Hello all,
I am looking for help with the Shockwave lighting program to make some adjustment to their location. I am trying to understand the line program so I can move the lights up, down, forward and back. Here is what I understand now.
Example- Light.0=2,-18.60, -53.50, 5.75, fx_shockwave_strobe_1_2
LIGHT.0 = first, lighting position
2= the type of light to be displayed
-18.60 = forward, aft, up or down from a center point designated by the aircraft programmer
-53.50= forward, aft, up or down from a center point designated by the aircraft programmer
5.75 = forward, aft, up or down from a center point designated by the aircraft programmer
Fx_Shockwave= The program
_Strobe_1_2 = This is the Lighting effect
Is this correct? And is the forward, aft, up and down positions the right place to change the light position?
Thanks in advance
James
Light Editing
- Tako_Kichi
- BDG & A2A
- Posts: 2185
- Joined: 05 Jul 2006, 13:33
- Location: SW Ontario, Canada (ex-pat Brit)
Re: Light Editing
Hi James, you almost have the theory correct with the exception of the light position co-ordinates.
Have a look at this post where I explain what each item does.
http://www.a2asimulations.com/forum/vie ... 32&t=12748
That should get you up and running with a bit of luck.
Have a look at this post where I explain what each item does.
http://www.a2asimulations.com/forum/vie ... 32&t=12748
That should get you up and running with a bit of luck.
Larry
E8400 Core2Duo 3 Ghz, 4 Gb DDR2 PC6400 RAM, GTX460 (1 Gb), Realtek HD O/B audio, XP Pro (SP3)
Saitek X52 HOTAS, Saitek Yoke/Throttle, Saitek Rudder Pedals, TIR 5 Pro, LG 22" WS LCD, B-K Gamer
E8400 Core2Duo 3 Ghz, 4 Gb DDR2 PC6400 RAM, GTX460 (1 Gb), Realtek HD O/B audio, XP Pro (SP3)
Saitek X52 HOTAS, Saitek Yoke/Throttle, Saitek Rudder Pedals, TIR 5 Pro, LG 22" WS LCD, B-K Gamer
Who is online
Users browsing this forum: No registered users and 10 guests