave_vclight ,
light.7 = 4, 15.25, -2.26, -1.73, Fx_shockwave_vclight ,
will be edited later to add the same landing lights as the default dc-3 as its an older style radial engined plane and they look good on there
these are all fs9 aircraft
owen hewitt's bell 206B III jetranger, kiowa and tv model from hovercontrol
[LIGHTS]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit
light.0 = 3, -14.44, -3.26, 1.95, Fx_shockwave_navred ,
light.1 = 3, -14.44, 3.26, 1.95, Fx_shockwave_navgre ,
light.2 = 3, -23.08, 0.00, 2.77, fx_navwhi ,
light.3 = 1, -22.47, 0.62, 6.70, Fx_shockwave_beacon ,
light.4 = 4, 2.00, 0.00, 1.50, Fx_shockwave_vclight ,
light.5 = 5, 6.51, 0.00, -2.10, fx_shockwave_landing_light_narrow_down_22 ,
bell 205 LCSD also from hovercontrol
[LIGHTS]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit
light.0=3, 9.95, -3.9, 5.25, Fx_shockwave_navred ,
light.1=3, 9.95, 3.9, 5.25, Fx_shockwave_navgre ,
light.2=1, 1.38, 0.00, 7.60, Fx_shockwave_beacon_rotating_red ,
light.3=3, -18.52, 0.00, 6.37, fx_navwhi ,
light.4=3, 13.90, 3.50, 0.6, Fx_shockwave_navgre ,
light.5=3, 13.90, -3.50, 0.6, Fx_shockwave_navred ,
//light.6=4, 15.5, 0.00, 3.2, Fx_shockwave_vclight ,
light.7=4, 17.0, 1.80, 3.2, Fx_shockwave_vclight ,
light.8=4, 17.0, -1.80, 3.2, Fx_shockwave_vclight ,
the heli does not appear to have any landing lights so i didnt bother adding any to the cfg
Massimo Taccoli's canadair cl215 waterbomber/seaplane
[Lights]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing
light.0 = 3, -0.85, -48.10, 0.15, Fx_shockwave_navred ,
light.1 = 3, -0.85, 48.10, 0.15, Fx_shockwave_navgre ,
light.2 = 3, -39.25, 0.00, -2.00, fx_navwhi ,
light.3 = 2, -1.10, -48.10, 0.15, Fx_shockwave_strobe ,
light.4 = 2, -1.10, 48.10, 0.15, Fx_shockwave_strobe_2 ,
light.5 = 1, -36.40, 0.00, 17.20, Fx_shockwave_beacon_rotating_red ,
light.6 = 4, 15.25, 2.26, -1.73, Fx_shockwave_vclight ,
light.7 = 4, 15.25, -2.26, -1.73, Fx_shockwave_vclight ,
will be edited later to add the same landing lights as the default dc-3 as its an older style radial engined plane and they look good on there
these are all fs9 aircraft
-
- Airman Basic
- Posts: 5
- Joined: 27 Jul 2011, 16:40
Re: 3rd Party Aircraft Config Database HERE
Peertje767 wrote:Hi there,
I'm using this great add on. But i found that when using the right lines in my aircraft.cfg and Panel.cfg, that the red beacon light
on top of the 747 is not on the right place. it is to much forward.
It is for the PMDG 747-400F. I tried to google and search here on the forum, but did not find anything.
Is there a way to fix this?
Thx. and keep up the great work.
Peter
i would suggest editing the first set of numbers in the line as its the position forward or reverse of the 0.00 position if its too far forward try reducing by a factor of 1.00 or more till it gets close then fine tune it by adding to the .00 with something like a .85 untill its in the right spot they are set up like this 1.00x foward or -1.00x for aft 1.00y for left -1.00 for right 1.00z for above -1.00z for below is the middle of the plane if you put something like 2.30 it will be too the left of the center -2.30 and its right and the last set of numbers is the height offset from 0.00 it takes time to correctly position the lights using this process. i always make a change save the cfg then open up fs9 to see where the light is at exactly if its still not right i change some more till it is.
-
- Airman Basic
- Posts: 5
- Joined: 27 Jul 2011, 16:40
Re: 3rd Party Aircraft Config Database HERE
did you add theMike Mouthaan wrote:Hello everybody,
Please could anybody help me?
I had installed the 3D lights for my PMDG Boeing 737 before I rebooted my PC, after rebooting I installed again with the configuration in the file on this forum, but now, when I retracted the landing gear, the lights of the nose wheel are still burning. Could anybody help me to fix it?
My current settings in Aircraft.cfg:
So, maybe could anybody also say what I have to do for the PMDG Boeing 747, with the same problem?Code: Select all
PMDG Boeing 737-800W [LIGHTS] light.0 = 2, -130.000, 0.090, 5.989, fx_strobe_pmdg, //Aft Strobe light.2 = 1, -51.750, 0.000, 8.700, fx_beaconh_pmdg, //Top Beacon Blink light.3 = 1, -65.900, 0.000, -5.600, fx_beaconh_pmdg, //Bottom Beacon Blink light.4 = 3, -79.000, -55.665, 2.100, fx_navred_pmdg, //Left Nav Light red light.5 = 2, -80.000, -55.986, 2.100, fx_strobe_pmdg, //Left Strobe light.6 = 3, -79.000, 55.665, 2.100, fx_navgre_pmdg, //Right Nav Light green light.7 = 2, -80.000, 56.200, 2.100, fx_strobe_pmdg, //Right Strobe light.8 = 3, -84.800, -56.737, 1.800, fx_navwhi_pmdg, //Left Position Light light.9 = 3, -84.800, 56.691, 1.800, fx_navwhi_pmdg, //Right Position Light light.10 = 3,-130.000, -0.090, 5.989, fx_navwhi_pmdg, //Aft Position Light light.11 = 5, -51.60, -6.50, -1.70, fx_shockwave_landing_light_narrow.fx // Shockwave light light.12 = 5, -51.60, 6.50, -1.70, fx_shockwave_landing_light_narrow.fx // Shockwave light light.13 = 6, -14.00, 0.00, -4.50, fx_Shockwave_landing_light_small.FX // Shockwave light light.14 = 5, -52.30, -2.50, -5.30, fx_shockwave_landing_light_narrow_down // Shockwave light light.15 = 5, -52.30, 2.50, -5.30, fx_shockwave_landing_light_narrow_down // Shockwave light light.16 = 5, -12.80, 0.00, -7.6, fx_shockwave_landing_light_narrow // shockwave light light.17 = 8, -51.60, -6.50, -1.70, fx_shockwave_landing_light_narrow_down.fx // Shockwave light light.18 = 8, -51.60, 6.50, -1.70, fx_shockwave_landing_light_narrow_down.fx // Shockwave light
So, what I have to add, change or whatever...
Regards,
Mike Mouthaan
gaugeXX=shockwave_lights!SW Lights_gear, 1,1,1,1 //shockwave light entry to the panel?
Re: 3rd Party Aircraft Config Database HERE
Hello everyone,
I was wondering if anyone had the settings for the lights on a Wilco/Feelthere E-Jets v.2 Embraer 175 and 195?
Thanks,
Ed
I was wondering if anyone had the settings for the lights on a Wilco/Feelthere E-Jets v.2 Embraer 175 and 195?
Thanks,
Ed
Ed Smoker Sr.
Re: 3rd Party Aircraft Config Database HERE
Aerosoft PZL Wilga 35A (FSX)
[LIGHTS]
light.0 = 3, 0.527, -18.36, 4.078, fx_navred
light.1 = 3, 0.627, 18.36, 4.058, fx_navgre
light.4 = 7, 5.00, -1.50, 0.20, cs3_air_L
light.5 = 4, 2.07, 0.00, 2.45, fx_vclight
light.6 = 10, -2.07, 0.00, 2.45, fx_vclight
light.7 = 5, 2.8, -17.97, 3.8, fx_Shockwave_landing_light_tail // Shockwave light
[LIGHTS]
light.0 = 3, 0.527, -18.36, 4.078, fx_navred
light.1 = 3, 0.627, 18.36, 4.058, fx_navgre
light.4 = 7, 5.00, -1.50, 0.20, cs3_air_L
light.5 = 4, 2.07, 0.00, 2.45, fx_vclight
light.6 = 10, -2.07, 0.00, 2.45, fx_vclight
light.7 = 5, 2.8, -17.97, 3.8, fx_Shockwave_landing_light_tail // Shockwave light
Re: 3rd Party Aircraft Config Database HERE
Wilco Jump Jet:
light.0 = 3, -7.8, -12.2, -0.25, fx_shockwave_navred
light.1 = 3, -7.8, 11.9, -0.2, fx_shockwave_navgre
light.2 = 3, -22.75, 0, -0.5, fx_shockwave_navwhi
light.3 = 2, -7.75, -12, -0.4, fx_shockwave_strobe_sm
light.4 = 2, -7.75, 12, -0.4, fx_shockwave_strobe_sm
light.5 = 2, -11.2, 0, -1.4, fx_shockwave_strobe_lowl
light.6 = 1, -7.89, 0, 3.5, fx_shockwave_beaconh_lowl
light.7 = 1, -11.4, 0, -1.35, fx_shockwave_beaconb_lowl
light.8 = 6, 11.5, 0, 2.76, fx_shockwave_vclight
light.9 = 5, 6.5, -.1, -3.4, fx_shockwave_landing_light
light.10 = 8, -4, 4, -5, fx_RCB_Smoke90, //Smoke Downwards
light.11 = 8, -4, -4, -5, fx_RCB_Smoke90, //Smoke Downwards
light.12 = 10, -4, 4, -5, fx_RCB_Smoke45, //Smoke 45 degrees
light.13 = 10, -4, -4, -5, fx_RCB_Smoke45, //Smoke 45 degrees
light.14 = 9, -15, 4, 0, fx_RCB_Smoke0, //Smoke Backwards
light.15 = 9, -15, -4, 0, fx_RCB_Smoke0, //Smoke Backwards
light.16 = 7, 3, -2, -2.3, fx_RCB_Cannon3,
light.17 = 7, 3, 2, -2.3, fx_RCB_Cannon3,
Take note that light.8 was added by me and ties into the taxi lights to turn on cockpit lighting since I could not get the cockpit light to work. Make sure you have the latest update for the Shockwave lights.
Also I've added light.9 which places a landing light beam from the nose gear as I could also not get the landing light to work. If you choose to keep this addition then you should also go into the Harrier's panel.cfg (after making a backup) and add the following line to end of the [Vcockpit01] section:
gauge07=shockwave_lights!SW Lights_gear , 1,1,1,1 //shockwave light
This will make the landing light automatically switch off when you raise the gear. You will need to turn it back on when the gear is lowered however.
light.0 = 3, -7.8, -12.2, -0.25, fx_shockwave_navred
light.1 = 3, -7.8, 11.9, -0.2, fx_shockwave_navgre
light.2 = 3, -22.75, 0, -0.5, fx_shockwave_navwhi
light.3 = 2, -7.75, -12, -0.4, fx_shockwave_strobe_sm
light.4 = 2, -7.75, 12, -0.4, fx_shockwave_strobe_sm
light.5 = 2, -11.2, 0, -1.4, fx_shockwave_strobe_lowl
light.6 = 1, -7.89, 0, 3.5, fx_shockwave_beaconh_lowl
light.7 = 1, -11.4, 0, -1.35, fx_shockwave_beaconb_lowl
light.8 = 6, 11.5, 0, 2.76, fx_shockwave_vclight
light.9 = 5, 6.5, -.1, -3.4, fx_shockwave_landing_light
light.10 = 8, -4, 4, -5, fx_RCB_Smoke90, //Smoke Downwards
light.11 = 8, -4, -4, -5, fx_RCB_Smoke90, //Smoke Downwards
light.12 = 10, -4, 4, -5, fx_RCB_Smoke45, //Smoke 45 degrees
light.13 = 10, -4, -4, -5, fx_RCB_Smoke45, //Smoke 45 degrees
light.14 = 9, -15, 4, 0, fx_RCB_Smoke0, //Smoke Backwards
light.15 = 9, -15, -4, 0, fx_RCB_Smoke0, //Smoke Backwards
light.16 = 7, 3, -2, -2.3, fx_RCB_Cannon3,
light.17 = 7, 3, 2, -2.3, fx_RCB_Cannon3,
Take note that light.8 was added by me and ties into the taxi lights to turn on cockpit lighting since I could not get the cockpit light to work. Make sure you have the latest update for the Shockwave lights.
Also I've added light.9 which places a landing light beam from the nose gear as I could also not get the landing light to work. If you choose to keep this addition then you should also go into the Harrier's panel.cfg (after making a backup) and add the following line to end of the [Vcockpit01] section:
gauge07=shockwave_lights!SW Lights_gear , 1,1,1,1 //shockwave light
This will make the landing light automatically switch off when you raise the gear. You will need to turn it back on when the gear is lowered however.
Drew Sikora
Staff Reviewer, AVSIM
Beta Tester, REX Essential
Founder/Designer, MegaSceneryEarth Airports
Staff Reviewer, AVSIM
Beta Tester, REX Essential
Founder/Designer, MegaSceneryEarth Airports
Who is online
Users browsing this forum: No registered users and 29 guests