The A2A Simulations Community

"Come share your passion for flight"
It is currently Tue Feb 19, 2019 4:51 am

All times are UTC - 5 hours




Post new topic Reply to topic  [ 5 posts ] 
Author Message
PostPosted: Sun Jul 13, 2008 10:14 am 
Offline
Airman

Joined: Mon Dec 10, 2007 6:26 am
Posts: 16
Hi all,

Did someone give a try to configure the lights for the Wilco/Feelthere EJET 170/190???

Regards and tks in advance!!!

Fábio


Top
 Profile  
 
PostPosted: Sun Jul 13, 2008 7:06 pm 
Offline
Airman

Joined: Fri Aug 17, 2007 7:19 pm
Posts: 31
Here is my work

first is the 170

[LIGHTS]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing
light.0=2, -57.60, 0.50, 2.90, fx_shockwave_strobe_2 ,
light.1=2, 0.35, 0.00, -6.95, fx_shockwave_beacon_rotating_red ,
light.2=1, 0.65, 0.00, 5.5, fx_shockwave_beacon_rotating_red ,
light.3=2, -14.00, 40.00, 0.00, fx_shockwave_strobe ,
light.4=2, -14.00, -40.00, 0.00, fx_shockwave_strobe_3 ,
light.5=3, -14.20, -40.00, 0.00, fx_schockwave_navred ,
light.6=3, -14.20, 40.00, 0.00, fx_schockwave_navgre ,
light.7=2, -18.80, 40.00, 0.00, fx_shockwave_strobe ,
light.8=2, -18.80, -40.00, 0.00, fx_shockwave_strobe_3 ,
light.9 = 5, 6.500, -5.5, -3.10, fx_Shockwave_landing_light_narrow // Shockwave light
light.10 = 5, 6.500, 5.5, -3.10, fx_Shockwave_landing_light_narrow // Shockwave light
light.11 = 6, 28.000, 0.60, -8.0, fx_Shockwave_landing_light_narrow // Shockwave light


next is my version of the 190

[LIGHTS]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing
light.0=2, -69.70, 0.50, 2.90, fx_shockwave_strobe_2 ,
light.1=2, 0.35, 0.00, -6.95, fx_shockwave_beacon_rotating_red ,
light.2=1, 0.65, 0.00, 5.5, fx_shockwave_beacon_rotating_red ,
light.3=2, -14.00, 40.00, 0.00, fx_shockwave_strobe ,
light.4=2, -14.00, -40.00, 0.00, fx_shockwave_strobe_3 ,
light.5=3, -14.20, -40.00, 0.00, fx_schockwave_navred ,
light.6=3, -14.20, 40.00, 0.00, fx_schockwave_navgre ,
light.7=2, -20.50, 40.00, 0.00, fx_shockwave_strobe ,
light.8=2, -20,50, -40.00, 0.00, fx_shockwave_strobe_3 ,
light.9 = 5, 6.500, -5.5, -3.10, fx_Shockwave_landing_light_narrow // Shockwave light
light.10 = 5, 6.500, 5.5, -3.10, fx_Shockwave_landing_light_narrow // Shockwave light
light.11 = 6, 35.000, 0.20, -7.0, fx_Shockwave_landing_light_narrow // Shockwave light

make sure you add the lines to the panels

gauge13=shockwave_lights!SW Lights, 1,1,1,1 //shockwave light
gauge14=shockwave_lights!SW Lights_taxi_gear, 1,1,1,1 //shockwave light

cheers


:D


Top
 Profile  
 
 Post subject:
PostPosted: Sun Jul 13, 2008 7:57 pm 
Offline
Airman

Joined: Mon Dec 10, 2007 6:26 am
Posts: 16
Tks a lot Knowlesc!!

I'll test your great work!!!

All the best!!

Fábio


Top
 Profile  
 
 Post subject:
PostPosted: Sun Jul 13, 2008 10:40 pm 
Offline
Airman

Joined: Mon Dec 10, 2007 6:26 am
Posts: 16
Hi Knowlesc!!

Great work you have done my friend!!!!!!!!!!!!!!!!!!!

I've made some little changes in your configs (in red). I changed the code number for the nav lights to have them light up (the same occures with the Digital F-70/-100). I have also repositioned the nav lights in the wing (in the EJET 190) and have the tail strobe centered (both). Changed the hight of the lower beacon rotating light. Also put backwards the wing landing lights and disabled the nose light, because they don't desappear with landing gear up. See what you think about those little changes to your fantastic configuration.

EJET 170

[LIGHTS]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing
light.0=2, -57.60, 0.00, 2.90, fx_shockwave_strobe_2 ,
light.1=2, 0.35, 0.00, -6.35, fx_shockwave_beacon_rotating_red , //-6.95
light.2=1, 0.65, 0.00, 5.5, fx_shockwave_beacon_rotating_red ,
light.3=2, -14.00, 40.00, 0.00, fx_shockwave_strobe ,
light.4=2, -14.00, -40.00, 0.00, fx_shockwave_strobe_3 ,
light.5=9, -14.20, -40.00, 0.00, fx_shockwave_navred,
light.6=9, -14.20, 40.00, 0.00, fx_shockwave_navgre,

light.7=2, -18.80, 40.00, 0.00, fx_shockwave_strobe ,
light.8=2, -18.80, -40.00, 0.00, fx_shockwave_strobe_3 ,
light.9=5, 5.000, -5.5, -3.10, fx_Shockwave_landing_light_narrow // Shockwave light
light.10=5, 5.000, 5.5, -3.10, fx_Shockwave_landing_light_narrow // Shockwave light

//light.11=6, 27.550, 0.60, -8.0, fx_Shockwave_landing_light_narrow // Shockwave light

EJET 190

[LIGHTS]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing
light.0=2, -69.70, 0.00, 2.90, fx_shockwave_strobe_2 ,
light.1=2, 0.35, 0.00, -6.35, fx_shockwave_beacon_rotating_red ,
light.2=1, 0.65, 0.00, 5.5, fx_shockwave_beacon_rotating_red ,
light.3=2, -14.00, 40.00, 0.00, fx_shockwave_strobe ,
light.4=2, -14.00, -40.00, 0.00, fx_shockwave_strobe_3 ,
light.5=9, -14.50, -40.90, 0.00, fx_shockwave_navred,
light.6=9, -14.50, 40.90, 0.00, fx_shockwave_navgre,

light.7=2, -20.50, 40.00, 0.00, fx_shockwave_strobe ,
light.8=2, -20,50, -40.00, 0.00, fx_shockwave_strobe_3 ,
light.9 = 5, 5.000, -5.5, -3.10, fx_Shockwave_landing_light_narrow // Shockwave light
light.10 = 5, 5.000, 5.5, -3.10, fx_Shockwave_landing_light_narrow // Shockwave light

//light.11 = 6, 35.000, 0.20, -7.0, fx_Shockwave_landing_light_narrow // Shockwave light

All the best!!

Fábio


Top
 Profile  
 
PostPosted: Tue Feb 05, 2019 6:08 am 
Offline
Airman Basic

Joined: Thu Apr 11, 2013 7:09 am
Posts: 9
Guys, do these lights work in P3Dv4? Do they illuminate ground at night?

Thanks.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group