Search found 16 matches
- 17 Aug 2023, 10:30
- Forum: Comanche 250 for MSFS Tech Support
- Topic: New issue with starter on Honeycomb yoke in V1.2
- Replies: 1
- Views: 199
New issue with starter on Honeycomb yoke in V1.2
I am really enjoying the Comanche in MSFS but noticed that the behavior of the start function changed with the 1.2 patch on the Honeycomb yoke. When I turn the "key" on the yoke from off to magneto R it immediately engages the starter as well. I have not changed the standard configuration....
- 15 Feb 2022, 05:08
- Forum: Pilot's Lounge
- Topic: A2A is MIA
- Replies: 447
- Views: 67631
Re: A2A is MIA
Was surprised to learn that Asobo/MS are looking at advanced aerodynamic modelling with up to 1000 surfaces and advanced airflow modelling that will be introduced in an updated B350 in a recent interview. I thought this was part of the sim as it was punted in the original marketing hype long before ...
- 30 May 2020, 14:15
- Forum: C172 Trainer Tech Support
- Topic: Fuel leak in P3D V5 - can not be repaired
- Replies: 2
- Views: 3347
Re: Fuel leak in P3D V5 - can not be repaired
Hi,
It seems like I missed that update, looks like I checked the 172. Updated and I will monitor.
Thanks for the quick response.
Regards.
It seems like I missed that update, looks like I checked the 172. Updated and I will monitor.
Thanks for the quick response.
Regards.
- 30 May 2020, 06:39
- Forum: C172 Trainer Tech Support
- Topic: Fuel leak in P3D V5 - can not be repaired
- Replies: 2
- Views: 3347
Fuel leak in P3D V5 - can not be repaired
After a crash I am getting a fuel leak that stays even if I click on the red letters indicating the leak in P3D V5 in the hanger. If I go to the engine screen nothing is red. The aircraft will not start even if I select auto start. https://pinepix.co.za/piwigo/upload/2020/05/30/20200530133042-03fba7...
- 17 May 2020, 10:11
- Forum: P-51 Tech Support
- Topic: GPS Not working in P3D V5 with HF
- Replies: 1
- Views: 6303
GPS Not working in P3D V5 with HF
The Default GPS in the P51 stays blank in P3D V5 HF1. The screen stays blank even if I cycle the Avionics switch and use the on/off switch on the unit. The radios do come on. I tried the F1 GTN650 and that does come on but does not work well in the Windows 2004 update suggested for stability reasons...
- 17 Dec 2019, 15:45
- Forum: C172 Trainer Tech Support
- Topic: FPS impact with cockpit lights on after PBR update
- Replies: 35
- Views: 5065
Re: FPS impact with cockpit lights on after PBR update
Seems like the glareshield is the problem (Same location and settings) Glareshield off (66 fps) https://pinepix.co.za/piwigo/upload/2019/12/17/20191217223037-f8947019.jpg Glareshield On (23 fps) https://pinepix.co.za/piwigo/upload/2019/12/17/20191217223035-a29f2ade.jpg AS Airbus A330 with most inter...
- 17 Dec 2019, 14:18
- Forum: C172 Trainer Tech Support
- Topic: FPS impact with cockpit lights on after PBR update
- Replies: 35
- Views: 5065
Re: FPS impact with cockpit lights on after PBR update
Had the same experience with a massive impact on the GPU usage and performance. I could previously run 4xSSAA at around 50-60 fps (i7 9700K with a GTX1080 on a 2560x1440 display) without any problem. Now I am getting 25 fps with the GPU sitting at 100% load all the time from within the cockpit and C...
- 29 Nov 2018, 04:05
- Forum: Pilot's Lounge
- Topic: Prepar3D v4.4 - released
- Replies: 27
- Views: 4019
Re: Prepar3D v4.4 - released
Any official news regarding compatibility of the A2A V4 products with version 4.4?
Any one tried it just in case and found any problems.
I fly A2A aircraft almost exclusively and will delay my upgrade until it is confirmed that my hanger is OK.
Regards.
Any one tried it just in case and found any problems.
I fly A2A aircraft almost exclusively and will delay my upgrade until it is confirmed that my hanger is OK.
Regards.
- 04 Nov 2018, 17:07
- Forum: Pilot's Lounge
- Topic: Migrate A2A aircraft to a new PC
- Replies: 2
- Views: 686
Re: Migrate A2A aircraft to a new PC
Thank you very much.
- 04 Nov 2018, 07:48
- Forum: Pilot's Lounge
- Topic: Migrate A2A aircraft to a new PC
- Replies: 2
- Views: 686
Migrate A2A aircraft to a new PC
Hi, I am in the process of building a new PC for P3D version 4 as my existing PC is getting a bit outdated. I am sure that this must have come up before but I could not find any topics in this regards. What is the best way to migrate my A2A aircraft to the new PC. 1. Do I need to download and re-ins...
- 31 Aug 2018, 01:15
- Forum: P-51 Mustang (Military & Civilian)
- Topic: can not fly this plane
- Replies: 30
- Views: 8103
Re: can not fly this plane
Interesting read. I just installed the P51 (Civilian) in P3D V4.3 and was very surprised when I tried my first takeoff as I almost immediately crashed. I have both the T6 and Spitfire and fly them both regularly but the P51 really surprised me. After making sure my trim settings are correct and taki...
- 08 Jun 2018, 06:31
- Forum: Spitfire MkI/II
- Topic: Tilly orifice, is it installed
- Replies: 3
- Views: 1435
Re: Tilly orifice, is it installed
Thanks for the quick reply, fortunately I have not encountered any ME109's yet.
- 08 Jun 2018, 05:58
- Forum: Pilot's Lounge
- Topic: Why am I being forced to use Paypal
- Replies: 9
- Views: 1758
Re: Why am I being forced to use Paypal
Eventually gave up and created a Paypal account. Even if you enter the credit cared details the Paypal section at the bottom of the screen does not allow you proceed as some Paypal required fields are missing.
- 08 Jun 2018, 05:50
- Forum: Spitfire MkI/II
- Topic: Tilly orifice, is it installed
- Replies: 3
- Views: 1435
Tilly orifice, is it installed
I just purchased the Spitfire for P3d V4 and I am enjoying the experience (smashed 2 "airscrews" on the first day but now I getting the hang of the plane). I was wondering if the Tilly orifice is fitted to the A2A Spitfires in this package. The accu-sim manual states that it was fitted to ...
- 06 Jun 2018, 09:38
- Forum: Pilot's Lounge
- Topic: Why am I being forced to use Paypal
- Replies: 9
- Views: 1758
Why am I being forced to use Paypal
How can I purchase from the shop without being forced to create a paypal account