Hello,
I'm having a problem with the F1 GTN 750 and 650 when used in the 182, Bonanza and Comanche. I run the a2a vehicle config utility to run the F1 GTN products. When I start P3d v4 and load the aircraft, sometimes the GTNs will work. Most of the times, the GNT screens are black. If they do choose to run, if the avionics switch is ever turned off, the GTNs will never turn on again. I do use my own custom configurations and well have messed things up. I also use the GNS530/430 from F1, after modifying the RXP panel files. The GNS work with no troubles at all. I very much want to be able to assign various configurations to individual aircraft by using the panel.xxxx method in the aircraft config files.
Any Idea whats going on with the GTNs and the avionics power switch?
F1 750/650 with the C182
-
- Airman First Class
- Posts: 81
- Joined: 28 Sep 2015, 17:20
- Location: Oro Valley AZ
Re: F1 750/650 with the C182
Make sure that you have the lastet version of Flight1‘s GTN installed. I had similar problems before and installing the latest version solved them.
Felix
Who is online
Users browsing this forum: No registered users and 25 guests