After finishing a normal flight with the T6 yesterday I shut down P3D V4.5. Today I wanted to do another flight, but the T6 loaded into a black screen, which stayed on forever. I get into the cockpit if I load a default plane first, but the P3D freezes, no more actions possible.
I tried a new P3D.cfg, uninstalling and reinstalling the T6, but nothing helps. I changed the GPS from GTN 650 to default and back, no effect. I also reinstalled SimConnect, no change.
All other A2A airplanes (Bonanza, C-182, C-172, Cherokee, Spitfire) work fine.
Any help would be appreciated.
Thanks
Unable to load T6
- Nick - A2A
- A2A Captain
- Posts: 13811
- Joined: 06 Jun 2014, 13:06
- Location: UK
Re: Unable to load T6
Hello Gunter,
Might be worth deleting your shader cache for P3D to allow the sim to generate new ones. To do this, you'll need to delete the following folder:
C:\Users\[UserName]\AppData\Local\Lockheed Martin\Prepar3D v4\Shaders
If this doesn't help, try backing up and then deleting the "C:\Users\[UserName]\Documents\A2A\FSX\T6" directory.
Cheers,
Nick
Might be worth deleting your shader cache for P3D to allow the sim to generate new ones. To do this, you'll need to delete the following folder:
C:\Users\[UserName]\AppData\Local\Lockheed Martin\Prepar3D v4\Shaders
If this doesn't help, try backing up and then deleting the "C:\Users\[UserName]\Documents\A2A\FSX\T6" directory.
Cheers,
Nick
A2A Simulations Inc.
Re: Unable to load T6
Hello Nick,
thanks for your fast reply!
Deleting and rebuilding of the Shaders did not help, neither the deletion of the ...FSX/T6 directory.
After loading the T6 the screen stays black (full screen or windowed mode).
Any other suggestions?
Cheers
Gunter
thanks for your fast reply!
Deleting and rebuilding of the Shaders did not help, neither the deletion of the ...FSX/T6 directory.
After loading the T6 the screen stays black (full screen or windowed mode).
Any other suggestions?
Cheers
Gunter
-
- Airman Basic
- Posts: 3
- Joined: 02 Mar 2020, 13:03
Re: Unable to load T6
Hey guys! Just wanted to say that I'm experiencing the same problem. It flew just fine last night. This morning it won't load past a black screen, then P3D freezes and crashes to desktop. I've tried the steps above but no luck yet. I've disabled all addons and deleted/reinstalled the T-6 and still the same result.
Thank you for your help
Thank you for your help
- Ron Attwood
- Chief Master Sergeant
- Posts: 3255
- Joined: 30 Nov 2010, 10:07
- Location: Chelmsford, Essex, UK
Re: Unable to load T6
I'm going to take a wild stab at an aircraft.cfg cockup. I've been in that situation before (not necessarily the T-6) and it turned out a misplaced . or _ or maybe even a :
Sorry, that's all I got.
EDIT: Just been for a pee and had a thought. Is it just one T-6 or all of them?
Sorry, that's all I got.
EDIT: Just been for a pee and had a thought. Is it just one T-6 or all of them?
Eva Vlaardingerbroek, an inspiratiom.
Re: Unable to load T6
Hello Ron,
it's all of them.
I will try another uninstall and dig as deep as I can in all the folders where there may be something left and try again...
it's all of them.
I will try another uninstall and dig as deep as I can in all the folders where there may be something left and try again...
- Ron Attwood
- Chief Master Sergeant
- Posts: 3255
- Joined: 30 Nov 2010, 10:07
- Location: Chelmsford, Essex, UK
Re: Unable to load T6
Mmm, sounds like a reinstall of Windows to me.
Eva Vlaardingerbroek, an inspiratiom.
- Nick - A2A
- A2A Captain
- Posts: 13811
- Joined: 06 Jun 2014, 13:06
- Location: UK
Re: Unable to load T6
Hi Gunter,
Thanks,
Nick
Thanks for trying that. It might be worth going a step further and deleting all of P3Dv4's generated files. This short vid explains the procedure you'd need to follow.
Hi Casey - might be worth you trying the same thing.casey.cole wrote: ↑02 Mar 2020, 13:26 Hey guys! Just wanted to say that I'm experiencing the same problem. It flew just fine last night. This morning it won't load past a black screen, then P3D freezes and crashes to desktop. I've tried the steps above but no luck yet. I've disabled all addons and deleted/reinstalled the T-6 and still the same result.
Thanks,
Nick
A2A Simulations Inc.
-
- Airman Basic
- Posts: 3
- Joined: 02 Mar 2020, 13:03
Re: Unable to load T6
Success! I followed the steps in the video and then had to reinstall the Texan to get it to show up in my aircraft list, but we're up and running now. Thanks again for your help! Hopefully this fixes the issues for others.Nick - A2A wrote: ↑02 Mar 2020, 18:20 Hi Gunter,
Thanks for trying that. It might be worth going a step further and deleting all of P3Dv4's generated files. This short vid explains the procedure you'd need to follow.
- Nick - A2A
- A2A Captain
- Posts: 13811
- Joined: 06 Jun 2014, 13:06
- Location: UK
Re: Unable to load T6
Thanks for the update Casey - good to hear the issue is resolved on your system and welcome to the A2A forums.
Cheers,
Nick
Cheers,
Nick
A2A Simulations Inc.
-
- Airman Basic
- Posts: 3
- Joined: 02 Mar 2020, 13:03
Re: Unable to load T6
Hey Nick, I did some more digging and found the problem I was having comes from the A2A_Accusim.dll file in the A2A gauges folder. Replacing that single file with an older copy fixed the problem for me. Not sure if that helps you on the bug fixing side, but that's what I was able to figure out.
The steps I followed: Installed the Texan to a new directory, took the A2A_Accusim.dll file from the gauges folder of the new install, placed that file into my original A2A gauges folder, overwriting the bad copy. Then I reinstalled the Texan into my original directory.
Thanks for the warm welcome
The steps I followed: Installed the Texan to a new directory, took the A2A_Accusim.dll file from the gauges folder of the new install, placed that file into my original A2A gauges folder, overwriting the bad copy. Then I reinstalled the Texan into my original directory.
Thanks for the warm welcome
- curtis72561
- Staff Sergeant
- Posts: 374
- Joined: 20 Aug 2012, 19:52
- Location: Sugarland, Texas - KSGR
Re: Unable to load T6
I checked and the same issue here. I'm following the video now but would like to know what caused this to more than one person.
Beeachcraft V35 Bonanza, Boeing B-17 Flying Fortress, Cessna C-172 Skyhawk, Cessna C-182 Skylane, Curtis P-40, North American P-51D Mustang Civilian
North American AT6 Texan, Piper PA-28 Cherokee, Piper PA-24 Comanche, Piper J-3 Cub, Supermarine Spitfire
North American AT6 Texan, Piper PA-28 Cherokee, Piper PA-24 Comanche, Piper J-3 Cub, Supermarine Spitfire
- curtis72561
- Staff Sergeant
- Posts: 374
- Joined: 20 Aug 2012, 19:52
- Location: Sugarland, Texas - KSGR
Re: Unable to load T6
Question. Do I need to re-install all A2A aircraft? They are in the folder that was removed and don't show up.curtis72561 wrote: ↑02 Mar 2020, 21:22 I checked and the same issue here. I'm following the video now but would like to know what caused this to more than one person.
Beeachcraft V35 Bonanza, Boeing B-17 Flying Fortress, Cessna C-172 Skyhawk, Cessna C-182 Skylane, Curtis P-40, North American P-51D Mustang Civilian
North American AT6 Texan, Piper PA-28 Cherokee, Piper PA-24 Comanche, Piper J-3 Cub, Supermarine Spitfire
North American AT6 Texan, Piper PA-28 Cherokee, Piper PA-24 Comanche, Piper J-3 Cub, Supermarine Spitfire
- Nick - A2A
- A2A Captain
- Posts: 13811
- Joined: 06 Jun 2014, 13:06
- Location: UK
Re: Unable to load T6
Curtis,curtis72561 wrote: ↑02 Mar 2020, 21:28 Question. Do I need to re-install all A2A aircraft? They are in the folder that was removed and don't show up.
Reinstalling just one should do the trick. We'll look into the issue with the A2A_Accusim.dll chaps. Please can you let us know the file version number of the copy that is present when this issue occurs. You can see the version number if you hover the mouse cursor over the file, or if you right click and view the file's properties.
Thanks,
Nick
A2A Simulations Inc.
Who is online
Users browsing this forum: No registered users and 27 guests