Search found 876 matches
- 13 Feb 2024, 16:13
- Forum: Comanche 250 for MSFS
- Topic: Switch to MSFS Marketplace version
- Replies: 5
- Views: 379
Re: Switch to MSFS Marketplace version
You will get slower updates pm Market Placee.
- 02 Sep 2023, 15:53
- Forum: Comanche 250 for MSFS Tech Support
- Topic: Engine quitting at idle, goes below 500 rpm
- Replies: 11
- Views: 888
Re: Engine quitting at idle, goes below 500 rpm
I had the same problems with only one marginal cylinder, still in the green (on the visual scale it appeared to still yield 65% of the full compression). Replacing this one cylinder solved the issue. I just overhauled the engine on the engine analyzer page, and the problem is fixed. I read your pos...
- 02 Sep 2023, 07:44
- Forum: Comanche 250 for MSFS Tech Support
- Topic: Engine quitting at idle, goes below 500 rpm
- Replies: 11
- Views: 888
Engine quitting at idle, goes below 500 rpm
Starting yesterday,. I am experiencing the engine quitting at idle speed, drops below 500 rpm and quits. Using Fine wire plugs, mag check is fine as well as engine inspection, no problems found. Only thing I see is #6 compression is slighty low, but still in green. Idle is rough, before it quits. An...
- 01 Sep 2023, 08:39
- Forum: Comanche 250 for MSFS Tech Support
- Topic: Last update Hobbs hours and fine wire plugs
- Replies: 3
- Views: 267
Re: Last update Hobbs hours and fine wire plugs
OK, will do..
Whoops, I see what I did wrong. I selected another livery with the same colors ( too many white/ Red Comanches. ) I am not flying the one I had been.. Pilot error.....LOL
Whoops, I see what I did wrong. I selected another livery with the same colors ( too many white/ Red Comanches. ) I am not flying the one I had been.. Pilot error.....LOL
- 01 Sep 2023, 08:17
- Forum: Comanche 250 for MSFS Tech Support
- Topic: Last update Hobbs hours and fine wire plugs
- Replies: 3
- Views: 267
Last update Hobbs hours and fine wire plugs
I noticed since the last update, I lost all the hours I had on the same livery and also my fine wire plugs were removed. Is that normal?
- 04 Aug 2023, 14:15
- Forum: Comanche 250 for MSFS Tech Support
- Topic: Solved: Press to Test - Indicator lamps
- Replies: 8
- Views: 309
Re: Press to Test - Indicator lamps
Put you mouse over the bulb, press left mouse button and hold it down, and then press the right mouse button at the same time.
- 04 Aug 2023, 11:11
- Forum: Comanche 250 for MSFS
- Topic: Magnetos failure?
- Replies: 10
- Views: 623
Re: Magnetos failure?
This plane is incredible!!!! Yes it is and welcome to your new A2A Addiction!!! :D I have never, in any other A2A airplanes or IRL, leaned the mixture for taxi or any other ground operations unless I'm at 5000' ASL+...and even then I usually don't because I forget :lol: In those case I usually noti...
- 04 Aug 2023, 11:08
- Forum: Comanche 250 for MSFS
- Topic: Comanche ground effect and Landing
- Replies: 62
- Views: 3136
Re: Comanche ground effect and Landing
I have had pretty good luck with slowing the approach to 80 mph rather than 90, unless I am at max gross weight.
- 03 Aug 2023, 14:38
- Forum: Comanche 250 for MSFS Tech Support
- Topic: Electric fuel pump and fuel flow
- Replies: 16
- Views: 772
Re: Electric fuel pump and fuel flow
That he's talking about the fuel flow gauge and not the fuel pressure gauge. How is the fuel going to flow prior to engine start? I was wondering the same thing but that is what he was asking about. If I saw fuel flowing with the engine off, I would be looking for my fire extinguisher.
- 03 Aug 2023, 14:24
- Forum: Comanche 250 for MSFS Tech Support
- Topic: Electric fuel pump and fuel flow
- Replies: 16
- Views: 772
Re: Electric fuel pump and fuel flow
How is the fuel going to flow prior to engine start?
- 03 Aug 2023, 14:16
- Forum: Comanche 250 for MSFS Tech Support
- Topic: Electric fuel pump and fuel flow
- Replies: 16
- Views: 772
- 03 Aug 2023, 14:02
- Forum: Comanche 250 for MSFS Tech Support
- Topic: Electric fuel pump and fuel flow
- Replies: 16
- Views: 772
Re: Electric fuel pump and fuel flow
The gauge on mine works fine, pressure comes right up when I turn on the fuel pump.
- 03 Aug 2023, 08:35
- Forum: Comanche 250 for MSFS Tech Support
- Topic: No TDS 750 after update
- Replies: 8
- Views: 557
Re: No TDS 750 after update
The PMS GTN 750 works fine, so it must be something with the TDS.
- 03 Aug 2023, 08:22
- Forum: Comanche 250 for MSFS Tech Support
- Topic: Procedure for stopping the engine?
- Replies: 10
- Views: 622
Re: Procedure for stopping the engine?
Haha - no prob, to be fair, with this piston engine stuff it is so much the default that any exception should be in a red box. :D It is (almost) always the mixture that is used to kill the engine, stuff that you would not be looking from the manual at all, once properly introduced into such kind of...
- 03 Aug 2023, 08:18
- Forum: Comanche 250 for MSFS Tech Support
- Topic: Wheel Spin in parking position with wheel chocks
- Replies: 13
- Views: 702
Re: Wheel Spin in parking position with wheel chocks
I have never given any aircraft I fly, full throttle with wheel chocks in place. What is the point?