Wop p51 civilian Mustang issue
Wop p51 civilian Mustang issue
Hello again when I race at reno with the civilian Mustang right now the cylinder temp is supposed to be around 330 degrees Fahrenheit but for some reason it stays around 212. I was experiencing this problem yesterday so I reinstalled the civilian Mustang and changed a few things that I had previously under the aircraft CFG and when I did the cylinder temperature went down to around 200 degrees and what I had before I had set the thrust set to 2.0 and the engine power to 3.0 and that's what I had said before the problem occurred and now it is dropping the cylinder temperature how can I fix this if the cylinder temperature is supposed to be around 330 degrees
FSX Reno Air Race pilot
Re: Wop p51 civilian Mustang issue
What is outside air temp?
Andrew
ASUS ROG Maximus Hero X, Intel i7 8770K, Nvidia GTX 1080, 32GB Corsair Vengeance 3000 RAM, Corsair H90i liquid cooler.
All Accusim Aircraft
Accu-Feel, 3d Lights Redux
ASUS ROG Maximus Hero X, Intel i7 8770K, Nvidia GTX 1080, 32GB Corsair Vengeance 3000 RAM, Corsair H90i liquid cooler.
All Accusim Aircraft
Accu-Feel, 3d Lights Redux
Re: Wop p51 civilian Mustang issue
Hi Dude,
Did you try out what was suggested on the tech forum you posted to?
https://a2asimulations.com/forum/viewto ... 94&t=56088
You may post your results there and they'll likely give you follow-up responses of what to try next.
Did you try out what was suggested on the tech forum you posted to?
https://a2asimulations.com/forum/viewto ... 94&t=56088
You may post your results there and they'll likely give you follow-up responses of what to try next.
Who is online
Users browsing this forum: No registered users and 10 guests