hydraulic pressure and my P47 simulator

[C6_Pat]

Hi all !

I fly for a few years with my P47 cockpit simulator with your's lovely accusim razorback.

My system is very complex and i have an unsolved problem : the hydraulic pressure.


In this picture, you can see the proper functioning with a pressure of 1000.
When using my simulator and save a flight to find my initial configuration on four screens, each time the pressure is reduced by half.
The landing gears work very slowly and sometimes I even lose all pressure and so you can imagine to land.
The problem are same with or no with accusim.
I presume that this is an incompatibility with the multi screens because I did not have this problem on a single screen.

All I want is to be able to fully disable the hydraulic pressure to stay in 1000, is it possible?
Thank you for helping.

Here my last video : New York !
[youtube]http://www.youtube.com/watch?v=GM_wb6rhdlo[/youtube]

[Scott - A2A]

Did you check hydraulic pressure on other FSX planes? I ask because we are using the FSX system here.

Also, what 3rd party scenery are you using for New York?

Scott.

[C6_Pat]

This problem also exists with FSX, more or less I do not know.
Note that I have only this problem with my favorite plane: P47 A2A accusim
It's possible to disconnect this pressure ?

The scenery is from Drzewiecki : New York City V2

[Scott - A2A]

This sounds like an odd FSX bug, and without being able to experience it, I just don't know what the cause may be.

Scott.

[C6_Pat]

OK thanks for your answer.
I never really studied the problem, I'll do it and if I find I would tell you

Pat

[C6_Pat]

Accusim is not compatible with multi screen....
I will fly with other things on future meetings and exhibitions, it is a pity!

[Lewis - A2A]

I use several screens ok, as do many others, whats your exact setup?

thanks,
lewis

[C6_Pat]

Seven 64
Ram 16G
ASUS Rampage extreme 4
Proc intel i7-4960X 3.6GHZ
GE FORCE GTX TITAN 2013 with last pilots

A second i5 for jauges and GPS, but not working in but does not influence the problem (I tested with and without)

FSUIPC PAYWARE
All pilots ready
Prepar3D 2.5
SIOC SYSTEM tested with and without

All DD are SSD : one for seven, one for prepar3D, one for scenery, etc....
Four screen in 1920X1080 each, not large view with 3 screen
In Prepar 3D here is a screen for looking forward, left, right, and over the top.
All screen are independant with a different windows.
http://www.virtualp47.fr/index.php?opti ... 55&lang=fr

The problem is intermittent, but in 70% of cases the hydraulic pressure are inoperate, not with single screen.
I think accusim react badly when loading flight with multi independent views.

All I wish is to deactivate the hydraulic pressure or to leave at full capacity.

Thanks,
Pat

[Lewis - A2A]

ahh ok you mean multiple PC's. In that case yes you will have issues. With today's hardware though you shouldn't need more than one PC, even our professional partners with the full motion certified simulations are reverting to using single powerful modern PC's for powering the sims.

thanks,
Lewis

[C6_Pat]

No that's not it, I said before.
Maybe I am wrong expresses my English is average.

I have two computer but the second is a smal I5 for jauges only.
Whether on or off does not affect the bug accusim.
Besides the last few hours of tests carried out were made on the main computer only.
The problem happens only in multi screens, single screen all normally.

If you can not solve the problem, I would not blame you lol, but it will also damage to A2A.
My simulator will increasingly get out in meetings, including with the air force.
So far I have always emphasized the P47 A2A, but this bug is too restrictive and that would be a shame to give it up for a Free XP-47 for example ....

It is so hard for you to disable this function hydraulic pressure leaving a maximum capacity?

Geekopolis 2014 Paris in show room INTEL


Ferté Alais 2014

[Lewis - A2A]

Have you tried a full 100% wipe and reinstall?

As Scott's already said he cannot re-produce and ive tried a few times and also cannot re-produce any bug here.

thanks,
Lewis

[C6_Pat]

Yes of course I tried everything, with accusim, without accusim, uninstalling with Revo Uninstaller with full scan and then reinstalling ...with patch an not patch....
Windows seven was reinstalled last year, the probleme after was the same.

Sometimes when I load a flight, I see the needle on the pressure gauge in the quarter, I go to the window controls Maintenance hangar then clicking overhault.
If the computer has just been started and is the first saving flight, making it the needle comes most often in normal position(1000).
However, when I want to reload a new flight usually by doing the same action with maintenance hangar and overhault the needle go down at the bottom and it is not possible to enter and exit the train or shutters or so very very slowly.

[Lewis - A2A]

What is your default flight set too?

thanks,
Lewis

[C6_Pat]

I do not quite understand that question ... flights I use are those recorded in Prepar3d to keep in memory the position and adjustments of the four windows. I have dozens always with the same problem.

[Lewis - A2A]

What is the default flight, and also P3D not FSX?

The P-47 is an FSX product so might not work correctly in P3D there are many changes and more come with each new P3D update and patch. One of the bigger ones it seems with the latest P3D versions is the need to load up a default aircraft, make sure the default flight is a default aircraft and then switch to the complex simulation otherwise you get initialization issues.

thanks,
Lewis