Garmin 750 and HSI
When a flight plan is inputted into the Garmin 750 and the Map display is opened, selecting the CDI option to GPS, the HSI needle will center, but the course pointer does not point to the correct course.
You can rotate the HSI Course Needle to any heading desired and while turning, the CDI center bar will stay aligned. On all other aircraft, once selecting GPS on the Map Display Page of the Garmin 750, the HSI Course Needle will center and the point needle turns to the correct flight plan course.
Thanks for reviewing,
Asticou
Garmin 750 and HSI
Re: Garmin 750 and HSI
I've got the RXP GTN 750 and 650 in my A2A Bonanza, and I have the 750 set up as shown on page 5 of the Reality GTN User's Manual. Also, I have both units set up with both arrows going between GPS and SIM as shown on page 11 of the manual.
Hope that helps.
Seeya
ATB
Hope that helps.
Seeya
ATB
- Nick - A2A
- A2A Captain
- Posts: 13777
- Joined: 06 Jun 2014, 13:06
- Location: UK
Re: Garmin 750 and HSI
Hello Asticou,
Yes, in both the RealityXP and FLight1 GTNs, the HSI behaviour can be configured in the GPS settings app for each product. Extracts from their respective *.ini files are shown below.
RXP
F1
Thanks,
Nick
Yes, in both the RealityXP and FLight1 GTNs, the HSI behaviour can be configured in the GPS settings app for each product. Extracts from their respective *.ini files are shown below.
RXP
Code: Select all
; connects GPS to HSI course motor if true.
LinkCrs = true
Code: Select all
Auto CRS=1
Nick
A2A Simulations Inc.
Re: Garmin 750 and HSI
Thanks for the info, will try on my next flight.
Asticou
Asticou
Re: Garmin 750 and HSI
Of course, for Full Realism™, you'd be manually rotating the course indicator, as it would not be servo'ed in real installation.
-Esa
-Esa
Who is online
Users browsing this forum: No registered users and 10 guests