FS2004 Kittyhawk/FFX B737-200 Captian Sim 727-100-200

[drmiller21]

Here is the shockwave light set up for Eric Cantu's FFX\737-200 model also the Captain Sim 727-100 and 200 for FS2004

I use this with the tinmouse panel from avsim. and Eric Cantu's FFX 737-200

[lights]

//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing

light.0 = 3, -11.50, -48.25, 3.00, Fx_shockwave_navred ,
light.1 = 3, -11.50, 48.25, 3.00, Fx_shockwave_navgre ,
light.2 = 3, -15.80, -47.80, 3.00, fx_navwhi ,
light.3 = 3, -15.80, 47.80, 3.00, fx_navwhi ,
light.4 = 2, -12.60, -48.45, 3.00, Fx_shockwave_strobe ,
light.5 = 2, -12.60, 48.45, 3.00, Fx_shockwave_strobe ,
light.6 = 3, -51.60, 0.00, 7.60, fx_navwhi ,
light.7 = 2, -51.60, 0.00, 7.60, Fx_shockwave_strobe ,
light.8 = 1, 7.75, 0.00, 11.10, Fx_shockwave_beacon ,
light.9 = 1, 0.00, 0.00, -3.20, Fx_shockwave_beacon ,
light.10 = 5, 14.55, -6.60, 2.90, fx_navwhi ,
light.11 = 5, 14.55, 6.60, 2.90, fx_navwhi ,
light.12 = 6, 40.0, 0.00, -4.3,
Fx_shockwave_landing_light_small_xenon ,
light.13 = 5, 13.50, -8.00, -0.00,
Fx_shockwave_landing_light_small_xenon ,
light.14 = 5, 13.50, 8.00, -0.00,
Fx_shockwave_landing_light_small_xenon

Add to your panel.cfg if it is not there ad this hole tag line
[Vcockpit01]
gauge00=shockwave_lights!SW Lights_taxi_gear, 1,1,1,1 //shockwave light
======================================================================
I have tested all the lights and switches all are working corectly

FS9 Captain Sim 727-100

[LIGHTS]
light.0 = 3, -27.59, -52.90, -2.49, Fx_shockwave_navred
light.1 = 3, -27.59, 52.90, -2.49, Fx_shockwave_navgre
light.2 = 3, -29.00, -53.40, -2.49, Fx_shockwave_navred
light.3 = 3, -29.00, 53.40, -2.49, Fx_shockwave_navgre
light.4 = 2, -33.50, -53.10, -2.50, fx_navwhih
light.5 = 2, -33.50, 53.10, -2.50, fx_navwhih
light.6 = 2, -28.25, -53.15, -2.49, Fx_shockwave_strobe
light.7 = 2, -28.25, 53.15, -2.49, Fx_shockwave_strobe
light.8 = 2, 23.40, 0.00, 7.20, Fx_shockwave_beacon
light.9 = 2, 1.05, 0.00, -7.20, Fx_shockwave_beacon
light.10 = 4, 50.00, -2.50, 0.70, cs727_vclight
light.11 = 4, 48.50, 0.00, 1.00, cs727_vclight
light.12 = 5, 9.50, 6.10, -2.90, Fx_shockwave_landing_light
light.13 = 5, 9.50, -6.10, -2.90, Fx_shockwave_landing_light
light.14 = 9, -20.00, -52.00, -4.50, cs727_voda
light.15 = 9, -20.00, 52.00, -4.50, cs727_voda
light.16 = 6, 43.7, 0.11, -9.5, fx_Shockwave_landing_light // Shockwave light

[VCockpit01]
gauge21=shockwave_lights!SW Lights, 1,1,1,1 //shockwave light
gauge22=shockwave_lights!SW Lights_taxi_gear, 1,1,1,1 //shockwave light

FS9 Captain Sim 727-200

[LIGHTS]
light.0 = 3, -27.59, -52.90, -2.49, Fx_shockwave_navred
light.1 = 3, -27.59, 52.90, -2.49, Fx_shockwave_navgre
light.2 = 3, -29.00, -53.40, -2.49, Fx_shockwave_navred
light.3 = 3, -29.00, 53.40, -2.49, Fx_shockwave_navgre
light.4 = 2, -33.50, -53.10, -2.50, fx_navwhih
light.5 = 2, -33.50, 53.10, -2.50, fx_navwhih
light.6 = 2, -28.25, -53.15, -2.49, Fx_shockwave_strobe_l
light.7 = 2, -28.25, 53.15, -2.49, Fx_shockwave_strobe_l
light.8 = 2, 35.00, 0.00, 7.20, Fx_shockwave_beacon_rotating_red
light.9 = 2, 1.05, 0.00, -7.20, Fx_shockwave_beacon_rotating_red
light.10 = 4, 60.00, -2.50, 0.70, cs727_vclight
light.11 = 4, 58.50, 0.00, 1.00, cs727_vclight
light.12 = 5, 9.50, 6.10, -2.90, Fx_shockwave_landing_light
light.13 = 5, 9.50, -6.10, -2.90, Fx_shockwave_landing_light
light.14 = 9, -20.00, -52.00, -4.50, cs727_voda
light.15 = 9, -20.00, 52.00, -4.50, cs727_voda
light.16 = 6, 53.7, 0.11, -8.5, fx_Shockwave_landing_light // Shockwave light

[VCockpit01]
gauge21=shockwave_lights!SW Lights, 1,1,1,1 //shockwave light
gauge22=shockwave_lights!SW Lights_taxi_gear, 1,1,1,1 //shockwave light

[bk2000]

Hello, Thanks for all the good work you have done with these lighting assignments.

The lights look great on the 727. One issue for me is that I cannot turn-off the landing and taxi lights with the cockpit switches. The only way to turn them off is to use the CNTL+L to get the landing lights to go off and use the L-key to get the taxilight to go off.
Any suggestions...?

ps: there a 2-nav lights on each side that appear to be lower than the wing. When I try to raise them up by altering the coordinates, seems to make some of the other lights appear out of wack...?

UPDATE: just too much hassle having to deal with them on the plane...hey?