...to do this one. I have Nath's old one, but still.
Download.
Edit: This is from P3d V4 but she does not work properly. The worst problem being, is she hits a brick wall if you apply full flaps and falls out of the sky if airborne.
I just felt compelled...
- bladerunner900
- Senior Master Sergeant
- Posts: 1991
- Joined: 17 Aug 2008, 14:59
- Location: South Wales
I just felt compelled...
Last edited by bladerunner900 on 22 Nov 2019, 09:38, edited 1 time in total.
-
- Technical Sergeant
- Posts: 899
- Joined: 30 Nov 2014, 19:07
- Location: US
- Contact:
- bladerunner900
- Senior Master Sergeant
- Posts: 1991
- Joined: 17 Aug 2008, 14:59
- Location: South Wales
Re: I just felt compelled...
I did think about that and if I could find some HD images of all those I could probably do it. I've increased the resolution of the b17g_1_t.dds file for the nose art so they would stand a chance of being legible. I did a quick test and would probably have to go to 8K for that one to do them justice.
Just for information. 4k seems feasible but would depend on the size of the signature.
Just for information. 4k seems feasible but would depend on the size of the signature.
Re: I just felt compelled...
That really looks good and provides more strength to the temptation to get FSX-SE reinstalled. That’s a really nice work, though. I would see “Nine-O-Nine†reliably every Spring and they would reliably roar over my house on their way further North!
Re: I just felt compelled...
Bladerunner900,
I have a HD picture of the signatures from when I had my flight on her in Jan 2013. I would be happy to send you a copy by PM here on A2A, or by email, if that would be OK with you. It looks like there are almost all the signatures shown but there may be a few that were out of the picture.
Let me know.
Lyn
I have a HD picture of the signatures from when I had my flight on her in Jan 2013. I would be happy to send you a copy by PM here on A2A, or by email, if that would be OK with you. It looks like there are almost all the signatures shown but there may be a few that were out of the picture.
Let me know.
Lyn
[*]2021 Jetline Systems GTX, [email protected], EVGA RTX 3080ti 12GB, 64GB Memory 3200MHz, Win11 64 Pro, P3DV5.3, FS2020
In memory of my fallen Brothers in Arms in Viet Nam - may they Rest in Peace.
In memory of my fallen Brothers in Arms in Viet Nam - may they Rest in Peace.
- bladerunner900
- Senior Master Sergeant
- Posts: 1991
- Joined: 17 Aug 2008, 14:59
- Location: South Wales
Re: I just felt compelled...
Hello Lyn.
I can but give it a go. PM sent.
I can but give it a go. PM sent.
Re: I just felt compelled...
Email sent.
[*]2021 Jetline Systems GTX, [email protected], EVGA RTX 3080ti 12GB, 64GB Memory 3200MHz, Win11 64 Pro, P3DV5.3, FS2020
In memory of my fallen Brothers in Arms in Viet Nam - may they Rest in Peace.
In memory of my fallen Brothers in Arms in Viet Nam - may they Rest in Peace.
-
- Technical Sergeant
- Posts: 899
- Joined: 30 Nov 2014, 19:07
- Location: US
- Contact:
Re: I just felt compelled...
That's really cool, I look forward to seeing (and flying) it! My hat's off to you repainters anyway, but the names look like a massive undertaking!
- bladerunner900
- Senior Master Sergeant
- Posts: 1991
- Joined: 17 Aug 2008, 14:59
- Location: South Wales
Re: I just felt compelled...
Being realistic I don't think I can do it. There's allot towards the top I can't read let alone lift off. Then there's some on the bottom with the same problem. I've actually found a font that looks identical to the one used, but I can't read them. It's a shame.
Sorry guys.
Sorry guys.
Re: I just felt compelled...
Steve,
I was afraid that with the curvature of the fuselage that it would be pretty difficult to do but it was worth a try.
I have downloaded the repaint and it looks great!
Thanks.
Lyn
I was afraid that with the curvature of the fuselage that it would be pretty difficult to do but it was worth a try.
I have downloaded the repaint and it looks great!
Thanks.
Lyn
[*]2021 Jetline Systems GTX, [email protected], EVGA RTX 3080ti 12GB, 64GB Memory 3200MHz, Win11 64 Pro, P3DV5.3, FS2020
In memory of my fallen Brothers in Arms in Viet Nam - may they Rest in Peace.
In memory of my fallen Brothers in Arms in Viet Nam - may they Rest in Peace.
-
- Technical Sergeant
- Posts: 899
- Joined: 30 Nov 2014, 19:07
- Location: US
- Contact:
Re: I just felt compelled...
I don't know how much more you want to put into this but maybe it would be worth contacting Collings and see if they have photo documentation of the names? I know they have bigger stuff to worry about right now but if you explain what you're doing and show them the repaint you've already done you might find someone willing to help.
- bladerunner900
- Senior Master Sergeant
- Posts: 1991
- Joined: 17 Aug 2008, 14:59
- Location: South Wales
Re: I just felt compelled...
There is no way that I am going to be bothering the Collings Foundation with this right now.
- Lewis - A2A
- A2A Lieutenant Colonel
- Posts: 33321
- Joined: 06 Nov 2004, 23:22
- Location: Norfolk UK
- Contact:
Re: I just felt compelled...
That's a nice little tribute on your part Bladerunner, good job.
cheers,
Lewis
cheers,
Lewis
A2A Facebook for news live to your social media newsfeed
A2A Youtube because a video can say a thousand screenshots,..
A2A Simulations Twitter for news live to your social media newsfeed
A2A Simulations Community Discord for voice/text chat
A2A Youtube because a video can say a thousand screenshots,..
A2A Simulations Twitter for news live to your social media newsfeed
A2A Simulations Community Discord for voice/text chat
Who is online
Users browsing this forum: No registered users and 27 guests