Am I The Only One...
-
- Staff Sergeant
- Posts: 325
- Joined: 13 Oct 2004, 01:45
Am I The Only One...
...who's 2D pop-up panels don't work on the "N" model (To solve the problem, I had to resort to using the Razorback's pop-up panels)
-
- Technical Sergeant
- Posts: 527
- Joined: 15 Aug 2004, 16:15
-
- Staff Sergeant
- Posts: 325
- Joined: 13 Oct 2004, 01:45
-
- Staff Sergeant
- Posts: 325
- Joined: 13 Oct 2004, 01:45
Don't know if you guys tried this yet. In the "N" model's panel .cfg file
go to the panel sections that deal with the trim and electric panels. These are the two icons that didn't work for me either at first.
Change the Ident values for each.
Change the Ident value data line on the trim from "12" to "150"
Change the Ident value data line on the electric from "14" to "125"
Each section should look like this:
//--------------------------------------------------------
[Window04]
file=trim.bmp
size_mm=260,260
position=6
visible=0
ident=150
//--------------------------------------------------------
[Window05]
file=electric.bmp
size_mm=520,74
position=7
visible=0
ident=125
See if that helps.
go to the panel sections that deal with the trim and electric panels. These are the two icons that didn't work for me either at first.
Change the Ident values for each.
Change the Ident value data line on the trim from "12" to "150"
Change the Ident value data line on the electric from "14" to "125"
Each section should look like this:
//--------------------------------------------------------
[Window04]
file=trim.bmp
size_mm=260,260
position=6
visible=0
ident=150
//--------------------------------------------------------
[Window05]
file=electric.bmp
size_mm=520,74
position=7
visible=0
ident=125
See if that helps.
-
- Staff Sergeant
- Posts: 325
- Joined: 13 Oct 2004, 01:45
Good catch FAC You know, I was looking at that line in particular thinking..."something doesn't seem quite right".....I'll try this when I get a chanceFAC257 wrote:Don't know if you guys tried this yet. In the "N" model's panel .cfg file
go to the panel sections that deal with the trim and electric panels. These are the two icons that didn't work for me either at first.
Change the Ident values for each.
Change the Ident value data line on the trim from "12" to "150"
Change the Ident value data line on the electric from "14" to "125"
Each section should look like this:
//--------------------------------------------------------
[Window04]
file=trim.bmp
size_mm=260,260
position=6
visible=0
ident=150
//--------------------------------------------------------
[Window05]
file=electric.bmp
size_mm=520,74
position=7
visible=0
ident=125
See if that helps.
I happen to fly my "N" model tonight and I noticed that my mouse couldn't do anything in the "VC" panel!!
I also had the "2D" issue! And I also noticed that my Radio configuration changed from what I had set up!!
Apparently the "update" to remove the rockets DOES more than just remove the rockets!!!!
I also had the "2D" issue! And I also noticed that my Radio configuration changed from what I had set up!!
Apparently the "update" to remove the rockets DOES more than just remove the rockets!!!!
Bill
That very well could be Seagull, I just never experienced that issue until last night! I really didn't think it was a WOP issue - ever since I started purchasing their stuff I've never had a problem or complaint - they put out some great products!!
It's just that I'm not as well versed into this programming etc as some of these folks are so I sort of learn something just about every time I turn it on!!!!!
It's just that I'm not as well versed into this programming etc as some of these folks are so I sort of learn something just about every time I turn it on!!!!!
Bill
Guys, if you move the eyepoint too much backwards it will sink into the model's parts - here it's the armoured plate behind the pilot's head. You won't be able to see that fact because the Game cuts out all objects close to the eyepoint. And you are not able to click anything because you - the eyepoint in flash - are behind an invisible wall. You can still use Radio pop-up to call Huston for help
regards
ROB
regards
ROB
Who is online
Users browsing this forum: No registered users and 20 guests