A2A Development Update 4/8/18

This is the place where we can all meet and speak about whatever is on the mind.
Buffy Foster

Re: A2A Development Update 4/8/18

Post by Buffy Foster »

Killratio wrote: I was recently in court as moral support for one of my friends (falsely) accused of stealing 10 rolls of toilet paper.
I asked him how he was going to plead ...quilty or not quilty.......
You go to your room and you think about what you've done. :P

User avatar
DHenriques_
A2A Chief Pilot
Posts: 5711
Joined: 27 Mar 2009, 08:31
Location: East Coast United States

Re: A2A Development Update 4/8/18

Post by DHenriques_ »

Buffy Foster wrote:
Killratio wrote: I was recently in court as moral support for one of my friends (falsely) accused of stealing 10 rolls of toilet paper.
I asked him how he was going to plead ...quilty or not quilty.......

You go to your room and you think about what you've done. :P
With a bit of re-adjusting and some rework by Victor Hugo I believe we might come up with the opening line from Les Misérables . LOL

User avatar
Killratio
A2A Spitfire Crew Chief
Posts: 5785
Joined: 29 Jul 2008, 23:41
Location: The South West of the large island off the north coast of Tasmania
Contact:

Re: A2A Development Update 4/8/18

Post by Killratio »

Buffy Foster wrote: You go to your room and you think about what you've done. :P
:lol: :lol: :lol:

DHenriquesA2A wrote: With a bit of re-adjusting and some rework by Victor Hugo I believe we might come up with the opening line from Les Misérables . LOL

Dudley, I've never even been to D__________ , not even at 6.15pm

;)
<Sent from my 1988 Sony Walkman with Dolby Noise Reduction and 24" earphone cord extension>


Image

User avatar
Styggron
Master Sergeant
Posts: 1031
Joined: 30 Oct 2015, 14:28

Re: A2A Development Update 4/8/18

Post by Styggron »

Whatever the bonanza has install for us I hope there are NEW innovation in there.

By that I don't mean
1. Expanded walk around
2. Expanded improved checklist
3. Expanded hangar options
4. improved sounds

These build upon existing innovations. Now don't get me wrong, these are VITAL as well.
Yes of course the plane is NEW so controls etc

When I mean new innovation, I mean something NOT seen before and again I don't mean "all under the hood" where it is not immediately obvious. (This is still important of course because it builds on absolujte realism A2A give you with accu-sim) I mean things I can SEE that are absolutely NEW.

What should they be ? That is up to A2A. I am sure they always strive for innovation which makes them the best.
Accufeel V2, C172 , B377+L049+COTS, B17G, Piper Cub,Commanche,Cherrokee,Spitfire,Bonanza, P47,P40,both Mustangs
Aircraft Factory Avro Anson, Albatros DIII,Heinkel He-219, F4U Corsair, P51H Mustang, Avro 504, BF109
Watch my incompetent flying Twitch

Archive88
Airman First Class
Posts: 93
Joined: 01 Mar 2016, 19:08
Location: Washington state

Re: A2A Development Update 4/8/18

Post by Archive88 »

It's now 2018 and most of the comments go way back.
So what's the status of this aircraft today - May 2018?

User avatar
Jacques
Senior Master Sergeant
Posts: 2376
Joined: 26 Jun 2011, 17:54
Location: West Coast, USA

Re: A2A Development Update 4/8/18

Post by Jacques »

Archive88 wrote:It's now 2018 and most of the comments go way back.
So what's the status of this aircraft today - May 2018?
You mean the Bonanza? Well, they tease...and then someday, under the cover of darkness, it is released! If there is something they have discovered during development that will push the release back a bit, sometimes Scott will explain what they found...but there is no timeline we can see...or are privy to. It happens when it happens. In A2A's defense, there has been a lot going on behind the scenes with a new storefront, new installers and automatic updates (thanks Nick!) and the painstaking process of moving aircraft over to the P3Dv4.x platform. So, quite a lot of activity actually.


Sent from my iPad using Tapatalk

User avatar
Piper_EEWL
Chief Master Sergeant
Posts: 4544
Joined: 26 Nov 2014, 14:14
Location: Germany

Re: A2A Development Update 4/8/18

Post by Piper_EEWL »

Archive88 wrote:It's now 2018 and most of the comments go way back.
So what's the status of this aircraft today - May 2018?
Here is Scott’s latest update from page 19 of the thread:
http://a2asimulations.com/forum/viewtop ... 55#p487239
Which is dated May 10th 2018.

Happy flying
B377&COTS, J3 Cub, B-17G, Spitfire, P-40, P-51D, C172, C182, Pa28, Pa24, T-6 Texan, L-049&COTS, Bonanza V35B

User avatar
Lewis - A2A
A2A Lieutenant Colonel
Posts: 33284
Joined: 06 Nov 2004, 23:22
Location: Norfolk UK
Contact:

Re: A2A Development Update 4/8/18

Post by Lewis - A2A »

Archive88 wrote:It's now 2018 and most of the comments go way back.
So what's the status of this aircraft today - May 2018?
mmmm, it was only just over a month ago when this entire thread was posted. Hence the title 4/8/18

thanks,
Lewis
A2A Facebook for news live to your social media newsfeed
A2A Youtube because a video can say a thousand screenshots,..
A2A Simulations Twitter for news live to your social media newsfeed
A2A Simulations Community Discord for voice/text chat

pilot37
Senior Airman
Posts: 101
Joined: 06 May 2010, 05:18

Re: A2A Development Update 4/8/18

Post by pilot37 »

Styggron wrote:Whatever the bonanza has install for us I hope there are NEW innovation in there.

By that I don't mean
1. Expanded walk around
2. Expanded improved checklist
3. Expanded hangar options
4. improved sounds

These build upon existing innovations. Now don't get me wrong, these are VITAL as well.
Yes of course the plane is NEW so controls etc

When I mean new innovation, I mean something NOT seen before and again I don't mean "all under the hood" where it is not immediately obvious. (This is still important of course because it builds on absolujte realism A2A give you with accu-sim) I mean things I can SEE that are absolutely NEW.

What should they be ? That is up to A2A. I am sure they always strive for innovation which makes them the best.
Much higher wear rate options for those of us who rarely fly more than 20 hours in an aircraft before dying of boredom. (For non A2A make that 3 hours).

My span of attention is dropping with flight sims particularly after the immersion of racing sims with VR and force feedback, P3D is a bit flat. All the newer stuff coming to P3D has me spending more time performance tweaking than flying, and I have a pretty fast i7/1080 rig. A2A is the only stuff now that keeps me coming back and there is not much of it. Anybody seen the Dead Stick ads?

I had more fun trying to return my spluttering, shot up with bullet holes through the gauges, Sopwith Camel to base in Knights of the Sky and that was on the Amiga 100 so I lasted this long with flight sims ;-) In fact my first sim was a wire frame one on a Dragon computer. I do hope A2A can see beyond the current range flight sims.
Image

VH-MAL
Senior Airman
Posts: 243
Joined: 14 Nov 2010, 16:48
Location: Up the road from YGWA

Re: A2A Development Update 4/8/18

Post by VH-MAL »

pilot37 wrote:
Anybody seen the Dead Stick ads?
Yes - looks interesting!

okansacli
Airman Basic
Posts: 5
Joined: 27 May 2018, 04:56

Re: A2A Development Update 4/8/18

Post by okansacli »

Hello

Are there any updates on the progress for an new AccuFeel (air land and see) for P3Dv4 ?

Regards from Istanbul

Okan Sacli

User avatar
Lewis - A2A
A2A Lieutenant Colonel
Posts: 33284
Joined: 06 Nov 2004, 23:22
Location: Norfolk UK
Contact:

Re: A2A Development Update 4/8/18

Post by Lewis - A2A »

pilot37 wrote:
Much higher wear rate options for those of us who rarely fly more than 20 hours in an aircraft before dying of boredom. (For non A2A make that 3 hours).

My span of attention is dropping with flight sims particularly after the immersion of racing sims with VR and force feedback, P3D is a bit flat. All the newer stuff coming to P3D has me spending more time performance tweaking than flying, and I have a pretty fast i7/1080 rig. A2A is the only stuff now that keeps me coming back and there is not much of it. Anybody seen the Dead Stick ads?

I had more fun trying to return my spluttering, shot up with bullet holes through the gauges, Sopwith Camel to base in Knights of the Sky and that was on the Amiga 100 so I lasted this long with flight sims ;-) In fact my first sim was a wire frame one on a Dragon computer. I do hope A2A can see beyond the current range flight sims.
That sounds like a personal issue of upping your immersion or waining interest in FS, as a sim racer myself I find FS just as immersive in VR for example, if not more. I don't limit myselt to a single sim platform or genre either, fighting on the bitter Eastern Front in VR is stunning for example, as is flying peace keeping in Jets in another platform. Lots of platforms to keep FS fresh and interesting, each with its own's pros and cons over the next one similar to race titles.

thanks,
Lewis
A2A Facebook for news live to your social media newsfeed
A2A Youtube because a video can say a thousand screenshots,..
A2A Simulations Twitter for news live to your social media newsfeed
A2A Simulations Community Discord for voice/text chat

alan CXA651
Senior Master Sergeant
Posts: 2438
Joined: 15 Mar 2016, 08:23

Re: A2A Development Update 4/8/18

Post by alan CXA651 »

Hi.
I still use FSXA , and will stay with that till all the A2A are transfered to P3Dv3 and 4 , as i fly with CXA va on vatsim in the Connie or C172 , and also fly with the 91st bombardment group in A2A B17 and P47/P51 if doing escort , the B17 is modified with things like extra nav equip, norden , vac mod and a pukka module , this can seriously damage your aircraft if hit by flak.
So if you have P3Dv3 or FSX with A2A B17 and like getting shot up and limping home , give it a try , and the B17 none accusim does work in P3Dv4 , but it needs accusim and FSUIPC for the pukka module to work.
regards alan. 8)
Image
Image
Image
Image

User avatar
caleb1
Senior Airman
Posts: 215
Joined: 15 Dec 2016, 18:44

Re: A2A Development Update 4/8/18

Post by caleb1 »

okansacli wrote:Hello

Are there any updates on the progress for an new AccuFeel (air land and see) for P3Dv4 ?

Regards from Istanbul

Okan Sacli
It seems like they are working on it (I'm not sure what other updates they can give besides that, I have seen many people ask it) but it probably won't be out until another 6 months to 1 year have passed.

Are there any updates Lewis? :)
Caleb Byers

A2A Hanger: C182, C172, PA-28, PA-24, J3

PC: Intel Core i7 6700 @ 3.4 GHz to 4.0 GHz, 24GB RAM, GTX 745 with 4GB VRAM, 2TB SSHD, Win 10 Home x64.

Simulators: P3D v3.4, P3D v4.5, FSX:SE

Real Hanger at FD08: 1956 C172, 1964 PA-24 400

User avatar
Lewis - A2A
A2A Lieutenant Colonel
Posts: 33284
Joined: 06 Nov 2004, 23:22
Location: Norfolk UK
Contact:

Re: A2A Development Update 4/8/18

Post by Lewis - A2A »

okansacli wrote:Hello

Are there any updates on the progress for an new AccuFeel (air land and see) for P3Dv4 ?

Regards from Istanbul

Okan Sacli
No news just yet other than we still want to push it out.

thanks,
Lewis
A2A Facebook for news live to your social media newsfeed
A2A Youtube because a video can say a thousand screenshots,..
A2A Simulations Twitter for news live to your social media newsfeed
A2A Simulations Community Discord for voice/text chat

new reply

Return to “Pilot's Lounge”

Who is online

Users browsing this forum: No registered users and 35 guests