Bank Angle Indicator Not Moving

Post any technical issues here. This forum gets priority from our staff.
new reply
Harron
Airman Basic
Posts: 3
Joined: 16 May 2020

Bank Angle Indicator Not Moving

Post Harron »

In P3D v5 HF1 using the latest installer for C172, the bank angle indicator is immobile at all times.
Any ideas?

User avatar
Nick - A2A
A2A Captain
Posts: 11124
Joined: 06 Jun 2014
Location: UK

Re: Bank Angle Indicator Not Moving

Post Nick - A2A »

Hello Harron - welcome to the A2A forums.

Not sure if you mean the attitude indicator (artificial horizon in old speak) or the turn coordinator. However, have you modified your default scenario in P3Dv5 at all, and if so, which aircraft and airport does it load?

Also, have you tried reloading the 172 once the scenario has initialised as sometimes that can resolve odd issues? To do this you can assign a keystroke to the "reload user object" action in P3D as shown (this action is unbound by default).

Image

Thanks,
Nick
A2A Simulations Inc.

Harron
Airman Basic
Posts: 3
Joined: 16 May 2020

Re: Bank Angle Indicator Not Moving

Post Harron »

Hi Nick,
It was the turn coordinator that does not move when banking. The artificial horizon is OK. I have not made any changes to the default scenario but I will try reloading user object and report back.
Thanks for the suggestion
Ron H

User avatar
Nick - A2A
A2A Captain
Posts: 11124
Joined: 06 Jun 2014
Location: UK

Re: Bank Angle Indicator Not Moving

Post Nick - A2A »

Thanks for confirming Ron.

One other thing to check is that the circuit breaker for the turn coordinator hasn't tripped. It's located just above the nav light switch.

Cheers,
Nick
A2A Simulations Inc.

Harron
Airman Basic
Posts: 3
Joined: 16 May 2020

Re: Bank Angle Indicator Not Moving

Post Harron »

Hi Nick,
Spot on! the circuit breaker was the culprit, so too for the fuel indicators.
Many thanks
Ron

User avatar
Nick - A2A
A2A Captain
Posts: 11124
Joined: 06 Jun 2014
Location: UK

Re: Bank Angle Indicator Not Moving

Post Nick - A2A »

You're welcome Ron and thanks for the update.

Nick
A2A Simulations Inc.

new reply

Return to “C172 Trainer Tech Support”

Who is online

Users browsing this forum: HE11DUDE04 and 3 guests