The NAV!/NAV2 audio functions are not TOGGLE variables as the marker, dme and adf are since the NAV audio alsojmann wrote:How do you get the Nav 1 and Nav 2 buttons to toggle on and off on the audio panel? I have a Leo board and can get the marker, dme, and adf to toggle on and off but I can only seem to get the nav 1, nav 2 buttons to turn on with a button press but they will not toggle off. I have tried every fsuipc combination I can think of.
depends upon the IDENT function being operable.
I use a separate button to switch them off. My C172.MCRO file is #16 so the codes below, CM16:53,0 and such
refer to MCRO file entries. Ignore the B66C0=6 entries as those are my conditional codes to implement multiple modes.
This group is 'Mode 6' ...I have 7 modes for the 172 controls. That is 7 unique controls assigned to each of my Saitek
dual throttle quad switches
The implementation uses a mix of FSX controls (Cxxxxx) and MCRO-defined L:Vars.
Code: Select all
7!==//------- Control Set 7 -----------------
90=B66C0=6 PD,14,C65837,1 ;// NAV 1 AUDIO AND IDENT ON
91=B66C0=6 PD,15,CM16:53,0 ;// NAV 1 AUDIO OFF <--- NOTE the 3 functions here on the same key press (PD,15)
92=B66C0=6 PD,15,CM16:49,0 ;// NAV 1 IDENT OFF
93=B66C0=6 PD,15,C65832,0 ;// VOR1 IDENT OFF
94=B66C0=6 PD,16,C65838,1 ;// NAV 2 AUDIO AND IDENT ON
96=B66C0=6 PD,17,CM16:54,0 ;// NAV 2 AUDIO OFF <--- NOTE the 3 functions here on the same key press (PD,17)
97=B66C0=6 PD,17,CM16:50,0 ;// NAV 2 IDENT OFF
98=B66C0=6 PD,17,C65833,0 ;// VOR2 IDENT OFF
99=B66C0=6 PD,18,C65846,0 ;// ADF AUDIO TOGGLE
100=B66C0=6 PD,19,C66477,0 ;// MKR AUDIO TOGGLE
101=B66C0=6 PA,0,C65844,0 ;//DME TOGGLE
Code: Select all
49=L:Nav1PullIdent=SET
50=L:Nav2PullIdent=SET
51=L:kma26MkrSwitch=TOGGLE
52=L:kma26AdfSwitch=TOGGLE
53=L:kma26Nav1Switch=SET
54=L:kma26Nav2Switch=SET
55=L:kma26DmeSwitch=TOGGLE
56=L:kma26Nav1SwitchButton=TOGGLE
57=L:kma26Com1Switch=TOGGLE
58=L:kma26Com2Switch=TOGGLE
59=L:kma26Com3Switch=SET
60=L:ComPushButton=SET
61=L:kma26SelectorKnob_pos=SET
of your controller switches ans the OFF codes for the 2nd press.
Paul