Config request for DODOSIM FSX Bell 206

[JetRanger]

Has anyone worked on the new DODOSIM for FSX ?
Thanks !

[nath2889]

has any one done a better version of the nav light configuration making the brighter for the captain sim c130 yet

[Buzz313th]

Has anyone worked on the new DODOSIM for FSX ?
Thanks !

Here...

[LIGHTS]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit
light.0 = 3, -12.55, -3.78, 1.34, fx_shockwave_navred ,
light.1 = 3, -12.55, 3.78, 1.34, fx_shockwave_navgre ,
light.2 = 3, -21.55, 0.00, 1.85, fx_shockwave_navwhi ,
light.3 = 2, -21.18, 0.85, 5.95, fx_shockwave_beacon_fastflash ,
light.4 = 5, 9.0, 0.0, -1.8, fx_shockwave_landing_light_narrow_down_22 // ShockwaveLandingLightCone
light.5 = 6, 8.9, 0.0, -2.0, fx_shockwave_landing_light_narrow_down_45 // ShockwaveTaxiLightCone
light.6 = 5, 25.0, 0.0, -4.0, fx_shockwave_landing_light_light_sm // ShockwaveLandingLightAmbiance

[JetRanger]

Thanks !

[crazysundog]

Here is mine:

[LIGHTS]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit
light.0 = 3, -12.55, -3.78, 1.34, fx_shockwave_navred ,
light.1 = 3, -12.55, 3.78, 1.34, fx_shockwave_navgre ,
light.2 = 3, -21.55, 0.00, 1.85, fx_shockwave_navwhi ,
light.3 = 2, -21.23, 0.75, 5.9, fx_shockwave_strobe_nl ,
light.4 = 2, -21.23, 0.75, 5.9, fx_shockwave_navred ,
light.5 = 2, -0.65, 0.10, -2.3, fx_shockwave_beaconb_nl ,
light.6 = 4, 2.7, 0.25, 1.1, fx_shockwave_navred ,
light.7 = 5, 9.2, 0.0, -1.6, fx_shockwave_landing_light_narrow_old // Shockwave light
light.8 = 6, 8.8, 0.0, -2.2, fx_shockwave_landing_light_narrow_down_22 // ShockwaveTaxiLightCone
light.9 = 5, 25.0, 0.0, -4.0, fx_shockwave_landing_light_light // ShockwaveLandingLightAmbiance

**note** I placed a navred light on the tail beacon, and a strobe_nl at the exact same spot to simulate the flash. I placed a beacon on the belly of the Dodo behind the hook, but I primarily use the Utility version so if you dont like it remove light.5 and renumber the following lights. I also placed a navred in the cabin, to simulate a red filter on the light for night-ops; if you dont want that i suggest you change it to fx_vclight.