My A2A FSUIPC for the guppy/pax b377

BIG, double-deck, four-engine, medium to long range, high altitude, high speed, commercial transport airplane
new reply
alan CXA651
Senior Master Sergeant
Posts: 2438
Joined: 15 Mar 2016, 08:23

My A2A FSUIPC for the guppy/pax b377

Post by alan CXA651 »

Hi.
This is my most recent FSUIPC mods , when you move throttles full back the props appear to go into reverse to slow you down , although the levers spring from full back to cutoff position , and you can move throttles fwd again to bring props back to the fine landing prop position.
This is the FSUIPC settings I have used for the guppy and pax , for my CH yoke/rudder peddles/2x quad throttle units , for anyone who wishies to try them feel free.

[Profile.A2A B377 Guppy]
1=Boeing 377 Pregnant Guppy, Paint 1

[Axes.A2A B377 Guppy]
RangeRepeatRate=10
0=0X,256,F,66387,0,0,0
1=0Y,256,F,66388,0,0,0
2=0Z,1,D,3,0,0,0
3=1Z,1,D,13,0,0,0
4=1R,1,D,14,0,0,0
5=1U,1,D,16,0,0,0
6=1V,1,D,15,0,0,0
7=2X,1,D,1,0,0,0
8=2Y,1,D,2,0,0,0
9=3X,1,D,9,0,0,0
10=3X,D,-16384,-15083,65966,0,65964,0
11=3Y,1,D,10,0,0,0
12=3Y,D,-16384,-15083,65971,0,65969,0
13=3Z,1,D,11,0,0,0
14=3Z,D,-16384,-15083,65976,0,65974,0
15=3R,1,D,12,0,0,0
16=3R,D,-16384,-15083,65981,1,65979,0
17=3V,1,F,66291,0,0,0
18=4X,1,D,21,0,0,0

[JoystickCalibration.A2A B377 Guppy]
AllowSuppressForPFCquad=Yes
ExcludeThrottleSet=No
ExcludeMixtureSet=No
ExcludePropPitchSet=No
SepRevsJetsOnly=No
ApplyHeloTrim=No
UseAxisControlsForNRZ=No
FlapsSetControl=0
FlapDetents=No
ReverserControl=66292
Reverser1Control=66422
Reverser2Control=66425
Reverser3Control=66428
Reverser4Control=66431
MaxThrottleForReverser=256
AileronTrimControl=66731
RudderTrimControl=66732
CowlFlaps1Control=66162
CowlFlaps2Control=66163
CowlFlaps3Control=66164
CowlFlaps4Control=66165
SteeringTillerControl=0
MaxSteerSpeed=60
Aileron=-16384,0,0,16256
SlopeAileron=3
Elevator=-16384,0,0,16000
SlopeElevator=4
Rudder=-16384,0,0,16256
SlopeRudder=3
LeftBrake=-16000,16384/16
RightBrake=-16256,16384/16
Throttle1=-16384,-15083,512,16383
Reverser=0,0
Throttle2=-16384,-15083,512,16383
Throttle3=-16384,-15083,512,16383
Throttle4=-16384,-15083,512,16383
MapMixture=Yes
ElevatorTrim=-16384,0,0,16383
PropPitch=-16384,16383


[Profile.A2A B377]
1=Boeing Stratocruiser, PAN AM
2=Boeing Stratocruiser, BOAC
3=Boeing Stratocruiser, AOA
4=Boeing Stratocruiser, NWA
5=Boeing Stratocruiser, Early BOAC
6=Boeing Stratocruiser, A2A

[Axes.A2A B377]
RangeRepeatRate=10
0=0X,256,F,66387,0,0,0
1=0Y,256,F,66388,0,0,0
2=0Z,1,D,3,0,0,0
3=1Z,1,D,13,0,0,0
4=1R,1,D,14,0,0,0
5=1U,1,D,16,0,0,0
6=1V,1,D,15,0,0,0
7=2X,1,D,1,0,0,0
8=2Y,1,D,2,0,0,0
9=3X,1,D,9,0,0,0
10=3X,D,-16384,-15083,65966,0,65964,0
11=3Y,1,D,10,0,0,0
12=3Y,D,-16384,-15083,65971,0,65969,0
13=3Z,1,D,11,0,0,0
14=3Z,D,-16384,-15083,65976,0,65974,0
15=3R,1,D,12,0,0,0
16=3R,D,-16384,-15083,65981,1,65979,0
17=3V,1,F,66291,0,0,0
18=4X,1,D,21,0,0,0

[JoystickCalibration.A2A B377]
AllowSuppressForPFCquad=Yes
ExcludeThrottleSet=No
ExcludeMixtureSet=No
ExcludePropPitchSet=No
SepRevsJetsOnly=No
ApplyHeloTrim=No
UseAxisControlsForNRZ=No
FlapsSetControl=0
FlapDetents=No
ReverserControl=66292
Reverser1Control=66422
Reverser2Control=66425
Reverser3Control=66428
Reverser4Control=66431
MaxThrottleForReverser=256
AileronTrimControl=66731
RudderTrimControl=66732
CowlFlaps1Control=66162
CowlFlaps2Control=66163
CowlFlaps3Control=66164
CowlFlaps4Control=66165
SteeringTillerControl=0
MaxSteerSpeed=60
Aileron=-16384,0,0,16256
SlopeAileron=3
Elevator=-16384,0,0,16000
SlopeElevator=3
Rudder=-16384,0,0,16256
SlopeRudder=3
LeftBrake=-16000,16384/16
RightBrake=-16256,16384/16
Throttle1=-16384,-15083,512,16383
Reverser=0,0
Throttle2=-16384,-15083,512,16383
Throttle3=-16384,-15083,512,16383
Throttle4=-16384,-15083,512,16383
MapMixture=Yes
ElevatorTrim=-16384,0,0,16383
PropPitch=-16384,16383

A2A CONFIGURATOR SETTINGS
Turbo Lever CH Throttle Quadrant USB XAxis invert
steering wheel CH Filght Sim Yoke USB XAxis (I.e. aileron moves steering as well)
Select Engine 1 Joystick:2:button:0
Select Engine 2 Joystick:2:button:2
Select Engine 3 Joystick:2:button:4
Select Engine 4 Joystick:2:button:6
Select All Engines Joystick:2:button:1
Engine Primer Joystick:2:button:3
Engine Start Joystick:2:button:5
Engine Boost Joystick:2:button:7
AP Turn Left Joystick:2:button:9
AP Turn Right Joystick:2:button:8
AP Pitch Up Joystick:2:button:10
AP Pitch Down Joystick:2:button:11

regards alan . 8)
Image
Image
Image
Image

User avatar
ThomasAH
Airman First Class
Posts: 60
Joined: 13 Jun 2016, 11:07

Re: My A2A FSUIPC for the guppy/pax b377

Post by ThomasAH »

Thank you for posting this!
I haven't used it yet, but I will transplant some parts of it into my configuration.

new reply

Return to “Boeing 377 Stratocruiser”

Who is online

Users browsing this forum: Majestic-12 [Bot] and 8 guests