T-6 Ammeter
T-6 Ammeter
Hi, during flight my ammeter indicates zero, anyway battery and electrical components works for hours i tested yesterday.....so ther is a problem or not in your opinion ?
- Nick - A2A
- A2A Captain
- Posts: 13807
- Joined: 06 Jun 2014, 13:06
- Location: UK
Re: T-6 Ammeter
Hi Yarrik,
If the generator is switched on, it should cut in at about 1,250 RPM (and out at 1,000 RPM), so if it's reading zero in flight it indicates a problem.
Have you checked the generator in the maintenance hangar? Also, do you have FSUIPC installed, and if so, is it set to modify battery behaviour?
Thanks,
Nick
If the generator is switched on, it should cut in at about 1,250 RPM (and out at 1,000 RPM), so if it's reading zero in flight it indicates a problem.
Have you checked the generator in the maintenance hangar? Also, do you have FSUIPC installed, and if so, is it set to modify battery behaviour?
Thanks,
Nick
A2A Simulations Inc.
Re: T-6 Ammeter
Gnerator is on and ok in the hangar, sometimes ammeter goes on and sometimes off, i use fsuipc but i dont want that it interfer with A2A logic of sim, how can i deactivate it ?
- Nick - A2A
- A2A Captain
- Posts: 13807
- Joined: 06 Jun 2014, 13:06
- Location: UK
Re: T-6 Ammeter
Okay, thanks for the info. Please can you check that the "extend battery life" checkbox is not ticked in the miscellaneous settings page of FSUIPC.
Nick
Nick
A2A Simulations Inc.
Who is online
Users browsing this forum: No registered users and 24 guests