So yeah this has happened since upgrading to p3d 4.4 and it was just the filter as i needed it one time so i put it on but every few mins i noticed it had gone back to off it happened one other time when it wasn't needed and it kept turning on but other than that it was fine. However, today after landing the carb heat was on i never turned it on and there isn't anything set to it in the control settings (I checked every device) so i'm not sure if this is just me or no one else has noticed but it is very strange. Let it be noted that there isn't any option to have the carb air filter set as anything (in my sim anyway) and i checked the input config.
Regards He11dude
Carb heat and filter levers moving without any input
-
- Staff Sergeant
- Posts: 368
- Joined: 21 Jan 2017, 13:49
-
- Staff Sergeant
- Posts: 368
- Joined: 21 Jan 2017, 13:49
Re: Carb heat and filter levers moving without any input
Soooo... has anyone else had this issue ?
AKA "Memey"
- Nick - A2A
- A2A Captain
- Posts: 13797
- Joined: 06 Jun 2014, 13:06
- Location: UK
Re: Carb heat and filter levers moving without any input
Are you quite sure this isn't an inadvertent control input He11dude? For example, any chance carb heat is still mapped to the default 'H' key in Prepar3D, and this key somehow got pressed?
Thanks,
Nick
Thanks,
Nick
-
- Staff Sergeant
- Posts: 368
- Joined: 21 Jan 2017, 13:49
Re: Carb heat and filter levers moving without any input
it was set to h but i unmapped that yesterday and it still seems to do it
AKA "Memey"
- Nick - A2A
- A2A Captain
- Posts: 13797
- Joined: 06 Jun 2014, 13:06
- Location: UK
Re: Carb heat and filter levers moving without any input
Sounds like there's still a control conflict somewhere. Anything mapped in the P-51 Input Configurator?
Thanks,
Nick
Thanks,
Nick
-
- Staff Sergeant
- Posts: 368
- Joined: 21 Jan 2017, 13:49
Re: Carb heat and filter levers moving without any input
No the carb air filter and heat axis are both set to disabled
AKA "Memey"
-
- Staff Sergeant
- Posts: 368
- Joined: 21 Jan 2017, 13:49
Re: Carb heat and filter levers moving without any input
any updates ? it is still turning off randomly
AKA "Memey"
- Lewis - A2A
- A2A Lieutenant Colonel
- Posts: 33313
- Joined: 06 Nov 2004, 23:22
- Location: Norfolk UK
- Contact:
Re: Carb heat and filter levers moving without any input
Its will be a mapping or setting issue. Can you please double check all your controls and mapping in sim, in the A2A Input config and in any other third party software you might be using such as FSUIPC etc.
thanks,
Lewis
thanks,
Lewis
A2A Facebook for news live to your social media newsfeed
A2A Youtube because a video can say a thousand screenshots,..
A2A Simulations Twitter for news live to your social media newsfeed
A2A Simulations Community Discord for voice/text chat
A2A Youtube because a video can say a thousand screenshots,..
A2A Simulations Twitter for news live to your social media newsfeed
A2A Simulations Community Discord for voice/text chat
-
- Staff Sergeant
- Posts: 368
- Joined: 21 Jan 2017, 13:49
Re: Carb heat and filter levers moving without any input
Nothing was set to it but i removed and re-added all of my p 51 config settings and it seems to be ok I will test it properly soon
AKA "Memey"
-
- Staff Sergeant
- Posts: 368
- Joined: 21 Jan 2017, 13:49
Re: Carb heat and filter levers moving without any input
Yeah it is ok now, but if that changes I will let you know.
Thanks for your help -He11dude
Thanks for your help -He11dude
AKA "Memey"
Who is online
Users browsing this forum: No registered users and 8 guests