I've gotten the RXP GNS 430 integrated into my panel. It looks great!
The one thing I can't seem to fix is that the GPS refuses to drive the CDI. I can't get either needle to come alive, and both flags are up. The one exception is that during GPS bootup the VOR needle flicks for a moment and then goes dead again.
Any ideas? I've been stuck on this for hours.
RXP GNS 430 CDI Integration
Re: RXP GNS 430 CDI Integration
Given how the needle flicks a bit at startup, it makes me wonder if the old KX155 gauge is still there but invisible, and that its fighting the GNS430 for control of the CDI.
- Nick - A2A
- A2A Captain
- Posts: 13805
- Joined: 06 Jun 2014, 13:06
- Location: UK
Re: RXP GNS 430 CDI Integration
Hi zaruthoj,
Is this the new RXP GNS 430 v2 or the original version released several years ago? If it's the former, if you open the RXP configuration manager and select the "connect GPS to VOR indicator" setting, the GNS 430 should drive the CDI and glideslope needle.
You'll need to make sure the CDI mode is set to GPS too, via the button at the bottom left of the GNS 430 bezel.
Thanks,
Nick
Is this the new RXP GNS 430 v2 or the original version released several years ago? If it's the former, if you open the RXP configuration manager and select the "connect GPS to VOR indicator" setting, the GNS 430 should drive the CDI and glideslope needle.
You'll need to make sure the CDI mode is set to GPS too, via the button at the bottom left of the GNS 430 bezel.
Thanks,
Nick
Re: RXP GNS 430 CDI Integration
Do you have this setup working? If so, could you post your panel.cfg? I'm somewhat suspicious of mine, especially since it contains this line:
[Vcockpit00]
...
gauge14=A2A_PA28!GPS_MINDSTAR_430, 1, 1, 1, 1
That seems obviously wrong, but I'm not sure what should go there.
[Vcockpit00]
...
gauge14=A2A_PA28!GPS_MINDSTAR_430, 1, 1, 1, 1
That seems obviously wrong, but I'm not sure what should go there.
- Nick - A2A
- A2A Captain
- Posts: 13805
- Joined: 06 Jun 2014, 13:06
- Location: UK
Re: RXP GNS 430 CDI Integration
I did have the CDI working with the GNS 530 in the Cherokee, but I'm away from home for a few days without access to my flight sim PC.
If you don't manage to resolve the issue in the meantime (the RXP forum on Avsim is a good source of info), I should be able to provide a bit more useful info when I'm back home.
Nick
If you don't manage to resolve the issue in the meantime (the RXP forum on Avsim is a good source of info), I should be able to provide a bit more useful info when I'm back home.
Nick
Re: RXP GNS 430 CDI Integration
Still no resolution on this.
Are you back in a situation where you can share your panel.cfg?
Are you back in a situation where you can share your panel.cfg?
- Nick - A2A
- A2A Captain
- Posts: 13805
- Joined: 06 Jun 2014, 13:06
- Location: UK
Re: RXP GNS 430 CDI Integration
Hi zaruthoj,
I made it back home this evening, so I'll get back to you tomorrow with some more information.
Nick
I made it back home this evening, so I'll get back to you tomorrow with some more information.
Nick
- Nick - A2A
- A2A Captain
- Posts: 13805
- Joined: 06 Jun 2014, 13:06
- Location: UK
Re: RXP GNS 430 CDI Integration
I don't own a copy of the RXP GNS 430 zaruthoj, but here's a copy of my .ini file. I copied the settings I use from the 530 section to the 430 section, so hopefully it will work for you too: https://www.dropbox.com/s/vbwik8hakkn2w ... S.ini?dl=0.
Regards,
Nick
Regards,
Nick
Re: RXP GNS 430 CDI Integration
Thanks for posting your ini file!
I copied the 430 portion of it, but still no luck.
What did produce results was making the following change to my panel.cfg under [Vcockpit00]:
After I made that switch I get CDI and glideslope when the CDI is in GPS mode! This is obviously a big step forward
The one problem left is that I still get no CDI indication when the CDI is in VLOC mode (obviously with a nearby VOR tuned). Does this work on your setup?
I copied the 430 portion of it, but still no luck.
What did produce results was making the following change to my panel.cfg under [Vcockpit00]:
Code: Select all
//gauge14=A2A_PA28!GPS_MINDSTAR_430, 1, 1, 1, 1
gauge14=A2A_PA28!GPS_RXP_430, 1, 1, 1, 1
The one problem left is that I still get no CDI indication when the CDI is in VLOC mode (obviously with a nearby VOR tuned). Does this work on your setup?
Who is online
Users browsing this forum: No registered users and 33 guests