Lights for Wilco A319

[Dene76]

Hi all,

I've searched the forum but cannot find what I need.

I'm looking for the full config for the Wilco Airbus A319, there's one on here for the A320 but I know that won't work because of the difference in sizes between the two aircraft.

Can anyone help?

[t4murphy]

Here the entire fleet posted several pages back:

Airbus 318.....

[LIGHTS]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing
light.0 =3, -15.80, -54.90, 3.34, fx_shockwave_navred ,
light.1 =3, -15.80, 54.90, 3.34, fx_shockwave_navgre ,
light.2 =2, -60.00, -0.0, 4.90, fx_shockwave_strobe_l_2 ,
light.3 =2, -16.54, -54.90, 3.34, fx_shockwave_strobe_l_2 ,
light.4 =2, -16.54, 54.90, 3.34, fx_shockwave_strobe_l_3 ,
light.5 =1, 3.00, -0.15, 8.50, fx_shockwave_beacon_rotating_red ,
//light.6 =3, -20.85, -47.23, 4.18, fx_navwhi ,
//light.7 =3, -20.85, 47.01, 4.18, fx_navwhi ,
light.8 =1, 2.50, -0.15, -5.00, fx_shockwave_beacon_rotating_red ,
light.9 = 5, 0.000, -7.3, -3.00, fx_Shockwave_landing_light // Shockwave light
light.10 = 5, 0.000, 7.3, -3.00, fx_Shockwave_landing_light // Shockwave light
light.11= 6, 27.200, -1.00, -4.85, fx_Shockwave_landing_light_small_xenon // Shockwave light


Airbus 319 both IAE and CFM and private jet(CJ)....

[LIGHTS]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing
light.0 =3, -15.80, -54.90, 3.34, fx_shockwave_navred ,
light.1 =3, -15.80, 54.90, 3.34, fx_shockwave_navgre ,
light.2 =2, -65.00, -0.0, 4.90,fx_shockwave_strobe_l_2,
light.3 =2, -16.54, -54.90, 3.34, fx_shockwave_strobe_l_2 ,
light.4 =2, -16.54, 54.90, 3.34, fx_shockwave_strobe_l_3 ,
light.5 =1, 3.00, -0.15, 8.50, fx_shockwave_beacon_rotating_red ,
//light.6 =3, -20.85, -47.23, 4.18, fx_navwhi ,
//light.7 =3, -20.85, 47.01, 4.18, fx_navwhi ,
light.8 =1, 2.50, -0.15, -5.00, fx_shockwave_beacon_rotating_red ,
light.9 = 5, -0.500, -7.3, -3.00, fx_Shockwave_landing_light // Shockwave light
light.10 = 5, -0.500, 7.3, -3.00, fx_Shockwave_landing_light // Shockwave light
light.11= 6, 30.300, -1.00, -4.85, fx_shockwave_landing_light_small_xenon // Shockwave light


Airbus 320CFM and IAE....

[LIGHTS]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing
light.0 =3, -15.80, -54.90, 3.34,fx_shockwave_navred ,
light.1 =3, -15.80, 54.90, 3.34, fx_shockwave_navgre ,
light.2 =2, -71.00, -0.0, 4.90,fx_shockwave_strobe_l_2 ,
light.3 =2, -16.54, -54.90, 3.34,fx_shockwave_strobe_l_2 ,
light.4 =2, -16.54, 54.90, 3.34, fx_shockwave_strobe_l_3,
light.5 =1, 3.00, -0.15, 8.50, fx_shockwave_beacon_rotating_red ,
//light.6 =3, -20.85, -47.23, 4.18, fx_navwhi ,
//light.7 =3, -20.85, 47.01, 4.18, fx_navwhi ,
light.8 =1, 2.50, -0.15, -5.00, fx_shockwave_beacon_rotating_red,
light.9 = 5, 0.000, -7.3, -3.00, fx_Shockwave_landing_light // Shockwave light
light.10 = 5, 0.000, 7.3, -3.00, fx_Shockwave_landing_light // Shockwave light
light.11 = 6, 35.000, -1.00, -4.80, fx_Shockwave_landing_light_small_xenon // Shockwave light


Airbus321CFM and IAE....

[LIGHTS]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing
light.0 =3, -15.80, -54.90, 3.34, fx_shockwave_navred ,
light.1 =3, -15.80, 54.90, 3.34, fx_shockwave_navgre ,
light.2 =2, -81.00, -0.0, 4.90, fx_shockwave_strobe_l_2,
light.3 =2, -16.54, -54.90, 3.34, fx_shockwave_strobe_l_2 ,
light.4 =2, -16.54, 54.90, 3.34, fx_shockwave_strobe_l_3 ,
light.5 =1, 3.00, -0.15, 8.50, fx_shockwave_beacon_rotating_red ,
//light.6 =3, -20.85, -47.23, 4.18, fx_navwhi ,
//light.7 =3, -20.85, 47.01, 4.18, fx_navwhi ,
light.8 =1, 2.50, -0.15, -5.00, fx_shockwave_beacon_rotating_red,
light.9 = 5, 0.000, -7.3, -3.00, fx_Shockwave_landing_light // Shockwave light
light.10 = 5, 0.000, 7.3, -3.00, fx_Shockwave_landing_light // Shockwave light
light.11= 6, 50.000, -1.00, -4.85, fx_Shockwave_landing_light_small_xenon // Shockwave light


For light.11 the taxi light you can use the, fx_Shockwave_landing_light_low, if you dont want the taxi light too bright.


Should work since I have been using this for some time