Hi everyone,
My friend recently purchased some A2A aircraft with accusim as a present for me. Included was the wonderful A2A P-47.
The accusim is working OK in the game, but it doesn't seem to save the settings?
So there is no P-47 accusim save in my documents\a2a\fsx folder. I am running windows 7 64 bit. Every other accusim aircraft works fine for me and saves.
Whenever I start a new flight, the settings are erased (like new aircraft again)
Thanks for any help.
P-47 accusim problems
-
- Senior Airman
- Posts: 141
- Joined: 06 Jun 2013, 01:23
- Location: Australia
P-47 accusim problems
Cirrus SR20 pilot based out of YMMB - Moorabbin Airport, Victoria, Australia.
- Lewis - A2A
- A2A Lieutenant Colonel
- Posts: 33321
- Joined: 06 Nov 2004, 23:22
- Location: Norfolk UK
- Contact:
Re: P-47 accusim problems
Hello Jamie,
when you installed did you right click the installer and select run as admin?
Also once you have installed as administrator make sure you grab the update from here;
http://a2asimulations.com/forum/viewtop ... 55&t=14791
thanks,
Lewis - A2A
when you installed did you right click the installer and select run as admin?
Also once you have installed as administrator make sure you grab the update from here;
http://a2asimulations.com/forum/viewtop ... 55&t=14791
thanks,
Lewis - A2A
A2A Facebook for news live to your social media newsfeed
A2A Youtube because a video can say a thousand screenshots,..
A2A Simulations Twitter for news live to your social media newsfeed
A2A Simulations Community Discord for voice/text chat
A2A Youtube because a video can say a thousand screenshots,..
A2A Simulations Twitter for news live to your social media newsfeed
A2A Simulations Community Discord for voice/text chat
-
- Senior Airman
- Posts: 141
- Joined: 06 Jun 2013, 01:23
- Location: Australia
Re: P-47 accusim problems
Hi Lewis,
No, I didn't install it as administrator. I thought that would be the case, as it wouldn't have the correct permissions for the Accusim engine to write it necessary files.
Should I re run all my other aircraft as administrator? or will they be fine?
Thanks for that. Do I run those updates as admin also?
[EDIT]: Just checked the setup files on my computer, they seem to be already set to run as admin??
No, I didn't install it as administrator. I thought that would be the case, as it wouldn't have the correct permissions for the Accusim engine to write it necessary files.
Should I re run all my other aircraft as administrator? or will they be fine?
Thanks for that. Do I run those updates as admin also?
[EDIT]: Just checked the setup files on my computer, they seem to be already set to run as admin??
Cirrus SR20 pilot based out of YMMB - Moorabbin Airport, Victoria, Australia.
- Lewis - A2A
- A2A Lieutenant Colonel
- Posts: 33321
- Joined: 06 Nov 2004, 23:22
- Location: Norfolk UK
- Contact:
Re: P-47 accusim problems
Hello,
You will want to right click and select run as administrator for the P-47 installer. I wouldn't bother for the others if they are working correctly.
thanks,
Lewis - A2A
You will want to right click and select run as administrator for the P-47 installer. I wouldn't bother for the others if they are working correctly.
thanks,
Lewis - A2A
A2A Facebook for news live to your social media newsfeed
A2A Youtube because a video can say a thousand screenshots,..
A2A Simulations Twitter for news live to your social media newsfeed
A2A Simulations Community Discord for voice/text chat
A2A Youtube because a video can say a thousand screenshots,..
A2A Simulations Twitter for news live to your social media newsfeed
A2A Simulations Community Discord for voice/text chat
-
- Senior Airman
- Posts: 141
- Joined: 06 Jun 2013, 01:23
- Location: Australia
Re: P-47 accusim problems
Hi Lewis,
Alright, will try that sometime today and let you know if it works.
Thanks!
Alright, will try that sometime today and let you know if it works.
Thanks!
Cirrus SR20 pilot based out of YMMB - Moorabbin Airport, Victoria, Australia.
-
- Senior Airman
- Posts: 141
- Joined: 06 Jun 2013, 01:23
- Location: Australia
Re: P-47 accusim problems
Hi,
Got a chance to completely remove the aircraft and re run all the setups for the P-47D as admin.
The accusim file is still not saving.
Got a chance to completely remove the aircraft and re run all the setups for the P-47D as admin.
The accusim file is still not saving.
Cirrus SR20 pilot based out of YMMB - Moorabbin Airport, Victoria, Australia.
- Lewis - A2A
- A2A Lieutenant Colonel
- Posts: 33321
- Joined: 06 Nov 2004, 23:22
- Location: Norfolk UK
- Contact:
Re: P-47 accusim problems
Hello Jamie,
next thing to try would be to delete the dat file under your my documents >> A2A. Delete the P47 dat file and a new one will be generated wen you next start FSX.
next thing to try would be to delete the dat file under your my documents >> A2A. Delete the P47 dat file and a new one will be generated wen you next start FSX.
A2A Facebook for news live to your social media newsfeed
A2A Youtube because a video can say a thousand screenshots,..
A2A Simulations Twitter for news live to your social media newsfeed
A2A Simulations Community Discord for voice/text chat
A2A Youtube because a video can say a thousand screenshots,..
A2A Simulations Twitter for news live to your social media newsfeed
A2A Simulations Community Discord for voice/text chat
-
- Senior Airman
- Posts: 141
- Joined: 06 Jun 2013, 01:23
- Location: Australia
Re: P-47 accusim problems
Lewis,
The thing is that there is no P47 .dat file created. All the other planes' accusim files show up in C:\Users\Jamie Kugelmann\Documents\A2A\FSX
Very strange..
The thing is that there is no P47 .dat file created. All the other planes' accusim files show up in C:\Users\Jamie Kugelmann\Documents\A2A\FSX
Very strange..
Cirrus SR20 pilot based out of YMMB - Moorabbin Airport, Victoria, Australia.
- Lewis - A2A
- A2A Lieutenant Colonel
- Posts: 33321
- Joined: 06 Nov 2004, 23:22
- Location: Norfolk UK
- Contact:
Re: P-47 accusim problems
I'm not at my desktop at the moment so cannot check the location I might have gotten it wrong for the P-47. Ill check later when I get in the office
Also just a check that you updated to the latest version;
http://a2asimulations.com/forum/viewtop ... 55&t=14791
Also sometimes a system requires a restart for a a correct installation, this seems windows system specific but its worth a try in these situations.
thanks
Lewis - A2A
Also just a check that you updated to the latest version;
http://a2asimulations.com/forum/viewtop ... 55&t=14791
Also sometimes a system requires a restart for a a correct installation, this seems windows system specific but its worth a try in these situations.
thanks
Lewis - A2A
A2A Facebook for news live to your social media newsfeed
A2A Youtube because a video can say a thousand screenshots,..
A2A Simulations Twitter for news live to your social media newsfeed
A2A Simulations Community Discord for voice/text chat
A2A Youtube because a video can say a thousand screenshots,..
A2A Simulations Twitter for news live to your social media newsfeed
A2A Simulations Community Discord for voice/text chat
-
- Senior Airman
- Posts: 141
- Joined: 06 Jun 2013, 01:23
- Location: Australia
Re: P-47 accusim problems
Alright thanks.
I updated to the 1.1 then 1.11 hotfix too and rebooted with no luck. I think I remember seeing someone else with the same problem, it was something to do with the permissions of the files...
I updated to the 1.1 then 1.11 hotfix too and rebooted with no luck. I think I remember seeing someone else with the same problem, it was something to do with the permissions of the files...
Cirrus SR20 pilot based out of YMMB - Moorabbin Airport, Victoria, Australia.
-
- Staff Sergeant
- Posts: 365
- Joined: 08 Apr 2010, 21:23
- Location: Norco, California
Re: P-47 accusim problems
Run the programs as admin, right click the P-47 /P-47Accu-sim along with the updates. Showld say something towards the bottom once right clicked on any of the programs, "Run as administrator" with a symbol of a blue and yellow shield. I have windows 7, I don't know what program your computer is running but hope this helps. Also after the flight, save the game with the switches ect . where you want them, reload FSX and see what happened's.JamieKugelmann wrote:Alright thanks.
I updated to the 1.1 then 1.11 hotfix too and rebooted with no luck. I think I remember seeing someone else with the same problem, it was something to do with the permissions of the files...
Re: P-47 accusim problems
I have just noticed the very same thing !!JamieKugelmann wrote:Lewis,
The thing is that there is no P47 .dat file created. All the other planes' accusim files show up in C:\Users\Jamie Kugelmann\Documents\A2A\FSX
Very strange..
I've got all of the other planes folders (B17, Feel, P40, P51, PiperJ3, Sptifire), but both the P47 and B377 don't have any folder...
EDIT: it seems the Accusim .DAT files for the P47 and the B377 are in the A2A folder that can be found in the FSX installation folder
- Lewis - A2A
- A2A Lieutenant Colonel
- Posts: 33321
- Joined: 06 Nov 2004, 23:22
- Location: Norfolk UK
- Contact:
Re: P-47 accusim problems
Thanks Daube,
I knew some of the older birds where in root FSX but couldnt remember if P-47 was one of them. Saves me checking when I get to the desktop in a bit
thanks,
Lewis
I knew some of the older birds where in root FSX but couldnt remember if P-47 was one of them. Saves me checking when I get to the desktop in a bit
thanks,
Lewis
A2A Facebook for news live to your social media newsfeed
A2A Youtube because a video can say a thousand screenshots,..
A2A Simulations Twitter for news live to your social media newsfeed
A2A Simulations Community Discord for voice/text chat
A2A Youtube because a video can say a thousand screenshots,..
A2A Simulations Twitter for news live to your social media newsfeed
A2A Simulations Community Discord for voice/text chat
-
- Senior Airman
- Posts: 141
- Joined: 06 Jun 2013, 01:23
- Location: Australia
Re: P-47 accusim problems
Cheers Daube!
I'll have a check today to see if its saving into there. Last time my airframe and engine hours would reset with a new flight.
I'll let you know.
I'll have a check today to see if its saving into there. Last time my airframe and engine hours would reset with a new flight.
I'll let you know.
Cirrus SR20 pilot based out of YMMB - Moorabbin Airport, Victoria, Australia.
-
- Airman First Class
- Posts: 50
- Joined: 06 Jan 2011, 02:22
- Location: Enterprise, AL
Re: P-47 accusim problems
I know this thread is a couple of years old, but I'm having the same issue that has been reported here. If you follow the conversation, I have done everything listed, i.e. reinstalled P-47 as administrator. I have also run the most recent update.
When I save in FSX, P-47 starts over pretty much as a new aircraft.
I found the DAT file in the A2A folder of Microsoft FSX. Is there something I need to do with this to make the P-47 save correctly?
Thanks for the help.
When I save in FSX, P-47 starts over pretty much as a new aircraft.
I found the DAT file in the A2A folder of Microsoft FSX. Is there something I need to do with this to make the P-47 save correctly?
Thanks for the help.
Who is online
Users browsing this forum: No registered users and 21 guests