The A2A Simulations Community

Hi James, this is in SeaVee's information, and it is what I use (did you see it?).

Some people also like to use the "Gunsight" key command (SHIFT+ Numpad Enter)[/color]. This command toggles on/off Vector Expansion and in effect makes it ALOT easier to keep the reticle centered in the gunsight. This is an invaluable command as it allows you to turn on or off Vector Expansion at will. I don't use it much but if you do frequently you may want to program a joystick button to this command.

I also have a couple of joystick buttons programmed to zoom in or out the FOV (CTRL+numpad Plus or Minus) and do this as needed.

_________________
Buddye

Intel I7 920 processor (2.66GHz, 8MB cache), 6GB DDR3 Triple Channel @1333MHz, 1.8GB NVIDIA GeForce GTX 295, Sound Blaster X-Fi PCI Sound Card, Windows 7 Home Premium 64 Bit , CH Fighter Stick & Pedals ,TrackIR4 Pro thanks to BobII crew.

yes, Jamesdietz,

Gunsight view = SHIFT+numpad Enter

_________________
i7 920 OC'd to 3.8Ghz; 12GB DDR3 RAM; ASRock 58X Deluxe mobo; GTX 570 SLI; Corsair HX850W PSU; XFi Titanium; 42” 1920X1080 LCD; MS FFB2; TIR 5 Pro; Logitech MX518 mouse; Logitech Z680; Buttkicker Gamer

Bloody Marvelous profile seavee thank you so much

Hope its working well for you. Make sure to try it in 'Precision' mode BTW.

_________________
i7 920 OC'd to 3.8Ghz; 12GB DDR3 RAM; ASRock 58X Deluxe mobo; GTX 570 SLI; Corsair HX850W PSU; XFi Titanium; 42” 1920X1080 LCD; MS FFB2; TIR 5 Pro; Logitech MX518 mouse; Logitech Z680; Buttkicker Gamer

Hey.

It seems that your profile is no longer available for download. Is there anywhere else I can get it?

Cheers.

_________________

Seems the link died because its been more than 30 days since the last download. Here is a new download link:

http://www.electronicfiles.net/files/19 ... rofile.zip

Once your download it just right-click the zip file and unzip the profile into (assumes you installed the TIR software to the default install location):

C:\Program Files\NaturalPoint\TrackIR4\Profiles

I'll update the link on the first post in this thread as well.

_________________
i7 920 OC'd to 3.8Ghz; 12GB DDR3 RAM; ASRock 58X Deluxe mobo; GTX 570 SLI; Corsair HX850W PSU; XFi Titanium; 42” 1920X1080 LCD; MS FFB2; TIR 5 Pro; Logitech MX518 mouse; Logitech Z680; Buttkicker Gamer

Many thanks SeaVee, you're an asset to this community.

_________________

I am glad to have SeeVee's TIR4 file for BoB2.
The only part I change is to the Hot Keys by setting them as ALT; CTR; SHF \.
Those key combinations are seemingly not used other wise.
When first using the file my heads flipped about until finding the right setup and printing pix of it for later info when reinstalling the system.
PS. seems I cannot change easily in SeeVee's new downloaded file for my new reinstallation so will accept his [; \ and ].

_________________

Joachim.
Hals und Bein Bruch,
Glider Pilot 1940 - 1942
Obergefreiter und Flugzeugfuehrer 1944[img]

Hi Joachim, good to see you back on here. I sent you a PM almost a month ago which you have not seen yet. You might want to check in your message folder for it .

_________________
Larry
E8400 Core2Duo 3 Ghz, 4 Gb DDR2 PC6400 RAM, GTX460 (1 Gb), Realtek HD O/B audio, XP Pro (SP3)
Saitek X52 HOTAS, Saitek Yoke/Throttle, Saitek Rudder Pedals, TIR 5 Pro, LG 22" WS LCD, B-K Gamer

Thanks Larry.
I have been very busy with setup/switching the single and the dual core cmptrs as well with other obligations (a sick wife as well).
Also noted my profile not setup to note PM's and have changed that.
Will look into Gliders soon.

_________________

Joachim.
Hals und Bein Bruch,
Glider Pilot 1940 - 1942
Obergefreiter und Flugzeugfuehrer 1944[img]

Does anyone else have trouble getting the guns to fire through the pip after a bunch of TIR movement? I'm finding I need to recenter often in a dogfight.

This may help. This is what I do for a set up but you may or may not like this. I have shift (on number pad) enter = shift enter to center the gunsight. i have that programmed on my hat switch. I do not check head bob in game option, leave "head bob" unchecked. I also programmed SeaVee's Track IR's commands, pause, center and precision hot keys on my throttle.

SeaVee's latest profile:

http://www.electronicfiles.net/files/19 ... %20NEW.zip

_________________
Barry

ASUS P5N32-E-SLI; Core2 Extreme QX6850(3GHz, 1333MHz FSB); 2xNVIDIA 8800 Ultra 768MB SLI; 2GB RAM PC6400 DDR2/800; Vista SP2; DX10; TIR5; mod MSFF2; Saitek Pro Flight - Quadrant, Pedals & Headset; TFS2; VAC; Dell 30"(2560x1600@60 hz)

Can anyone post a new link for Seavee's TrackIR profile?

Sorry, I do not have it right now (harddisk failure). Maybe someone else has it or SeaVee may be along in a few days as he checks in often.

_________________
Buddye

Intel I7 920 processor (2.66GHz, 8MB cache), 6GB DDR3 Triple Channel @1333MHz, 1.8GB NVIDIA GeForce GTX 295, Sound Blaster X-Fi PCI Sound Card, Windows 7 Home Premium 64 Bit , CH Fighter Stick & Pedals ,TrackIR4 Pro thanks to BobII crew.