CoolSky Super 80 Pro (Lights not showing)

Turn ON the LIGHTS for Microsoft FS9 / FSX with this all-new version of a great package
new reply
Seehawk98
Airman Basic
Posts: 1
Joined: 05 Jan 2008, 23:27
Location: United States

CoolSky Super 80 Pro (Lights not showing)

Post by Seehawk98 »

OK, I resolved the initial issue, which was my entire aircraft and all repaints vanished on install of the lights. Not sure how, but it worked.

Now, I have two issues that are significantly more minor (if anything on FSX short of a catastrophic loss could be classified as major). Issue #1 is that the wingtip landing lights flicker on and off when the gear are raised. I see that another user has had this issue with the Level D 767 as well, and am uncertain if this is just a normal A2A glitch or an FSX error. Issue #2 consists that the wingtip nav lights and other lights do not show. The logo lights, taxi lights, wingtip landing lights, and beacons show, but none of the wingtip lights, and the flood lights do not do it either. Below is the setup that I used (courtesy of another member of this forum:

[LIGHTS]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing, 6=taxi, 7=recognition, 8=wing, 9=logo
light.0 = 1, 1.15, 0.51, 9.32, fx_shockwave_beaconh_lowl // Red beacon above fuselage
light.1 = 1, -11.10, -0.15, -2.57, fx_shockwave_beaconb_lowl // Red beacon below fuselage
light.2 = 2, -18.63, -51.75, 1.74, fx_shockwave_strobe_sm_2_nl // left wingtip strobe (leading edge)
light.3 = 2, -17.93, 51.63, 1.74, fx_shockwave_strobe_sm_2_nl // right wingtip strobe (leading edge)
light.4 = 2, -21.60, -51.97, 1.73, fx_shockwave_strobe_sm_2_nl // left wingtip strobe (trailing edge)
light.5 = 2, -21.06, 51.84, 1.73, fx_shockwave_strobe_sm_2_nl // right wingtip strobe (trailing edge)
light.6 = 3, -18.18, -51.75, 1.74, fx_shockwave_navred // left wingtip red navlight (leading edge)
light.7 = 3, -18.08, 51.63, 1.74, fx_shockwave_navgre // right wingtip green navlight (leading edge)
light.8 = 3, -21.30, -51.93, 1.73, fx_shockwave_navwhi // left wingtip white navlight (trailing edge)
light.9 = 3, -21.06, 51.80, 1.73, fx_shockwave_navwhi // right wingtip white navlight (trailing edge)
light.10 = 3, 27.60, -4.90, 0.49, fx_shockwave_navwhi_l_old // Left ext. flood light
light.11 = 3, 27.20, 4.50, 0.51, fx_shockwave_navwhi_l_old // Right ext. flood light
light.12 = 4, 60.00, -1.20, 4.00, fx_S80Provclite1 // Cockpit lighting (original)
light.13 = 4, 60.00, 1.20, 4.00, fx_S80Provclite1 // Cockpit lighting (original)
light.14 = 5, -18.25, -50.75, 0.90, fx_shockwave_landing_light_narrow // left wingtip landing light
light.15 = 5, -18.25, 50.75, 0.90, fx_Shockwave_landing_light_narrow // right wingtip landing light
light.16 = 6, 65.00, 0.20, -2.90, fx_shockwave_landing_light_double_small // nosewheel taxi light
light.17 = 9, -56.30, -3.30, 13.20, fx_S80Prologo // left logo light
light.18 = 9, -56.30, 3.00, 13.20, fx_S80Prologo // right logo light

Thank you for your time in advance.
Jon

new reply

Return to “A2A Simulations 3D LIGHTS REDUX”

Who is online

Users browsing this forum: No registered users and 8 guests