Hey there,
i recently got the P-40 and its great! My question is if i would purchase the Spitfire now, do i have to reinstall the P-40?
I have the P-40 + AccuSim + Core Update 1.2 installed so i guess i just have to install the Spitfire + AccuSim and it will make use of the 1.2 Core Update?
Thanks in advance for your assistance!
Lowjack
Accu-Sim Core Update v.1.2
- Skycat
- Senior Master Sergeant
- Posts: 2193
- Joined: 11 Nov 2006, 16:15
- Location: Great Falls Army Air Base, Montana
Re: Accu-Sim Core Update v.1.2
The advice I've seen given on this very question is to install the latest core update after installing the Spitfire and P-40 models. As I understand it, the P-40 doesn't include all of the Spitfire updates but the Core Update has all of the Spitfire udpates and any P-40 updates that have been offered since either of those packages' initial release.
Edit: I just re-read the question. Install the latest Core Update again after installing the Spitfire, even though you already have the P-40. Both planes will be up to date then.
Edit: I just re-read the question. Install the latest Core Update again after installing the Spitfire, even though you already have the P-40. Both planes will be up to date then.
Last edited by Skycat on 29 Feb 2012, 15:19, edited 1 time in total.
Pax Orbis Per Arma Aeria
- Lewis - A2A
- A2A Lieutenant Colonel
- Posts: 33319
- Joined: 06 Nov 2004, 23:22
- Location: Norfolk UK
- Contact:
Re: Accu-Sim Core Update v.1.2
Spot on Skycat. Install the Spitfire then get the core update and install that to update the Spitfire.
Thanks,
Lewis
Thanks,
Lewis
A2A Facebook for news live to your social media newsfeed
A2A Youtube because a video can say a thousand screenshots,..
A2A Simulations Twitter for news live to your social media newsfeed
A2A Simulations Community Discord for voice/text chat
A2A Youtube because a video can say a thousand screenshots,..
A2A Simulations Twitter for news live to your social media newsfeed
A2A Simulations Community Discord for voice/text chat
Re: Accu-Sim Core Update v.1.2
Thanks a lot guys! Now i am ready to get the Spitfire.
Re: Accu-Sim Core Update v.1.2
I installed the P-40 with Accu_Sim last week. I just purchased the Spitfire with Accu-Sim.
Do I also need the 1.2 Accu-Sim core update to have all the goodies for the Spitfire?
Do I also need the 1.2 Accu-Sim core update to have all the goodies for the Spitfire?
- Lewis - A2A
- A2A Lieutenant Colonel
- Posts: 33319
- Joined: 06 Nov 2004, 23:22
- Location: Norfolk UK
- Contact:
Re: Accu-Sim Core Update v.1.2
Hello,
yes you will want to download the update also for the spitfire.
thanks,
Lewis
yes you will want to download the update also for the spitfire.
thanks,
Lewis
A2A Facebook for news live to your social media newsfeed
A2A Youtube because a video can say a thousand screenshots,..
A2A Simulations Twitter for news live to your social media newsfeed
A2A Simulations Community Discord for voice/text chat
A2A Youtube because a video can say a thousand screenshots,..
A2A Simulations Twitter for news live to your social media newsfeed
A2A Simulations Community Discord for voice/text chat
Re: Accu-Sim Core Update v.1.2
Thanx, Lewis. I figured that out after a closer read of this thread. Anyway, I have the time to do it as I blew the damn engine on my first flight. Not quite sure what I did that was so bad as I was really trying to "manage" everything. It started with some white smoke on the right side that soon went away. But a few minutes later it came back PLUS a lot of blue smoke on the left side. This was followed by gobs of flames, a sputtering engine and eventually disaster
When they dragged her into the hanger, the maintenance crew shook their heads and booted me out. Seems everything from the crankshaft to the hydraulics were hammered.
Quite an initiation to this gal.
When they dragged her into the hanger, the maintenance crew shook their heads and booted me out. Seems everything from the crankshaft to the hydraulics were hammered.
Quite an initiation to this gal.
Re: Accu-Sim Core Update v.1.2
Haha, good story! My first Spitfire flight was going OK, but I arrived back at the airport with a lot of altitude to lose. I made the mistake of of cutting my throttle and making a long gliding descent. My sparkplugs got all fouled up, and right as I needed power on final approach I had none... I came down in the trees short of the runway. Needless to say, I've always used power on my decents ever since!
Joe
Joe
Joe
- Skulleader
- Senior Airman
- Posts: 120
- Joined: 07 Nov 2008, 12:26
- Location: France, Salon de Provence
Re: Accu-Sim Core Update v.1.2
Hello,
After many month far of the A2A products and my FSX now I'm back and I'm a little lost because I have discovered this new patch's version: Accu-Sim Core Update v.1.2
Today on my FSX I've installed these two products of A2A like that:
On this forum of the Spitfire MkI/II you have wrote:
Just run this over any accusim spit installation. The core update v.1.1 is not necessary to install first.
Please can you explain to me if my installation is correct or not ?
And of course please can you explain to me when I must installed the "Accu-Sim Core Update v.1.2" ?
If I install the "Accu-Sim Core Update v.1.2" this patch upgrade automatically my WoP3 P47 and my WoP3 Spitfire ?
A great thank's in advance for all and best regards, Olivier...
After many month far of the A2A products and my FSX now I'm back and I'm a little lost because I have discovered this new patch's version: Accu-Sim Core Update v.1.2
Today on my FSX I've installed these two products of A2A like that:
Please can you give me the good procedure for installed these 2 addons (P47 + Spitfire MkI/II) correctly and explain to me if I possess the good or bad patchs ?Wings of Power 3: P47 Razorback.
+ Accusim
+ WoP3 P47 Update v1.1
+ Accu-Sim HOTFIX v.1.11 (Only for Accu-Sim).
Wing Of Power 3 Spitfire MkI/II.
+ Accusim
+ Accu-Sim Core Update v.1.1
On this forum of the Spitfire MkI/II you have wrote:
Just run this over any accusim spit installation. The core update v.1.1 is not necessary to install first.
Please can you explain to me if my installation is correct or not ?
And of course please can you explain to me when I must installed the "Accu-Sim Core Update v.1.2" ?
If I install the "Accu-Sim Core Update v.1.2" this patch upgrade automatically my WoP3 P47 and my WoP3 Spitfire ?
A great thank's in advance for all and best regards, Olivier...
Re: Accu-Sim Core Update v.1.2
Hi Olivier-
To me it looks like you did everything correct, and in the right order! All you should need to do is run the Accu-sim 1.2 next, and you are all set. Keep in mind, it is my understanding that the P-47 (and the B-17 and Cub) are older Accu-sim aircraft, so they will not benefit from the new update 1.2. The new updates will only apply to the Spitfire, P-40 and future Accu-sim aircraft.
If I'm wrong on this, someone please correct me!
Hope this helps...
Joe
To me it looks like you did everything correct, and in the right order! All you should need to do is run the Accu-sim 1.2 next, and you are all set. Keep in mind, it is my understanding that the P-47 (and the B-17 and Cub) are older Accu-sim aircraft, so they will not benefit from the new update 1.2. The new updates will only apply to the Spitfire, P-40 and future Accu-sim aircraft.
If I'm wrong on this, someone please correct me!
Hope this helps...
Joe
Joe
- Skulleader
- Senior Airman
- Posts: 120
- Joined: 07 Nov 2008, 12:26
- Location: France, Salon de Provence
Re: Accu-Sim Core Update v.1.2
Hello Joe,
I would like to thank you for your assistance and your kindness, ouff I'm very happy to know that everything is OK.
I wish you a good day, best regards. Olivier.
I would like to thank you for your assistance and your kindness, ouff I'm very happy to know that everything is OK.
I wish you a good day, best regards. Olivier.
Who is online
Users browsing this forum: Majestic-12 [Bot] and 27 guests