Proper configs: Turbine Duke, Flight1 T182T, Carenado C185 T

[Dooga]

Hi, after copy-pasting light configs for the RealAir Turbine Duke, Flight1 T182T and Carenado C185 Tundra which were either not done very well (i.e. just the fx names replaced) or plain wrong (wrong names, half of the lights not working), here's configs for these three planes which work on my machine with latest versions of all involved software. The specific lights chosen are what I like best, ymmv.

RealAir Beechcraft Duke Turbine:
[LIGHTS]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing, 6=Taxi, 7=Recognition, 8=wing, 9=logo, 10=cabin
light.0 = 3, -6.40, -19.70, 1.01, fx_shockwave_navred
light.1 = 3, -6.40, 19.70, 1.01, fx_shockwave_navgre
light.2 = 3, -26.45, -0.06, 2.18, fx_shockwave_navwhi
light.3 = 3, -26.45, -0.06, 2.37, fx_shockwave_navwhi
light.4 = 2, -6.20, -19.66, 1.01, fx_shockwave_strobe_lowl
light.5 = 2, -6.20, 19.66, 1.01, fx_shockwave_strobe_lowl
light.6 = 1, -27.58, -0.06, 8.88, fx_shockwave_beaconh_lowl
light.7 = 7, -7.42, 1.944, -1.69, RASDukeT_Recogn
//light.7 = 7, -7.42, 1.944, -1.58, Fx_shockwave_beaconb_lowl
light.8 = 10, -7.80, 0.00, 1.50, fx_shockwave_vclight
light.9 = 8, -6.20, -13.20, 1.03, RASDukeT_wing //de-icing Boots left wing
light.10 = 8, -6.20, 13.20, 1.03, RASDukeT_wing //de-icing boots right wing

Flight1 Cessna T182T
[LIGHTS]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing, 6=taxi, 7=recognition, 8=wing, 9=logo, 10=cabin
light.0 =3, 0.631200, -17.654400, 2.613500, fx_shockwave_navred
light.1 =3, 0.631200, 17.654400, 2.613500, fx_shockwave_navgre
light.2 =2, -0.320000, -18.024700, 2.490000, fx_shockwave_strobe_2
light.3 =2, -0.320000, 18.024700, 2.490000, fx_shockwave_strobe_2
light.4 =3, -17.72, 0.0, 1.16, fx_shockwave_navwhi
light.5 =1, -17.86, -0.02, 6.59, fx_shockwave_beaconh_lowl
light.6 =10, 0.200000, 0.000000, 1.900000, fx_shockwave_vclight
light.7 =10, 2.000000, 0.000000, 1.900000, fx_shockwave_vclight_1
light.8 = 5, 1.6, -11.9, 2.4, fx_Shockwave_landing_light_small_xenon

Carenado Cessna C185 Tundra:
[LIGHTS]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing, 6=taxi
light.0 = 3, -4.80, -16.81, 3.34, fx_shockwave_navred
light.1 = 3, -4.80, 16.81, 3.36, fx_shockwave_navgre
light.2 = 3, -20.89, 0.0, 1.3, Fx_shockwave_navwhi
light.3 = 1, -18.37, 0.00, 6.5, Fx_shockwave_beaconh_lowl
light.4 = 10, -4.27, 0.0, 1.20, fx_vclightc185 //-3
light.5 = 10, -7.7, 0.0, 2.30, fx_vclightc1852
light.6 = 5, 4.0, -0.70, 0, fx_shockwave_landing_light_narrow
light.7 = 6, 4.0, 0.70, 0, Fx_shockwave_landing_light_sm_old

[Alky]

I've been hunting everywhere for the shockwave config for the Carenado C185! Thank you so much.
In desperation I was going to try and use the config from a C182 or C172 and try to make adjustments. I don't know if that would even work. Thank sir, you have saved my head from immeasurable hair loss!