The A2A Simulations Community

No issues during taxi, takeoff, and flight. Upon landing, FSX crashes at the moment of touchdown, and it happens every time. Apparently others have experienced the same problem as described in a recent thread. In that thread, Lewis asked for a new thread to be started, so this is it!

Relevant Notes:
1. This is the Accu-Sim P-40.
2. In the previous thread, it was suggested that a .cab file be deleted, but I found no .cab file to delete. Where is it located?
3. I deleted the P-40 "Update" folder as suggested in the other thread and updated using the most recent (1/17/2017) Accu-Sim updater. This did not fix the problem.

Thanks for your help!

I have the same issue with my P-40 with Accusim. I'm running FSX Acceleration on Windows 7 64bit.

I have run the latest Accusim update. Not everytime but very often the sim crashes to desktop once the wheels touch the runway. I don't have this issue with any of the other aircraft.

Thanks

I had the same problem before the last 2017 update, now the issue seems solved (fingers crossed). Anyway, I only did two landings, so I don't know if the problem is totally sorted.

Some food for thoughts:
I did one of my smoothest landings and after shutdown I've seen a yellow gear warning in the hangar. The mechanic told me to be easy on landings?
Sure, something on touchdown code seems screwed.

Hope this helps the developers.

The theory with the gear contact could make sense since my sim crashed yesterday while taxiing over a bump! I'll give it a try on a grass runway.

Maybe you guys could also try that?

Hello peoples,

Can I please ask if you guys have the P-40 and its Acuu-sim package or just the P-40?

Also worth noting what other Accu-sim aircraft you have installed on your system?

thanks
Lewis - A2A

Easy answer for me, I've got'em all (with accusim, of course)
You can check them in my sig

P-40 + Accusim for me too.

My other A2A aircraft are:

Stratocruiser + COTS
Piper Cub + Accusim
B17 + Accusim
Spitfire + Accusim
P51civ + Accusim
C172
C182
Cherokee
Comanche
T-6
Constellation

The P-40 is the only one causing the issue.

Hope you guys find the culprit.

One thing I forgot, can you please test with all the P-40 models and let me know if theirs any difference between them for you.

Also if you encounter the crash can you let me know what the system crash log states from the event viewer?

And lastly can I ask if you guys can try to revert to as a default system as possible, turning off and unloading all other mods to get it to be as pure as just P-40 and FSX as possible.

thanks,
Lewis

For me it definitely happens with the C model of the P-40. The others I'll have to check.

Where can I find the system crash log?

Lewis - A2A wrote: And lastly can I ask if you guys can try to revert to as a default system as possible, turning off and unloading all other mods to get it to be as pure as just P-40 and FSX as possible.

So just that I understand this correctly. You want us to install all other addons? Scenery including? That would be a lot better if work.

Thanks

No need to uninstall but you can disable FSUIPC and most add-ons from work with a simple switch or .dll temp move.

For the event viewer please see here;
http://www.isunshare.com/windows-10/6-w ... ws-10.html

http://www.tomshardware.co.uk/faq/id-31 ... iewer.html

thanks,
Lewis

Ok I see. Thanks for the clarification! I'm not using FSUIPC. I'm only running AS16 and some FTX Global as well as OpenLCEurope and NA along with some other scenery addons.

Yesterday I did some test flights with all the P-40 variants and the sim did not CTD. So I'll download an event viewer and hopefully get something the next time the sim crashes.

Thanks and happy flying

Hi guys. Did some tests yesterday trying to trigger the CTD but everything went well.
Tried to run the "B" (I've had CTDs with this version before) on bumpy surfaces jumping all around (rapid takeoffs and landings) with no problems.
Also did a full flight of about one hour with the "C" and landed without issues.

I'll report in :

Curtiss P-40C

Problem signature:
Problem Event Name: APPCRASH
Application Name: fsx.exe
Application Version: 10.0.61637.0
Application Timestamp: 46fadb14
Fault Module Name: A2A_Accusim.DLL
Fault Module Version: 1.0.0.0
Fault Module Timestamp: 5724a628
Exception Code: c0000005
Exception Offset: 000378ee
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
LCID: 1033


I also had the exact same event log for the

Tomahawk IIB

Problem signature:
Problem Event Name: APPCRASH
Application Name: fsx.exe
Application Version: 10.0.61637.0
Application Timestamp: 46fadb14
Fault Module Name: A2A_Accusim.DLL
Fault Module Version: 1.0.0.0
Fault Module Timestamp: 5724a628
Exception Code: c0000005
Exception Offset: 0003783e
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
LCID: 1033

I have not tested the other models except the AVG, which landed O.K.


.... off to work I go ..... will check here later tonight.

Thanks for coming to the rescue FlameOut. I tried everything today and I can't reproduce the issue?! Seems to have fixed itself for now

I uninstalled and reinstalled the Accu-Sim P-40, then ran the latest updater again. Since doing that I've flown the C model a couple of times without issue, so that seems to have fixed the problem.