Hi all,
i have a problem with the variable "L: Nav1Ident", it always returns zero, whatever the position of the pull ident. Am I wrong something?
thank you
LVars
- Nick - A2A
- A2A Captain
- Posts: 13774
- Joined: 06 Jun 2014, 13:06
- Location: UK
Re: LVars
Hi,
We checked this one with the guys, and apparently the L:Var for the NAV1 ident switch in the 172 is "L:Nav1PullIdent". Could you give this one a try instead?
Thanks,
Nick
We checked this one with the guys, and apparently the L:Var for the NAV1 ident switch in the 172 is "L:Nav1PullIdent". Could you give this one a try instead?
Thanks,
Nick
A2A Simulations Inc.
- joetemerario
- Airman
- Posts: 12
- Joined: 25 Apr 2020, 03:48
Re: LVars
Thanks very much Nick, now it's ok.
- Nick - A2A
- A2A Captain
- Posts: 13774
- Joined: 06 Jun 2014, 13:06
- Location: UK
- joetemerario
- Airman
- Posts: 12
- Joined: 25 Apr 2020, 03:48
Re: LVars
Hi Nick,
can you help me with others Lvars?
I have mapped all GNS400 button and function and all works fine, but for VC Knob animation you in yours pdf file for C172 Lvars List, say this:
"......GPS inner knob push - toggle (L:GpsInnerKnobPush,bool) for VC animation, use (>K:GPS_CURSOR_BUTTON) event for GPS function....."
you say for the three vars (GpsInnerKnobPush, GpsOuterKnob, GpsInnerKnob), but no animation (instead for the others knob...example: ADF, COM1, COM2 ecc.. animation works fine).
Finally, I can't find a variable for the "Annunciator panel test switch".
thanks in advance for your help
can you help me with others Lvars?
I have mapped all GNS400 button and function and all works fine, but for VC Knob animation you in yours pdf file for C172 Lvars List, say this:
"......GPS inner knob push - toggle (L:GpsInnerKnobPush,bool) for VC animation, use (>K:GPS_CURSOR_BUTTON) event for GPS function....."
you say for the three vars (GpsInnerKnobPush, GpsOuterKnob, GpsInnerKnob), but no animation (instead for the others knob...example: ADF, COM1, COM2 ecc.. animation works fine).
Finally, I can't find a variable for the "Annunciator panel test switch".
thanks in advance for your help
Re: LVars
Nick,
what with the advent of the new Honeycomb sets (Alpha Yoke, Bravo TQ), and the former Saitek/now Logitech panels still very famous, and both sets being (IMHO) very dependent on LVars: Could you publish lists of LVars for each aircraft, please. That way, we can ‚program‘ the sets so that they can work with every function of the aircraft. Mentioned here is the gear lever; I have problems programming the flaps lever of the Bonanza 35B in my Honeycomb Bravo. It only seems to know ‚fully down‘ or ‚fully up‘ nothing in between. I tried all the parametres like FLAPS_INCR and FLAPS_DECR but they, too, only move the flaps fully up or down.
Now I suspect that there must be another way to handle this... LVars come to mind. I tried to find them in the P3D v5 SDK, to no avail. Only today I read here that the LVars are aircraft dependent ... and thus the domain of the aircraft publisher.
I am very much looking forward to finding a link here, soon!
Volker
what with the advent of the new Honeycomb sets (Alpha Yoke, Bravo TQ), and the former Saitek/now Logitech panels still very famous, and both sets being (IMHO) very dependent on LVars: Could you publish lists of LVars for each aircraft, please. That way, we can ‚program‘ the sets so that they can work with every function of the aircraft. Mentioned here is the gear lever; I have problems programming the flaps lever of the Bonanza 35B in my Honeycomb Bravo. It only seems to know ‚fully down‘ or ‚fully up‘ nothing in between. I tried all the parametres like FLAPS_INCR and FLAPS_DECR but they, too, only move the flaps fully up or down.
Now I suspect that there must be another way to handle this... LVars come to mind. I tried to find them in the P3D v5 SDK, to no avail. Only today I read here that the LVars are aircraft dependent ... and thus the domain of the aircraft publisher.
I am very much looking forward to finding a link here, soon!
Volker
-
- Senior Master Sergeant
- Posts: 2286
- Joined: 05 Nov 2013, 10:48
- Location: Oksboel, Denmark
Re: LVars
The LVars could be included in the manual
Kind Regards
Tomas
Sim: FSX SE
Accu-Sim aircraft in my hangar:
C172, C182, P51 Civ, P51 Mil, B17, Spitfire, P47, B377 COTS,
J3 Cub, T6, Connie, P-40, V35B
A2A Accu-Sim Avro Lancaster Loading:............0.000003% complete, please wait.
Tomas
Sim: FSX SE
Accu-Sim aircraft in my hangar:
C172, C182, P51 Civ, P51 Mil, B17, Spitfire, P47, B377 COTS,
J3 Cub, T6, Connie, P-40, V35B
A2A Accu-Sim Avro Lancaster Loading:............0.000003% complete, please wait.
- Nick - A2A
- A2A Captain
- Posts: 13774
- Joined: 06 Jun 2014, 13:06
- Location: UK
Re: LVars
Hi Volker,
The L:Var listing for the 172 can be found in this post, which itself is linked in the FAQ thread. Most of the other Accu-Sim planes have similar documents which we've published on the forums.
Tomas's idea of including the L:Var list in the manual (or at least as an appendix to it) isn't a bad one for future projects.
Thanks,
Nick
A2A Simulations Inc.
-
- Senior Master Sergeant
- Posts: 2286
- Joined: 05 Nov 2013, 10:48
- Location: Oksboel, Denmark
Re: LVars
I have a lot of good ideas....now....lets talk about that Accu-Sim Lancaster have you seen Lewis lately??
Kind Regards
Tomas
Sim: FSX SE
Accu-Sim aircraft in my hangar:
C172, C182, P51 Civ, P51 Mil, B17, Spitfire, P47, B377 COTS,
J3 Cub, T6, Connie, P-40, V35B
A2A Accu-Sim Avro Lancaster Loading:............0.000003% complete, please wait.
Tomas
Sim: FSX SE
Accu-Sim aircraft in my hangar:
C172, C182, P51 Civ, P51 Mil, B17, Spitfire, P47, B377 COTS,
J3 Cub, T6, Connie, P-40, V35B
A2A Accu-Sim Avro Lancaster Loading:............0.000003% complete, please wait.
- Nick - A2A
- A2A Captain
- Posts: 13774
- Joined: 06 Jun 2014, 13:06
- Location: UK
Re: LVars
A2A Simulations Inc.
-
- Senior Master Sergeant
- Posts: 2286
- Joined: 05 Nov 2013, 10:48
- Location: Oksboel, Denmark
Re: LVars
throw in the Merlin from the P-51 and I'm in
joetemerario: I'm sorry for the hijack
joetemerario: I'm sorry for the hijack
Kind Regards
Tomas
Sim: FSX SE
Accu-Sim aircraft in my hangar:
C172, C182, P51 Civ, P51 Mil, B17, Spitfire, P47, B377 COTS,
J3 Cub, T6, Connie, P-40, V35B
A2A Accu-Sim Avro Lancaster Loading:............0.000003% complete, please wait.
Tomas
Sim: FSX SE
Accu-Sim aircraft in my hangar:
C172, C182, P51 Civ, P51 Mil, B17, Spitfire, P47, B377 COTS,
J3 Cub, T6, Connie, P-40, V35B
A2A Accu-Sim Avro Lancaster Loading:............0.000003% complete, please wait.
Re: LVars
Nick,
thanks for the list of LVars for the C172.
Can you point me to the rest of the lists, please? I have the Bonanza 35B, Comanche 250, Spitfire Mk II, (Bf 109E).
I have been trying to find other lists in the fora here, found only C172, Spit, Comanche, after much research.
Tx in advance!
Volker
thanks for the list of LVars for the C172.
Can you point me to the rest of the lists, please? I have the Bonanza 35B, Comanche 250, Spitfire Mk II, (Bf 109E).
I have been trying to find other lists in the fora here, found only C172, Spit, Comanche, after much research.
Tx in advance!
Volker
Who is online
Users browsing this forum: No registered users and 10 guests