The A2A Simulations Community

I've been searching around to see if anyone has used the 3D lights with Just Flight's aircraft such as the DC-3, 6B, or the Constellation, but I haven't found any configuration. Has anyone been successful in adding them to these aircraft?

_________________
i7 930 | HAF X | Noctua NH-D14 | Palit GTX460 | Corsair AX850 | ASUS P6X58D | HD103SJ 2TB 7200 RPM | 6G Mushkin DDR3 @ 1600 (6-8-6-24) | Win7 64bit Ultimate

I two would be interested to here if anyone Has managed to do the lights on just flights classic airliners, I have the connie and the landing light doesn't hold a candle to the 3D Redux lights!

I just bought the JF DC-3 and finished "lighting" her up. The are a couple versions as a couple of the planes are longer than the rest resulting in the white nav light at the rear using a different "x" position.

I added strobes because I like them If you don't "//" them out or just delete.

The landing lights are consistent for all versions.

I also added some cool exhaust effect for the engines. Again there are two sets of data as there is a long exhaust on most of the models but a short stack on a couple.

[LIGHTS]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing
light.0 = 3, -26.18, -45.80, 1.35, fx_shockwave_navred_nl,
light.1 = 3, -26.18, 45.80, 1.35, fx_shockwave_navgre_nl,
light.2 = 3, -61.78, 0.00, 2.38, fx_shockwave_navwhi_l_old , //just add in the new effect as the "x" varies
light.3 = 1, -56.59, 0.00, 13.95, fx_shockwave_beacon_rotating_red ,
light.4 = 4, -6.50, 0.00, 4.80, fx_vclighth,
light.5 = 4, -29.00, 0.00, 4.20, fx_vclighth,
light.6 = 3, -21.80, 0.0, 5.85, fx_shockwave_navwhi_l_old ,
light.7 = 3, -17.70, 0.0, -3.650, fx_shockwave_navwhi_l_old

//------------------ Strobes -------------------------
light.8 = 2, -26.18, -45.80, 1.35, fx_shockwave_strobe_l_nl,
light.9 = 2, -26.18, 45.80, 1.35, fx_shockwave_strobe_l_nl_3,

//------------------- Landing Lights -----------------------------
light.10 = 5, -17.00 , -19.20 , -1.80 , fx_Shockwave_landing_light_tail_old
light.11 = 5, -17.00 , 19.20 , -1.80 , fx_Shockwave_landing_light_tail_old

//------------ ExhaustFlames -------- LONG STACK VERSION
//index,type, long, lat, vert, fx_filename
light.12= 3, -19.50, 11.70, -3.90, fx_V12_IDLE_starb,
light.13= 3, -19.50, 11.70, -3.90, fx_V12_MAX_starb,
light.14= 3, -19.50, 11.70, -3.90, fx_V12_Exhaust,

light.15= 3, -19.50, -11.70, -3.90, fx_V12_IDLE_starb,
light.16= 3, -19.50, -11.70, -3.90, fx_V12_MAX_starb,
light.17= 3, -19.50, -11.70, -3.90, fx_V12_Exhaust,

//------------ ExhaustFlames -------- SHORT STACK VERSION
//index,type, long, lat, vert, fx_filename
light.13= 3, -18.50, 11.70, -4.10, fx_V12_IDLE_starb,
light.14= 3, -18.50, 11.70, -4.10, fx_V12_MAX_starb,
light.15= 3, -18.50, 11.70, -4.10, fx_V12_Exhaust,

light.16= 3, -18.50, -11.70, -4.10, fx_V12_IDLE_starb,
light.17= 3, -18.50, -11.70, -4.10, fx_V12_MAX_starb,
light.18= 3, -18.50, -11.70, -4.10, fx_V12_Exhaust,

_________________
Racartron
"it means something but I can't remember what"

Hi Racartron,

Many thanks for the DC 3 light up info!!!

Had a crack at Just Flights C69 and L049 Connie light up (Nose Landing Light version)

In Aircraft CFG File (BOTH FOR C69 AND L049)
[LIGHTS]
light.0 = 3, -5.40, -62.82, 5.10, fx_shockwave_navred.fx
light.1 = 3, -5.40, 62.82, 5.10, fx_shockwave_navgre.fx
light.2 = 3, -62.60, 0.00, 4.52, fx_shockwave_navwhi_l.fx
light.3 = 1, -7.40, 0.00, 8.30, fx_shockwave_beacon_rotating_red.fx
light.4 = 1, -12.30, 0.00, -4.30, fx_shockwave_beacon_rotating_red.fx
light.5 = 4, 15.75, 0, 3, fx_shockwave_vclight.fx
light.6 = 5, 35.75, 0.00, -1.00, fx_shockwave_landing_light.fx

In Panel CFG File (BOTH FOR C69 & L049)
VC Cockpit01 (under gauge 11)

gauge12=shockwave_lights_gear,1,1,1,1 //shockwave light


works for me!