I copied the A2A folder to the Prepar3dv5 Addons folder but when I try to start the plane the propeller seizes and I have no oil left and the hanger shows a fuel leak I cannot fix. I always check the hanger and gas and oil before I fly and all was fine. It’s happened 4 times in a row.
Windshield.dll was removed.
Any suggestions?
Mike
No oil in P3Dv5
- Nick - A2A
- A2A Captain
- Posts: 13805
- Joined: 06 Jun 2014, 13:06
- Location: UK
Re: No oil in P3Dv5
Hi Mike and welcome!
Does the Bonanza still work okay if you load it in P3Dv4?
Thanks,
Nick
Does the Bonanza still work okay if you load it in P3Dv4?
Thanks,
Nick
A2A Simulations Inc.
Re: No oil in P3Dv5
Thanks! You solved it.
The Bonanza was fine in v4 this morning. So when you asked me if it was working in v4, I went to check again when I noticed the “run as administrator” badge on v4, but not v5. I then ran v5 as administrator and now all is well. Your aircraft is perfect again!
I should have realized.
Thanks for the quick reply!
Mike
The Bonanza was fine in v4 this morning. So when you asked me if it was working in v4, I went to check again when I noticed the “run as administrator” badge on v4, but not v5. I then ran v5 as administrator and now all is well. Your aircraft is perfect again!
I should have realized.
Thanks for the quick reply!
Mike
- Nick - A2A
- A2A Captain
- Posts: 13805
- Joined: 06 Jun 2014, 13:06
- Location: UK
Re: No oil in P3Dv5
You're welcome Mike and good to hear you're now able to fly the Bonanza in v5. Although it's not 'officially supported' yet, if you notice any more issues, please let us know.
So far the known ones are:
Nick
So far the known ones are:
- Windshield.dll needs reworking as you know.
- Gauge glass reflections are a bit too prominent.
- Effects files such as as exterior lights need some attention.
- Glass has some transparency issues when "enhanced atmospherics (beta)" option is selected.
Nick
A2A Simulations Inc.
Re: No oil in P3Dv5
Hi,
Same issue here. P3Dv5 run as administrator...
Any idea?
EDIT: I was finally able to start by changing my model: the N288Q.
Then I tried again the "faulty" model (Jeppesen N1733G) which this time started normally. Curious...
Thank you and Regards,
Richard.
Same issue here. P3Dv5 run as administrator...
Any idea?
EDIT: I was finally able to start by changing my model: the N288Q.
Then I tried again the "faulty" model (Jeppesen N1733G) which this time started normally. Curious...
Thank you and Regards,
Richard.
Richard Portier
MAXIMUS VI FORMULA|Intel i7-4770K [email protected] x8|NVIDIA GeForce GTX 1080ti|M16GB|Windows10 Pro 64|Fsx Accel|P3Dv4.5HF2|Rex|Saitek Pro Flight Yoke/Rudder/Quadrant/Switch Panel|ThrustMaster Hotas Warthog|ActiveSky P3Dv4+Asca|Mce|All A2A
MAXIMUS VI FORMULA|Intel i7-4770K [email protected] x8|NVIDIA GeForce GTX 1080ti|M16GB|Windows10 Pro 64|Fsx Accel|P3Dv4.5HF2|Rex|Saitek Pro Flight Yoke/Rudder/Quadrant/Switch Panel|ThrustMaster Hotas Warthog|ActiveSky P3Dv4+Asca|Mce|All A2A
-
- Airman
- Posts: 21
- Joined: 12 Dec 2014, 09:36
Re: No oil in P3Dv5
Same for me. I had ti change my default model to make disappear the fuel leak...
Igor
Igor
-
- Airman
- Posts: 21
- Joined: 12 Dec 2014, 09:36
Re: No oil in P3Dv5
Anyway I have other problems.
When I start avionic I see fig 1. When I activate instruments illumination I see fig.2.
Igor
fig1: https://drive.google.com/open?id=1DaY0E ... AHOjfBIjKY
fig2: https://drive.google.com/open?id=143FEF ... WOOEjixb_2
When I start avionic I see fig 1. When I activate instruments illumination I see fig.2.
Igor
fig1: https://drive.google.com/open?id=1DaY0E ... AHOjfBIjKY
fig2: https://drive.google.com/open?id=143FEF ... WOOEjixb_2
- Nick - A2A
- A2A Captain
- Posts: 13805
- Joined: 06 Jun 2014, 13:06
- Location: UK
Re: No oil in P3Dv5
Hello Igor,
If you're seeing issues in P3Dv5, please can you start a new thread and let us know exactly which method you've used to move your A2A add-ons from P3Dv4 to v5. This includes details of any third party repaints etc. which you have installed and any other add-ons in use in the sim.
Thanks,
Nick
If you're seeing issues in P3Dv5, please can you start a new thread and let us know exactly which method you've used to move your A2A add-ons from P3Dv4 to v5. This includes details of any third party repaints etc. which you have installed and any other add-ons in use in the sim.
Thanks,
Nick
A2A Simulations Inc.
Who is online
Users browsing this forum: No registered users and 21 guests