Our knobs are bigger. Hmm, could become an advertising slogan....ryanbatc wrote:Tuning knobs is the same "easiness" with RXP vs the 155A's
Don't worry, I get your point.
Our knobs are bigger. Hmm, could become an advertising slogan....ryanbatc wrote:Tuning knobs is the same "easiness" with RXP vs the 155A's
Have you been to the hanger to check everything is alright?Neon wrote:I have different problem to those mentioned here.
I have the RXP GNS430 & GNS530 (never use 430) also the RXP DMA (autopilot/transponder).
Everything worked fine, until FSX crashed, after that the GPS 530 will not turn on. It's
on the panel, the buttons are clickable, but it won't power up no matter what I do.
The "Alert" is altitude alerter, a feature of the autopilot. Don't think there's anything wrong there. The ALT Hold function doesn't work the same as a default FSX autopilot. I suggest reading the relevant manuals for the avionics, just to make sure you understand HOW they actually work. It's a bit tricky to start with, but this a unique avionics suit, and works very well once you are used to it. You have to re-learn how this one all works I think.Neon wrote:Also, the autopilot stopped working (not sure if this is a feature or bug) it developed an "alert"
on the display. On top of that, even though I'd set Alt Hold to 5000 ft, each time I enabled the
autopilot, the plane entered a dive with alot of down trim.
Not tried it, so don't take this as a "fix" It might not even work in the A2A model. But RXP provide a tool to insert the GNS's as windows into a plane, including the stack you mention. Maybe use that?Neon wrote:Also, if possible in a future update, I'd love to be able to have the RXP dropstack back if possible,
as it comes also with the DMA which at times is useful.
Yes I have been to the hangar, and everything is ok. I did have one minor issue withTigerclaw wrote: Have you been to the hanger to check everything is alright?
Tigerclaw wrote:The "Alert" is altitude alerter, a feature of the autopilot. Don't think there's anything wrong there. The ALT Hold function doesn't work the same as a default FSX autopilot. I suggest reading the relevant manuals for the avionics, just to make sure you understand HOW they actually work. It's a bit tricky to start with, but this a unique avionics suit, and works very well once you are used to it. You have to re-learn how this one all works I think.
Tigerclaw wrote:Not tried it, so don't take this as a "fix" It might not even work in the A2A model. But RXP provide a tool to insert the GNS's as windows into a plane, including the stack you mention. Maybe use that?
BACK UP THE PANEL.CFG FILE FIRST
When you installed the RXP did you also install the Garmin 530 trainer? It won't work without it. I'm assuming you did,n454mw wrote:Hi, I've found an issue that I thought I'd report.
I reinstalled my os about two months ago and had been flying the cub since then. Because of that I hadn't reinstalled RXP until the 172 came out. I made a few flights without it and then decided to install RXP just to try it. Instantly I started having loading issues. I selected the panel with no GPS at all as a last resort thinking that would fix the problem but they kept happening. I finally opened up process explorer by sysinternals and with FSX running and the plane loaded sitting on the Tarmac, no GPS selected as the panel config, I could go into process explorer and the process "gns530" was trying to start about once a second.
I uninstalled RXP and edited out all of the entries in the panel Cfg that mentioned gns 430 or 530. It fixed the problem, but I'm at a loss as to why it happened to start with. I have an idea that it was because I used the RXP configuration utility but I'm not sure.
While looking around in the panel Cfg file I did happen to find duplicate entries for Vcockpit 3.
Mark
Most common reason for that error is due to direct X9 not being updated during the installation. You can grab the latest direct x9 from microsoft, link is in the general troubleshooting FAQ and here:Flyingmax wrote:Discovered this hotfix after I gave up to try integrating the RXP530. Sadly, nothing of this helps. I've tried everything, replacing the panel.cfg and the .ini, it just won't work.
The problem is, that I don't know why As soon as I click "Choose Aircraft" my FSX crashes.
Any help is appreciated!
Max
Users browsing this forum: No registered users and 19 guests