Hi DC3,
It looks like your texture res setting reset itself back to 1024, which it will do any time you alter any of the FSX graphical settings - even changing the traffic percentage will change it back to 1024. If you go back into the FSX.cfg and change it, then avoid changing any graphics settings in FSX it should be good to go.
[/quote]
Hi Molly,
You were absolutely correct. See the new pictures! Much better.
For those experiencing blurry textures
Re: For those experiencing blurry textures
I too suffered from the blurry textures initially. With Nicks help I increased my global textures to 4096 and then switched off the anti aliasing setting. I did get a big improvement with these setting but as I fly with the zoom setting out a little i did notice some blurring still, but at an acceptable level. The huge difference for me was the improvement of my scenery textures. All of a sudden everything was crisp and clear and decidedly better than before.
I will stick with these settings and would like to thank Nick for the patience shown and help given. It has improved my enjoyment of simming and the Bonanza will soon become one of my favourites to take up.
Thanks to all at A2A and thanks again Nick.
Mick
I will stick with these settings and would like to thank Nick for the patience shown and help given. It has improved my enjoyment of simming and the Bonanza will soon become one of my favourites to take up.
Thanks to all at A2A and thanks again Nick.
Mick
Re: For those experiencing blurry textures
I put this together to help those who are still having problems with this.
-
- Airman Basic
- Posts: 3
- Joined: 17 Sep 2018, 10:40
Re: For those experiencing blurry textures
Changed the number in .cfg file to 4096 and saved but still getting blurries. Any suggestions? Or should just hold off till patch comes out?
Re: For those experiencing blurry textures
Did you change anything in your options after you did it? Is it FSX or P3D?Max Morton wrote:Changed the number in .cfg file to 4096 and saved but still getting blurries. Any suggestions? Or should just hold off till patch comes out?
Re: For those experiencing blurry textures
Just wanted to add my name to the list of people who find the bonanza gauges had to read. This is the first A2A aircraft I've experienced this in in both my FSX and now P3D format. Hope there wil be a fix for us. Thanks for the new plane!
-
- Airman
- Posts: 26
- Joined: 05 Oct 2007, 16:01
- Location: New Zealand
Re: For those experiencing blurry textures
How much longer before this gets sorted?
Given the number of people with blurry textures it seems odd this wasn't picked up by the beta testers.
A great product but no good when you can't read the instruments.
Given the number of people with blurry textures it seems odd this wasn't picked up by the beta testers.
A great product but no good when you can't read the instruments.
Re: For those experiencing blurry textures
I have the same blurry problem with the V-tail. I am running 2560x1440x32 on monitor settings for all planes and other uses on the computer. I also have 5 A2A accusim planes and their graphics are fine.
I also run FTX/ORBX HD graphics throughout the USA and South America. With HD Scenery and HD aircraft, settings need to be detuned or the infamous OOM will occur. This is a MS FSX bug.
There are lots of articles on the internet about this.
That said, I am not turning all graphic settings to MAX. As one poster in another forum put it, "do you want to have your graphics at max with unlimited FPS or do you want to fly." I want to fly. So, A2A, please come up with a fix.
Last comment and wish list. I just bought the Carenado D-18, and what a pile of bugs (I almost said something else). I was so used to Milt Shupe's free D-18, I thought the VC would be better from Carenado, but I was wrong. Very poor flight model. As one use said, "its like landing your car." I own 20 Careenado/Alabeo planes and I think the D-18 will be the last. I don't like bad mouthing another publisher, but I think they are pushing out new planes too fast, and the quality suffers.
In that regard, A2A plane development is sure slow, but it sure it good.
I still like you B-17 best.
Best regards,
-Jim
So how about a D-18s next?
I also run FTX/ORBX HD graphics throughout the USA and South America. With HD Scenery and HD aircraft, settings need to be detuned or the infamous OOM will occur. This is a MS FSX bug.
There are lots of articles on the internet about this.
That said, I am not turning all graphic settings to MAX. As one poster in another forum put it, "do you want to have your graphics at max with unlimited FPS or do you want to fly." I want to fly. So, A2A, please come up with a fix.
Last comment and wish list. I just bought the Carenado D-18, and what a pile of bugs (I almost said something else). I was so used to Milt Shupe's free D-18, I thought the VC would be better from Carenado, but I was wrong. Very poor flight model. As one use said, "its like landing your car." I own 20 Careenado/Alabeo planes and I think the D-18 will be the last. I don't like bad mouthing another publisher, but I think they are pushing out new planes too fast, and the quality suffers.
In that regard, A2A plane development is sure slow, but it sure it good.
I still like you B-17 best.
Best regards,
-Jim
So how about a D-18s next?
-
- Airman Basic
- Posts: 3
- Joined: 17 Sep 2018, 10:40
Re: For those experiencing blurry textures
Neon wrote:Did you change anything in your options after you did it? Is it FSX or P3D?Max Morton wrote:Changed the number in .cfg file to 4096 and saved but still getting blurries. Any suggestions? Or should just hold off till patch comes out?
Yea it’s FSX and no I didn’t changed anything. The 4096 stays saved in the .cfg every time I open it.
Re: For those experiencing blurry textures
Here as well, FSX-A with blurry texture, despite the texture setting to 4096.
Regards,
Seawing
Regards,
Seawing
Re: For those experiencing blurry textures
Woohoo! I can see again! Thanks for the mipmap-less textures, A2A. My eyesight is bad enough, this is a miracle. Yessssssss! Thanks!
Re: For those experiencing blurry textures
Watch the video, or read the first part of this thread. Both tell you how to fix it, it's not something that
needs to be patched; it's a fix you need to make. Very easy to do.
needs to be patched; it's a fix you need to make. Very easy to do.
-
- Senior Master Sergeant
- Posts: 2286
- Joined: 05 Nov 2013, 10:48
- Location: Oksboel, Denmark
Re: For those experiencing blurry textures
lots of people have said "the 4096 fix" does not work for them, myself included. the patch sorted the problem for me.
Kind Regards
Tomas
Sim: FSX SE
Accu-Sim aircraft in my hangar:
C172, C182, P51 Civ, P51 Mil, B17, Spitfire, P47, B377 COTS,
J3 Cub, T6, Connie, P-40, V35B
A2A Accu-Sim Avro Lancaster Loading:............0.000003% complete, please wait.
Tomas
Sim: FSX SE
Accu-Sim aircraft in my hangar:
C172, C182, P51 Civ, P51 Mil, B17, Spitfire, P47, B377 COTS,
J3 Cub, T6, Connie, P-40, V35B
A2A Accu-Sim Avro Lancaster Loading:............0.000003% complete, please wait.
Re: For those experiencing blurry textures
Thanks for telling me what I need to do, but as it turns out I didn't need to do anything because A2A fixed my problem with the patches.Neon wrote:Watch the video, or read the first part of this thread. Both tell you how to fix it, it's not something that
needs to be patched; it's a fix you need to make. Very easy to do.
Not everybody wants to or like me is comfortable messing around with things, especially when I don't know what I am doing. I have FSX running great and don't want to chance screwing something up. I have very limited time and as such, I like to fly not troubleshoot things.
Re: For those experiencing blurry textures
"TEXTURE_MAX_LOAD=4096" worked on my system.
FSX:Boxed + Acceleration
I7-4770K
GTX760
16GB Ram
But I lost 20fps because of the increase in texture sizes (I assume). Interestingly enough, I realized that framrate issues were causing my CumulusX thermal/updraft module to behave badly.
Going to try the Mipmap fix now.
Also, thanks for having the patience of supporting my arguably ancient simulator choice. I promise I'll update at some point
EDIT: Substantially better! I'm keeping it...
FSX:Boxed + Acceleration
I7-4770K
GTX760
16GB Ram
But I lost 20fps because of the increase in texture sizes (I assume). Interestingly enough, I realized that framrate issues were causing my CumulusX thermal/updraft module to behave badly.
Going to try the Mipmap fix now.
Also, thanks for having the patience of supporting my arguably ancient simulator choice. I promise I'll update at some point
EDIT: Substantially better! I'm keeping it...
Who is online
Users browsing this forum: No registered users and 25 guests