GNS 530 NO COM1 or NAV1
GNS 530 NO COM1 or NAV1
I read a similar topic but did help....I with RXP GNS 530 the com1 or nav1 dose not work...I have to switch radios to Com2....anything on this yet?
Re: GNS 530 NO COM1 or NAV1
Two things were required to get mine working.
1) Edit the rxpgns.ini file under the 530 heading, changing Radios=2 to Radios=1
2) Configure the plane to use the stock King radios for one session. Turn on the battery, avionics master and fire up nav/com 1. Exit, reconfigure for the 530 and fly. (Thanks to Ryan B. for that one!)
Hope that helps,
Scott
1) Edit the rxpgns.ini file under the 530 heading, changing Radios=2 to Radios=1
2) Configure the plane to use the stock King radios for one session. Turn on the battery, avionics master and fire up nav/com 1. Exit, reconfigure for the 530 and fly. (Thanks to Ryan B. for that one!)
Hope that helps,
Scott
Re: GNS 530 NO COM1 or NAV1
well I have already done #1, will go home tonight and try #2....Thanks for the tip ...will let ya know later tonight if that worked
- Lewis - A2A
- A2A Lieutenant Colonel
- Posts: 33284
- Joined: 06 Nov 2004, 23:22
- Location: Norfolk UK
- Contact:
Re: GNS 530 NO COM1 or NAV1
Hello,
Try switching to the default panel turn on the radios and then switch back using the shift + 3 panel. You should only have to do this once.
thanks,
Lewis
Try switching to the default panel turn on the radios and then switch back using the shift + 3 panel. You should only have to do this once.
thanks,
Lewis
A2A Facebook for news live to your social media newsfeed
A2A Youtube because a video can say a thousand screenshots,..
A2A Simulations Twitter for news live to your social media newsfeed
A2A Simulations Community Discord for voice/text chat
A2A Youtube because a video can say a thousand screenshots,..
A2A Simulations Twitter for news live to your social media newsfeed
A2A Simulations Community Discord for voice/text chat
Re: GNS 530 NO COM1 or NAV1
There is a small config program for the rxp:s where you can choose whether you want it to use com1 or 2. Had the same problem. Think it was in the rxp folder i found it.
Re: GNS 530 NO COM1 or NAV1
switching to the stock radios then back to the 530 worked great...thanks for the quick response guys
Re: GNS 530 NO COM1 or NAV1
Don't think you have to switch to stock stack, just hit SHFT 6 and turn COM1 on in the pop up window.....worked for me anyways.
Steve
Steve
Who is online
Users browsing this forum: No registered users and 9 guests