Page 2 of 2

Re: B377 no stater sound and turbo problem accusim + cots

Posted: 29 May 2014, 16:45
by Bonanzapilot
Lewis - A2A wrote:Hello,

please can you try a reinstall of the 377 simulation

thanks,
Lewis
I have and it does not work.

Re: B377 no stater sound and turbo problem accusim + cots

Posted: 29 May 2014, 16:48
by Lewis - A2A
Hello,

can you please let me know your exact installation order, including any patches/updates.

thanks,
Lewis

Re: B377 no stater sound and turbo problem accusim + cots

Posted: 29 May 2014, 19:03
by Bonanzapilot
Lewis - A2A wrote:Hello,

can you please let me know your exact installation order, including any patches/updates.

thanks,
Lewis
1) B377
2) B377 Accusim
3) B377 COTS
4) B377 COTS 1.1 update
5) Accusim V2 (the one released the other day)

Re: B377 no stater sound and turbo problem accusim + cots

Posted: 30 May 2014, 18:12
by Lewis - A2A
Hello,

can you please send me a PM here on the forums, I'd like to try something.

thanks,
Lewis

Re: B377 no stater sound and turbo problem accusim + cots

Posted: 30 May 2014, 20:13
by Jacques
Is there an accusim_sp1 missing?

JP


Sent from my iPad using Tapatalk

Re: B377 no stater sound and turbo problem accusim + cots

Posted: 06 Jan 2018, 15:40
by fox67
Since I've installed the B377 on my new PC I've the same problem. On the old PC it works fine. Even though it's the same operating system (Win 10) and the same FSX installation (FSX+Accleration Pack) on my new PC. I've done already a few new installations but it’s still the same problem. What was the solution for your problem?

Re: B377 no stater sound and turbo problem accusim + cots

Posted: 15 Jan 2018, 11:36
by Lewis - A2A
Can you please double check your installation process and that you are doing it in the right order if not using the full COTS all in one installer.

thanks,
Lewis

Re: B377 no stater sound and turbo problem accusim + cots

Posted: 15 Feb 2018, 14:03
by fox67
I've reinstalled it and now it works. But I've a new strange problem. When I set the fuel pump on and put the mixture leveler to "Auto Rich" the needle moves back and forth around 30°. When I want to start the engine, it hangs in an endless loop in the "Startup". The engine stats up, the rpm is rising (the flight engineer also says: oil pressure is rising, oil pressure is ok) and then the rpm is abruptly falling and it starts from the beginning.

Re: B377 no stater sound and turbo problem accusim + cots

Posted: 16 Feb 2018, 05:16
by Tug002
fox67 wrote:I've reinstalled it and now it works. But I've a new strange problem. When I set the fuel pump on and put the mixture leveler to "Auto Rich" the needle moves back and forth around 30°. When I want to start the engine, it hangs in an endless loop in the "Startup". The engine stats up, the rpm is rising (the flight engineer also says: oil pressure is rising, oil pressure is ok) and then the rpm is abruptly falling and it starts from the beginning.
Check to make sure that auto mixture is not turned on in FSX.

Keep smiling
Tug :)

Re: B377 no stater sound and turbo problem accusim + cots

Posted: 16 Feb 2018, 11:00
by fox67
Thank you very much. That was the problem. I forgot those settings after the new installation of the FSX.

Re: B377 no stater sound and turbo problem accusim + cots

Posted: 22 Feb 2018, 11:54
by Lewis - A2A
Happy flying in the virtual skies

thanks,
Lewis - A2A