my b17 control settings

[alan CXA651]

Hi.
I thought I would share my b17 control setup , which is a combination of FSUIPC/A2A configurator settings.
These settings are for CH yoke/rudder peddles and 2 CH quad throttle units allows for individual control of throttles/props/mixtures of all 4 engines, some of my settings that may not be showing is I have park brake/foot brakes/flaps in a standard setup for all my aircraft in FSUIPC

my FSUIPC settings are:-

[Profile.A2A B17]
1=Boeing B-17G 350th BS
2=Boeing B-17G 774th BS
3=Boeing B-17G 709th BS
4=Boeing B-17G
5=Boeing B-17G "RAF Fortress III BU-E"
6=Boeing B-17G "RAF Fortress III U3-E"

[Axes.A2A B17]
RangeRepeatRate=10
0=0X,256,F,66387,0,0,0
1=0Y,256,F,66388,0,0,0
2=0Z,1,D,3,0,0,0
3=1X,1,D,19,0,0,0
4=1Y,1,D,20,0,0,0
5=1Z,1,D,13,0,0,0
6=1R,1,D,14,0,0,0
7=1U,1,D,16,0,0,0
8=1V,1,D,15,0,0,0
9=2X,1,D,1,0,0,0
10=2Y,256,D,2,0,0,0
11=3X,1,D,9,0,0,0
12=3Y,1,D,10,0,0,0
13=3Z,1,D,11,0,0,0
14=3R,1,D,12,0,0,0
15=3U,1,D,18,0,0,0
16=3V,1,D,17,0,0,0
17=4X,1,F,65766,0,0,0

[JoystickCalibration.A2A B17]
AllowSuppressForPFCquad=Yes
ExcludeThrottleSet=No
ExcludeMixtureSet=No
ExcludePropPitchSet=No
SepRevsJetsOnly=No
ApplyHeloTrim=No
UseAxisControlsForNRZ=No
FlapsSetControl=0
FlapDetents=No
ReverserControl=66292
Reverser1Control=66422
Reverser2Control=66425
Reverser3Control=66428
Reverser4Control=66431
MaxThrottleForReverser=256
AileronTrimControl=66731
RudderTrimControl=66732
CowlFlaps1Control=66162
CowlFlaps2Control=66163
CowlFlaps3Control=66164
CowlFlaps4Control=66165
SteeringTillerControl=0
MaxSteerSpeed=60
Aileron=-16384,0,0,16256
SlopeAileron=3
Elevator=-16384,0,0,15872
SlopeElevator=5
Rudder=-16384,0,0,16256
SlopeRudder=3
LeftBrake=-16000,16384/16
RightBrake=-16256,16384/16
Throttle1=-16384,-512,512,16383/32
Reverser=0,0
Throttle2=-16384,-512,512,16383/32
Throttle3=-16384,-512,512,16383/32
Throttle4=-16384,-512,512,16383/32
Mixture2=-16384,8192,8192,16383/32
Mixture3=-16384,8192,8192,16383/32
Mixture4=-16384,8192,8192,16383/32
PropPitch2=-16384,0,512,16383/32
PropPitch3=-16384,0,512,16383/32
PropPitch4=-16384,0,512,16383/32
MapProp=Yes
MapMixture=Yes
ElevatorTrim=-16384,0,0,16383/8

[Buttons.A2A B17]
0=P1,8,C66079,0
3=P1,9,C66080,0
5=P1,11,C65603,0
7=P1,10,C65595,0
9=U1,8,C66080,0
10=U1,9,C66079,0

A2A configurator settings:-

axis settings
pro flight Cessna Trim Wheel/XAxis/invert ticked
switches
select engine 1/ joystick:2:button:0
select engine 2/ joystick:2:button:2
select engine 3/ joystick:2:button:4
select engine 4/ joystick:2:button:6
select all engines/joystick:2:button:1
starter start/ joystick:2:button:5
starter mesh/ joystick:2:button:7
primer selector + / joystick:2:button:8
primer selector - / joystick:2:button:9
magneto Inc. / joystick:1:button:0
magneto Dec. / joystick:1:button:1
fire extinguisher selector + / joystick:2:buton:10
fire extinguisher selector - / joystick:2:button:11
reason Saitek elevator trim wheel is in a2a configurator is it would not work in fsuipc don't know why.
The setup allows me to do individual mag checks/prop checks inflight shutdowns/restarts
regards alan.

[n421nj]

How can i copy these and put in my fsuipc?

[alan CXA651]

Hi Andrew.
I am assuming you have the licenced version of FSUIPC, that allows you to make control input settings.
Also some of the b17 controls on mine go through the a2a configurator.
If you have the same controllers as me , then make a copy of your FSUIPC.INI file , and put this in a place where you can find it easyily , so if you make a corruption of the ini file while editing , you can put it back as was.
Then using notepad,open the FSUIPC.INI file in fsx/modules folder , copy above and paste into your FSUIPC.INI file , and save ,you will still need to set up things like flaps/footbrakes as i have a standard file in FSUIPC.ini that i aply to all my aircraft controls , within FSUIPC.
But be warned , you might still have to tweak the settings as your controlers might have a slight difference in movements.
If you still need help , then let me know.
Regards alan.