I installed P3Dv4 but id does not recognize my Fighter Stick neither my Pro Pedals. I looked for various forum but could not find any info.
In P3D, it appears as "CONTROL001& and "CONTROL002" and can't be calibrated.
Any idea ?
CH Products on P3Dv4
- guillaume78150
- Staff Sergeant
- Posts: 467
- Joined: 08 Oct 2015, 06:07
- Location: North Burgundy
- Contact:
Re: CH Products on P3Dv4
My CH Pro pedals work in P3D4. Have you checked Devices/Printers in the Windows Control Panel to make sure Windows recognizes them and that they're functioning properly?
- guillaume78150
- Staff Sergeant
- Posts: 467
- Joined: 08 Oct 2015, 06:07
- Location: North Burgundy
- Contact:
Re: CH Products on P3Dv4
Yes, they work perfectly well with FSX on the same computer.
Strange, I read about some issues with P3Dv3, but nothing on v4...
Strange, I read about some issues with P3Dv3, but nothing on v4...
Re: CH Products on P3Dv4
Strange! Are you running P3D as Administrator?
- guillaume78150
- Staff Sergeant
- Posts: 467
- Joined: 08 Oct 2015, 06:07
- Location: North Burgundy
- Contact:
Re: CH Products on P3Dv4
When I used CH hardware I always had CH control manger installed and even if you don't use the programing features it added stability to all my CH devices. Might be worth a try. You can always uninstall it.
http://www.chproducts.com/Flight-Sim-Yo ... d-705.html
http://www.chproducts.com/Flight-Sim-Yo ... d-705.html
- guillaume78150
- Staff Sergeant
- Posts: 467
- Joined: 08 Oct 2015, 06:07
- Location: North Burgundy
- Contact:
Re: CH Products on P3Dv4
Thanks, I uninstalled the control manager but it did not change anything.
I will reinstall and see. Bad day, for any reason, it crashed my FSX installation and I'm now facing full reinstallation… With Orbx stuff, it will take hours...
I will reinstall and see. Bad day, for any reason, it crashed my FSX installation and I'm now facing full reinstallation… With Orbx stuff, it will take hours...
-
- A2A Major
- Posts: 1177
- Joined: 01 Jun 2012, 18:02
Re: CH Products on P3Dv4
At some point during one of the P3D version updates, possible with v3, it stopped detecting my CH products correctly and auto-assigning a default button/axis layout like FSX does. Mine are labeled "controller 001, 002" etc as well. Are you able to even assign things (buttons and axes) properly? I have to go through and delete the erroneous default assignments, then add my own. It's a tedious process but once you get it down, you should be good to go.
CH Products on P3Dv4
I just two days ago migrated to P3D v4 and used the following linked post to successfully set up my CH hardware. The yoke and pedals perform beautifully now. https://www.prepar3d.com/forum/viewtopic.php?t=128881
And...congratulations Molly on your promotion!
Sent from my iPad using Tapatalk
And...congratulations Molly on your promotion!
Sent from my iPad using Tapatalk
- guillaume78150
- Staff Sergeant
- Posts: 467
- Joined: 08 Oct 2015, 06:07
- Location: North Burgundy
- Contact:
Re: CH Products on P3Dv4
Thanks everybody. Will do and let you know !
- Lewis - A2A
- A2A Lieutenant Colonel
- Posts: 33321
- Joined: 06 Nov 2004, 23:22
- Location: Norfolk UK
- Contact:
Re: CH Products on P3Dv4
P3dv4 has two input options under settings. Change this and things will probably work for you. A system or sim restart might be needed upon changing the setting.
Thanks,
Lewis
Thanks,
Lewis
A2A Facebook for news live to your social media newsfeed
A2A Youtube because a video can say a thousand screenshots,..
A2A Simulations Twitter for news live to your social media newsfeed
A2A Simulations Community Discord for voice/text chat
A2A Youtube because a video can say a thousand screenshots,..
A2A Simulations Twitter for news live to your social media newsfeed
A2A Simulations Community Discord for voice/text chat
-
- Senior Master Sergeant
- Posts: 2439
- Joined: 15 Mar 2016, 08:23
Re: CH Products on P3Dv4
Hi.
I dont have P3Dv4 i use FSXA and was told dont use the CH driver disc that came with them , but go direct to CH web site and download the drivers and control panel from there , and never had any issues with them , so check CH web site for any driver updates.
regards alan.
I dont have P3Dv4 i use FSXA and was told dont use the CH driver disc that came with them , but go direct to CH web site and download the drivers and control panel from there , and never had any issues with them , so check CH web site for any driver updates.
regards alan.
- guillaume78150
- Staff Sergeant
- Posts: 467
- Joined: 08 Oct 2015, 06:07
- Location: North Burgundy
- Contact:
Re: CH Products on P3Dv4
That was it, I switched to "Direct imput" and both pedals and sticks are recognized. The throttle wheel on the fighter stick is not recognized, I guess it's a matter of calibration.Lewis - A2A wrote:P3dv4 has two input options under settings. Change this and things will probably work for you. A system or sim restart might be needed upon changing the setting.
Thanks,
Lewis
Thanks anyway.
G.
Re: CH Products on P3Dv4
Hi Folks,
I’ve used a full CH HOTAS since game port days - I think I’m on my third setup - Bob Church (stickworks) who created the software and drivers left the company after many years - prior to Win10 - CH never invested in finding a replacement... Win10 had many reported issues with the Control Manager software/drivers and popular opinion suggests not installing any of it - simply using the native Windows drivers instead... That’s what I’ve been doing since I had some issues and it works fine - granted you lose the very powerful scripting language that came with Control Manager... Your mileage may vary...
Regards,
Scott
Sent from my iPad using Tapatalk
I’ve used a full CH HOTAS since game port days - I think I’m on my third setup - Bob Church (stickworks) who created the software and drivers left the company after many years - prior to Win10 - CH never invested in finding a replacement... Win10 had many reported issues with the Control Manager software/drivers and popular opinion suggests not installing any of it - simply using the native Windows drivers instead... That’s what I’ve been doing since I had some issues and it works fine - granted you lose the very powerful scripting language that came with Control Manager... Your mileage may vary...
Regards,
Scott
Sent from my iPad using Tapatalk
Re: CH Products on P3Dv4
I have a question for anyone in the know. In my p3Dv4 installation my input method is "Raw" which I would assume is default. I have three devices my G-940 stick,crosswind pedals and my Bodner controller (home made throttle & switch panel). They all work fine what would the the direct input option facilitate ? I guess if it ain't broke don't fix would apply but I am curious.
Who is online
Users browsing this forum: No registered users and 134 guests