Hi.
Forgot one thing in my post above . All aircraft files are for FS2004.
Best regards, Albert Vermeule
3rd Party Aircraft Config Database HERE
- AlphaWhiskeyFoxtrot
- Airman First Class
- Posts: 88
- Joined: 04 Sep 2007, 12:20
- Location: New York, New York
- Contact:
FSX:
AlphaSim Kamov Ka-50 "Black Shark"
-Conrad
AlphaSim Kamov Ka-50 "Black Shark"
Code: Select all
[lights]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing
light.0= 3, -0.903, -11.806, -0.609, fx_shockwave_navred ; Nav left
light.1= 3, -0.903, 11.806, -0.609, fx_shockwave_navgre ; Nav right
light.2 = 1, -4.626, -0.002, 2.232, fx_shockwave_beacon_h ; Beacon upper
light.3 = 1, -1.042, -1.387, -4.357, fx_shockwave_beacon_l ; Beacon lower
light.4 = 4, 9.435, 0.00, -0.565, fx_ALPHA_Ka50_vclight ; vc
light.5 = 4, 10.472, 1.857, -1.269, fx_ALPHA_Ka50_vclight ; vc
light.6 = 4, 10.666, 0.00, 3.029, fx_ALPHA_Ka50_vclight ; vc
light.7 = 5, 4.8, -0.8, -3.92, fx_shockwave_landing_light_small_xenon ;Landing light
light.8 = 5, 10.0, -0.8, -5.5, fx_shockwave_landing_light_light ;Landing light
light.9 = 6, 6.0, -2.0, -3.92, fx_shockwave_landing_light_l ;Taxi light
Code: Select all
[VCockpit01]
gauge11=shockwave_lights!SW Lights, 1,1,1,1 //shockwave light
gauge12=shockwave_lights!SW Lights_taxi_gear, 1,1,1,1 //shockwave light
Tower: "...and for your information, you were slightly to the left of the centerline on that approach."
Speedbird: "That's correct; and, my First Officer was slightly to the right"
BostonVirtualATC.com
Speedbird: "That's correct; and, my First Officer was slightly to the right"
BostonVirtualATC.com
- AlphaWhiskeyFoxtrot
- Airman First Class
- Posts: 88
- Joined: 04 Sep 2007, 12:20
- Location: New York, New York
- Contact:
FSX:
AlphaSim F-105 'Thud'
AlphaSim F-105 'Thud'
Code: Select all
[lights]
light.0 = 3, -8.96, -16.47, 0.65, fx_shockwave_navred
light.1 = 3, -8.96, 16.47, 0.65, fx_shockwave_navgre
light.2 = 3, -25.68, 0.20, 11.50, fx_shockwave_navwhi_l_nl
light.3 = 3, -25.68, -0.20, 11.50, fx_shockwave_navwhi_l_nl
light.4 =10, 0.00, 0.00, 4.10, fx_shockwave_beaconb
light.5 = 4, 16.67, 0.00, 2.81, fx_shockwave_vclight_l // fx_ALPHA_F105_vclight_Red
light.6 = 2, -16.40, 0.00, 0.35, fx_ALPHA_F105_exh1
light.7 = 1, -16.40, 0.00, 0.35, fx_ALPHA_F105_exh
light.8= 9, -16.40, 0.00, 0.35, fx_ALPHA_F105_AB
light.9= 8, 6.20, 0.00, 2.05, fx_ALPHA_F105_Vapour
light.10 = 5, 18.92, 0.12, -5.99, fx_Shockwave_landing_light // Shockwave light
light.11 = 5, 18.92, -0.12, -5.99, fx_Shockwave_landing_light // Shockwave light
light.12 = 5, -1.50, -8.65, -1.33, fx_Shockwave_landing_light // Shockwave light,
light.13 = 5, 3.50, -8.0, -1.33, fx_Shockwave_landing_light_light // Shockwave light,
light.14 = 5, 20.0, 0.0, -3.0, fx_Shockwave_landing_light_light // Shockwave light
Code: Select all
[VCockpit01]
gauge32=shockwave_lights!SW Lights_gear, 1,1,1,1
Tower: "...and for your information, you were slightly to the left of the centerline on that approach."
Speedbird: "That's correct; and, my First Officer was slightly to the right"
BostonVirtualATC.com
Speedbird: "That's correct; and, my First Officer was slightly to the right"
BostonVirtualATC.com
Re: 3rd Party Aircraft Config Database HERE
For the PMDG FSX 747
1.- installed 3D Redux
2.- I added PMDG 747 fsx
Do i need to run again the instalation program of the 3 d lights and after that add the CFG. files? or i only add the new files without running again the installer?
1.- installed 3D Redux
2.- I added PMDG 747 fsx
Do i need to run again the instalation program of the 3 d lights and after that add the CFG. files? or i only add the new files without running again the installer?
Re: 3rd Party Aircraft Config Database HERE
Hello
Here are a few other settings for some Rick Piper's planes (FS2004):
- Hawker Siddeley HS.748
- Hawker Siddeley HS.780 Andover C1
- de Havilland Canada DHC-1 Chipmunk
I also configured the beautiful Milton Shupe's Aero Commander 520, so I also included my settings for this plane at the end of the post (FS2004 too).
Hawker Siddeley - HS.748
Aprimatic
Here are a few other settings for some Rick Piper's planes (FS2004):
- Hawker Siddeley HS.748
- Hawker Siddeley HS.780 Andover C1
- de Havilland Canada DHC-1 Chipmunk
I also configured the beautiful Milton Shupe's Aero Commander 520, so I also included my settings for this plane at the end of the post (FS2004 too).
Hawker Siddeley - HS.748
Hawker Siddeley - HS.780 Andover C1[LIGHTS]
light.0=1, -34.095, 0.00, 16.55, HS748_beacon ,
light.1=1, -0.91, 0.00, -5.026, HS748_beacon ,
light.2=7, 17.99, 0.0, 0.8, HS748_Vclightred.fx,
light.3=9, 17.99, 0.0, 1.3, HS748_Vclightwhi.fx,
light.4=10, 2.0, 0.0, 1.0, HS748_cabinlight ,
light.5=10, -4.8, 0.0, 1.0, HS748_cabinlight ,
light.6=10, -13.0, 0.0, 1.0, HS748_cabinlight ,
light.7=8, 4.7, -32.0, 0.0, HS748_icelight ,
light.8=8, 4.7, 32.0, 0.0, HS748_icelight ,
light.9=5, -1.8, 45.381, 0.373, HS748_land ,
light.10=5, -1.8, -45.381, 0.373, HS748_land ,
light.11=5, -1.3, 45.381, 0.373, Fx_shockwave_landing_light_small_xenon,
light.12=5, -1.3, -45.381, 0.373, Fx_shockwave_landing_light_small_xenon,
light.13=5, 3.5, 13.8, -2.9, fx_shockwave_landing_light_narrow,
light.14=5, 3.5, -13.8, -2.9, fx_shockwave_landing_light_narrow,
De Havilland Chipmunk[LIGHTS]
light.0=1, -42.13, 0.00, 21.35, HS748_beacon ,
light.1=1, -0.91, 0.00, -5.026, HS748_beacon ,
light.2=7, 17.99, 0.0, 0.8, HS748_Vclightred.fx,
light.3=9, 17.99, 0.0, 1.3, HS748_Vclightwhi.fx,
light.4=10, 2.0, 0.0, 1.0, HS748_cabinlight ,
light.5=10, -4.8, 0.0, 1.0, HS748_cabinlight ,
light.6=10, -13.0, 0.0, 1.0, HS748_cabinlight ,
light.7=8, 4.7, -32.0, 0.0, HS748_icelight ,
light.8=8, 4.7, 32.0, 0.0, HS748_icelight ,
light.9=5, -1.8, 45.381, 0.373, HS748_land ,
light.10=5, -1.8, -45.381, 0.373, HS748_land ,
light.11=5, -1.3, 45.381, 0.373, Fx_shockwave_landing_light_small_xenon,
light.12=5, -1.3, -45.381, 0.373, Fx_shockwave_landing_light_small_xenon,
Aero Commander 520[LIGHTS]
light.1=4, -0.40, 0.00, 2.30, fx_vclight_chipmunk,
light.2=4, -2.75., 0.00, 2.20, fx_vclight_chipmunk,
light.3=3, 0.499, -16.733, -0.806, fx_navred_chipmunk,
light.4=3, 0.499, 16.733, -0.806, fx_navgre_chipmunk,
light.5=3, -17.792, 0.0, 0.059, fx_navwhi_chipmunk,
light.6=5, 1.6, -4.0, -3.6, fx_shockwave_landing_light_narrow_no_flare
Best regards[LIGHTS]
light.0=3, 0.95, -22.6, 1.85, fx_shockwave_navred,
light.1=3, 0.94, 22.6, 1.82, fx_shockwave_navgre,
light.4=1, -18.65, 0.0, 9.5, fx_shockwave_beacon,
light.5=1, -1.1, 0.0, -4.5, fx_beacon_commander.fx ,
light.6=4, 1.50, 0.0, 0.0, fx_vclight,
light.8=3, -23.4, -0.0, 1.0, fx_shockwave_navwhi,
light.9=5, 12.50, -1.15, -3.00, fx_shockwave_landing_light_narrow_no_flare ,
light.10=5, 12.50, 1.15, -3.00, fx_shockwave_landing_light_narrow_no_flare ,
Aprimatic
Re: 3rd Party Aircraft Config Database HERE
Hi - Here are nice effects for the Nemeth EC-135
Don't forget to put this in all THREE panels!!
gaugeXX=shockwave_lights!SW Lights, 1,1,1,1 //shockwave light
[LIGHTS]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing, 6=taxi, 7=recognition, 8=wing, 9=logo,
10=cabin
light.0 = 3, -15.05, -4.19, 1.00, Fx_shockwave_navred ,
light.1 = 3, -15.05, 4.36, 1.00, Fx_shockwave_navgre ,
light.2 = 3, -23.62, -0.19, 7.02, fx_navwhi ,
light.3 = 1, -21.48, -0.13, 7.25, Fx_shockwave_beacon_h ,
light.4 = 2, -15.05, -4.19, 1.00, Fx_shockwave_strobe ,
light.5 = 2, -15.05, 4.36, 1.00, Fx_shockwave_strobe ,
light.6 = 10, -16.00, 0.00, 6.00, Fx_shockwave_vclight ,
light.7 = 6, +10.50, 0.00, -0.50, Fx_shockwave_landing_light_small_xenon ,
light.8 = 5, +8.00, -1.00, -2.50, Fx_shockwave_landing_light_small_xenon ,
Regards
GJ
Don't forget to put this in all THREE panels!!
gaugeXX=shockwave_lights!SW Lights, 1,1,1,1 //shockwave light
[LIGHTS]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing, 6=taxi, 7=recognition, 8=wing, 9=logo,
10=cabin
light.0 = 3, -15.05, -4.19, 1.00, Fx_shockwave_navred ,
light.1 = 3, -15.05, 4.36, 1.00, Fx_shockwave_navgre ,
light.2 = 3, -23.62, -0.19, 7.02, fx_navwhi ,
light.3 = 1, -21.48, -0.13, 7.25, Fx_shockwave_beacon_h ,
light.4 = 2, -15.05, -4.19, 1.00, Fx_shockwave_strobe ,
light.5 = 2, -15.05, 4.36, 1.00, Fx_shockwave_strobe ,
light.6 = 10, -16.00, 0.00, 6.00, Fx_shockwave_vclight ,
light.7 = 6, +10.50, 0.00, -0.50, Fx_shockwave_landing_light_small_xenon ,
light.8 = 5, +8.00, -1.00, -2.50, Fx_shockwave_landing_light_small_xenon ,
Regards
GJ
Re: 3rd Party Aircraft Config Database HERE
Hello,
I like un-synced strobes, and these planes use them... Feel free to try and comment...
Here's my version of the AOPA C177
[LIGHTS]
//Types:
//1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing,
//6=taxi, 7=recognition, 8=wing, 9=logo, 10=cabin
light.0 = 3, 00.063, -17.807, 00.577, fx_shockwave_navred
light.1 = 3, 00.063, 17.807, 00.577, fx_shockwave_navgre
light.2 = 1, -15.523, 00.000, 03.867, fx_shockwave_beaconh
light.3 = 2, -00.340, -17.828, 00.563, fx_shockwave_strobe
light.4 = 2, -01.000, 17.828, 00.563, fx_shockwave_strobe_2
light.5 = 4, 00.150, 00.000, -01.500, fx_shockwave_vclight
light.6 = 6, 7.700, 00.1020, -3.750, fx_shockwave_landing_light_small
light.7 = 5, 7.700, -00.1020, -3.750, fx_Shockwave_landing_light
panel.cfg
gauge31=shockwave_lights!SW Lights, 1,1,1,1 //shockwave light
and, my version of the PMDG 1900 C.
[LIGHTS]
//Types: 1=beacon, 2=strobe, 3=navigation, 5=landing 9=logo
light.0 = 3, -22.902, -27.500, 1.500, fx_navred_pmdg1900 , //Nav Left
light.1 = 3, -22.702, -27.250, 1.472, fx_navred_pmdg1900 , //Nav Left
light.2 = 3, -22.902, 27.500, 1.500, fx_navgre_pmdg1900 , //Nav Right
light.3 = 3, -22.702, 27.250, 1.472, fx_navgre_pmdg1900 , //Nav Right
light.4 = 1, -28.900, 0.000, -1.800, fx_shockwave_beacon_rotating_red, //Beacon Bottom
light.5 = 1, -28.900, 0.000, -1.800, fx_beacon_pmdg_b1900, //Beacon Bottom
light.6 = 2, -22.902, -27.500, 1.500, fx_shockwave_strobe_l_3 , //Strobe Left
light.7 = 2, -22.902, 27.500, 1.500, fx_shockwave_strobe_l_3 , //Strobe Right
light.8 = 7, -55.650, 0.000, 9.050, fx_navwhi , //Position Rear
light.9 = 1, -51.750, 0.000, 9.500, fx_shockwave_beacon_rotating_red , //Beacon Rear Top
light.10 = 1, -51.750, 0.000, 9.500, fx_beacon_pmdg_b1900, //Beacon Rear Top
light.11 = 9, -54.000, -2.500, 6.648, fx_pmdglogo1900, //Logo Light Tail
light.12 = 9, -54.000, 2.500, 6.648, fx_pmdglogo1900, //Logo Light Tail
light.13 = 8, -18.902, -18.500, 1.500, fx_pmdglogo1900, //Wing Left
light.14 = 8, -18.902, 18.500, 1.500, fx_pmdglogo1900, //Wing Right
light.15 = 5, -20.000, 10.00, 0.000, fx_Shockwave_landing_light // Shockwave light
light.16 = 5, -20.000, -10.00, 0.000, fx_Shockwave_landing_light // Shockwave light
light.17 = 6, 0.000, 0.00, -2.000, fx_Shockwave_taxi_light // Shockwave light
in the panel.vc folder, you will find the panel.cfg that needs to be modded in the vcockpit01 section...
gauge46=shockwave_lights!SW Lights, 1,1,1,1 //shockwave light
gauge47=shockwave_lights!SW Lights_taxi_gear, 1,1,1,1 //shockwave light
I like un-synced strobes, and these planes use them... Feel free to try and comment...
Here's my version of the AOPA C177
[LIGHTS]
//Types:
//1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing,
//6=taxi, 7=recognition, 8=wing, 9=logo, 10=cabin
light.0 = 3, 00.063, -17.807, 00.577, fx_shockwave_navred
light.1 = 3, 00.063, 17.807, 00.577, fx_shockwave_navgre
light.2 = 1, -15.523, 00.000, 03.867, fx_shockwave_beaconh
light.3 = 2, -00.340, -17.828, 00.563, fx_shockwave_strobe
light.4 = 2, -01.000, 17.828, 00.563, fx_shockwave_strobe_2
light.5 = 4, 00.150, 00.000, -01.500, fx_shockwave_vclight
light.6 = 6, 7.700, 00.1020, -3.750, fx_shockwave_landing_light_small
light.7 = 5, 7.700, -00.1020, -3.750, fx_Shockwave_landing_light
panel.cfg
gauge31=shockwave_lights!SW Lights, 1,1,1,1 //shockwave light
and, my version of the PMDG 1900 C.
[LIGHTS]
//Types: 1=beacon, 2=strobe, 3=navigation, 5=landing 9=logo
light.0 = 3, -22.902, -27.500, 1.500, fx_navred_pmdg1900 , //Nav Left
light.1 = 3, -22.702, -27.250, 1.472, fx_navred_pmdg1900 , //Nav Left
light.2 = 3, -22.902, 27.500, 1.500, fx_navgre_pmdg1900 , //Nav Right
light.3 = 3, -22.702, 27.250, 1.472, fx_navgre_pmdg1900 , //Nav Right
light.4 = 1, -28.900, 0.000, -1.800, fx_shockwave_beacon_rotating_red, //Beacon Bottom
light.5 = 1, -28.900, 0.000, -1.800, fx_beacon_pmdg_b1900, //Beacon Bottom
light.6 = 2, -22.902, -27.500, 1.500, fx_shockwave_strobe_l_3 , //Strobe Left
light.7 = 2, -22.902, 27.500, 1.500, fx_shockwave_strobe_l_3 , //Strobe Right
light.8 = 7, -55.650, 0.000, 9.050, fx_navwhi , //Position Rear
light.9 = 1, -51.750, 0.000, 9.500, fx_shockwave_beacon_rotating_red , //Beacon Rear Top
light.10 = 1, -51.750, 0.000, 9.500, fx_beacon_pmdg_b1900, //Beacon Rear Top
light.11 = 9, -54.000, -2.500, 6.648, fx_pmdglogo1900, //Logo Light Tail
light.12 = 9, -54.000, 2.500, 6.648, fx_pmdglogo1900, //Logo Light Tail
light.13 = 8, -18.902, -18.500, 1.500, fx_pmdglogo1900, //Wing Left
light.14 = 8, -18.902, 18.500, 1.500, fx_pmdglogo1900, //Wing Right
light.15 = 5, -20.000, 10.00, 0.000, fx_Shockwave_landing_light // Shockwave light
light.16 = 5, -20.000, -10.00, 0.000, fx_Shockwave_landing_light // Shockwave light
light.17 = 6, 0.000, 0.00, -2.000, fx_Shockwave_taxi_light // Shockwave light
in the panel.vc folder, you will find the panel.cfg that needs to be modded in the vcockpit01 section...
gauge46=shockwave_lights!SW Lights, 1,1,1,1 //shockwave light
gauge47=shockwave_lights!SW Lights_taxi_gear, 1,1,1,1 //shockwave light
-
- Airman
- Posts: 12
- Joined: 17 Dec 2007, 15:06
Re: 3rd Party Aircraft Config Database HERE
For aerosoft's FSX dhc-6 twin otter ver. 1.11
Add this to both panel config's in folder Aerosoft Twin Otter 300:[/size]
And these for float versions:
[/size]
And these for wheel and ski models:
[/size]
These coordinates were not created by me. I have only compiled these from various sources, which had only part of the coordinates in each source
Add this to both panel config's in folder Aerosoft Twin Otter 300:
Code: Select all
gauge29=shockwave_lights!SW Lights, 1,1,1,1 //shockwave light
And these for float versions:
Code: Select all
light.0 = 3, -00.0, -32.5, 00.80, fx_shockwave_navred,
light.1 = 2, -00.0, -32.6, 00.80, fx_shockwave_strobe_2,
light.2 = 3, -00.0, 32.5, 00.80, fx_shockwave_navgre,
light.3 = 2, -00.0, 32.6, 00.80, fx_shockwave_strobe_3,
light.4 = 1, -28.6, 00.0, 09.30, fx_shockwave_beaconh,
light.5 = 4, -6.50, 0.0, -1.64, Aerosoft_Twotter_VC_Cabin,
light.6 = 4, -1.50, 0.0, -1.64, Aerosoft_Twotter_VC_Cabin,
light.7 = 4, 2.50, 0.0, -1.64, Aerosoft_Twotter_VC_Cabin,
light.8 = 4, 7.00, 0.0, -2.0, Aerosoft_Twotter_VC_Cabin,
light.9 = 4, 8.00, 1.7, -2.0, Aerosoft_Twotter_VC_Cabin,
light.10 = 4, 8.00, -1.7, -2.0, Aerosoft_Twotter_VC_Cabin,
light.11 = 5, 02.5, -11.6, -00.10, fx_shockwave_landing_light,
light.12 = 5, 02.5, 11.6, -00.10, fx_shockwave_landing_light,
And these for wheel and ski models:
Code: Select all
light.0 = 3, -00.0, -32.5, 00.80, fx_shockwave_navred,
light.1 = 2, -00.0, -32.6, 00.80, fx_shockwave_strobe_2,
light.2 = 3, -00.0, 32.5, 00.80, fx_shockwave_navgre,
light.3 = 2, -00.0, 32.6, 00.80, fx_shockwave_strobe_3,
light.4 = 1, -28.6, 00.0, 09.30, fx_shockwave_beaconh,
light.5 = 4, -6.50, 0.0, -1.64, Aerosoft_Twotter_VC_Cabin,
light.6 = 4, -1.50, 0.0, -1.64, Aerosoft_Twotter_VC_Cabin,
light.7 = 4, 2.50, 0.0, -1.64, Aerosoft_Twotter_VC_Cabin,
light.8 = 4, 7.00, 0.0, -2.0, Aerosoft_Twotter_VC_Cabin,
light.9 = 4, 8.00, 1.7, -2.0, Aerosoft_Twotter_VC_Cabin,
light.10 = 4, 8.00, -1.7, -2.0, Aerosoft_Twotter_VC_Cabin,
light.11 = 5, 02.5, -11.6, -00.10, fx_shockwave_landing_light,
light.12 = 5, 02.5, 11.6, -00.10, fx_shockwave_landing_light,
light.13 = 6, 13.3, -00.7, -07.66, fx_shockwave_landing_light_narrow
These coordinates were not created by me. I have only compiled these from various sources, which had only part of the coordinates in each source
-
- Airman
- Posts: 33
- Joined: 18 Mar 2008, 21:53
- Location: ICAO code=KBTV
- Contact:
Re: 3rd Party Aircraft Config Database HERE
Does anyone know the coordinates for the newly released PMDG md-11? If not I will try my best, but I'm terrible at that stuff
Sad to see fs-mp go, but happy to have been in it.
Better to have loved and lost, then to have never loved at all.
Better to have loved and lost, then to have never loved at all.
Re: 3rd Party Aircraft Config Database HERE
Bush hawk from aerosoft
Just the taildragger at this time.
[LIGHTS]
//Types: 1=Beacon 2=Strobe 3=Navigation or Position 4=Cockpit 5=Landing 6=Taxi 7=Recog 8=Wing 9=Logo 10=Cabin
light.0 = 4, 0.00, 0.00, 3.00, fx_shockwave_vclight
light.1 = 5, 1.35, 10.85, 3.65, Fx_shockwave_landing_light ,
light.2 = 6, 1.45, 10.95, 3.65, Fx_shockwave_landing_light_narrow ,
light.3 = 3, 0.92, 17.82, 3.75, fx_shockwave_navgre ,
light.4 = 3, 0.85, -17.82, 3.75, fx_shockwave_navred ,
light.5 = 2, 0.68, 18.00, 3.75, fx_shockwave_strobe ,
light.6 = 2, 0.62, -18.00, 3.75, fx_shockwave_strobe_2 ,
Just the taildragger at this time.
[LIGHTS]
//Types: 1=Beacon 2=Strobe 3=Navigation or Position 4=Cockpit 5=Landing 6=Taxi 7=Recog 8=Wing 9=Logo 10=Cabin
light.0 = 4, 0.00, 0.00, 3.00, fx_shockwave_vclight
light.1 = 5, 1.35, 10.85, 3.65, Fx_shockwave_landing_light ,
light.2 = 6, 1.45, 10.95, 3.65, Fx_shockwave_landing_light_narrow ,
light.3 = 3, 0.92, 17.82, 3.75, fx_shockwave_navgre ,
light.4 = 3, 0.85, -17.82, 3.75, fx_shockwave_navred ,
light.5 = 2, 0.68, 18.00, 3.75, fx_shockwave_strobe ,
light.6 = 2, 0.62, -18.00, 3.75, fx_shockwave_strobe_2 ,
-
- Airman Basic
- Posts: 1
- Joined: 06 Nov 2008, 14:54
Re: Milton Shupe's Dash 7 for FS9
PANEL.CFG
//--------------------------------------------------------
[Vcockpit01]
Background_color=0,0,0
visible=1
gauge00=shockwave_lights!SW Lights, 1,1,1,1 //shockwave light
gauge01=shockwave_lights!SW Lights_taxi_gear, 1,1,1,1 //shockwave light
AIRCRAFT.CFG
[LIGHTS]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit
light.0=3, -1.9, -46.4, 8.7, fx_navred ,
light.1=3, -1.9, 46.3, 8.7, fx_navgre ,
light.2=2, -2.3, 46.3, 8.7, fx_strobeh ,
light.3=2, -2.3, -46.4, 8.7, fx_strobeh ,
light.4=1, -43.4, 0.2, 22.2, fx_beacon ,
light.5=1, 5.3, 0.0, -2.8, fx_beacon ,
light.6=4, 21.50, 0.0, 4.5, Fx_D7cbn2 ,
light.7=4, 9.00, 0.0, 2.0, Fx_D7cbn3 ,
light.8=4, 4.00, 0.0, 2.0, Fx_D7cbn1 ,
light.9=4, 0.00, 0.0, 2.0, Fx_D7cbn3 ,
light.10=4, -4.00, 0.0, 2.0, Fx_D7cbn1 ,
light.11=4, -9.00, 0.0, 2.0, Fx_D7cbn3 ,
light.12=4, -16.00, -1.0, 1.5, Fx_D7cbn2 ,
light.13=3, -46.3, 0.1, 6.3, fx_navwhi ,
//Wing Landing Lights
light.14 = 5, 0.750,-34.500, 7.750, fx_Shockwave_landing_light // Shockwave light
light.15 = 5, 0.750, 33.500, 7.750, fx_Shockwave_landing_light // Shockwave light
//Mounted Landing Lights
light.16 = 5, -2.500,-31.000, 6.250, fx_shockwave_landing_light_narrow_down_22 // Shockwave light
light.17 = 5, -2.500, 31.000, 6.250, fx_shockwave_landing_light_narrow_down_22 // Shockwave light
//Nose Gear Taxi Light
light.18 = 6, 23.000, 0.000, -3.250, fx_shockwave_landing_light_double // Shockwave light
These seemed to look correct. I changed the inboard landing lights to 22* down for effect. If you don't like it
just change them to fx_Shockwave_landing_light ... Also, the left wing landing light appears to be not symetrical
to the right landing light. Notice the position coordinate difference? Maybe my eyes are bad but they seem to line
up to the aircraft landing lights better this way. Try it. If I'm out to lunch let me know here.
//--------------------------------------------------------
[Vcockpit01]
Background_color=0,0,0
visible=1
gauge00=shockwave_lights!SW Lights, 1,1,1,1 //shockwave light
gauge01=shockwave_lights!SW Lights_taxi_gear, 1,1,1,1 //shockwave light
AIRCRAFT.CFG
[LIGHTS]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit
light.0=3, -1.9, -46.4, 8.7, fx_navred ,
light.1=3, -1.9, 46.3, 8.7, fx_navgre ,
light.2=2, -2.3, 46.3, 8.7, fx_strobeh ,
light.3=2, -2.3, -46.4, 8.7, fx_strobeh ,
light.4=1, -43.4, 0.2, 22.2, fx_beacon ,
light.5=1, 5.3, 0.0, -2.8, fx_beacon ,
light.6=4, 21.50, 0.0, 4.5, Fx_D7cbn2 ,
light.7=4, 9.00, 0.0, 2.0, Fx_D7cbn3 ,
light.8=4, 4.00, 0.0, 2.0, Fx_D7cbn1 ,
light.9=4, 0.00, 0.0, 2.0, Fx_D7cbn3 ,
light.10=4, -4.00, 0.0, 2.0, Fx_D7cbn1 ,
light.11=4, -9.00, 0.0, 2.0, Fx_D7cbn3 ,
light.12=4, -16.00, -1.0, 1.5, Fx_D7cbn2 ,
light.13=3, -46.3, 0.1, 6.3, fx_navwhi ,
//Wing Landing Lights
light.14 = 5, 0.750,-34.500, 7.750, fx_Shockwave_landing_light // Shockwave light
light.15 = 5, 0.750, 33.500, 7.750, fx_Shockwave_landing_light // Shockwave light
//Mounted Landing Lights
light.16 = 5, -2.500,-31.000, 6.250, fx_shockwave_landing_light_narrow_down_22 // Shockwave light
light.17 = 5, -2.500, 31.000, 6.250, fx_shockwave_landing_light_narrow_down_22 // Shockwave light
//Nose Gear Taxi Light
light.18 = 6, 23.000, 0.000, -3.250, fx_shockwave_landing_light_double // Shockwave light
These seemed to look correct. I changed the inboard landing lights to 22* down for effect. If you don't like it
just change them to fx_Shockwave_landing_light ... Also, the left wing landing light appears to be not symetrical
to the right landing light. Notice the position coordinate difference? Maybe my eyes are bad but they seem to line
up to the aircraft landing lights better this way. Try it. If I'm out to lunch let me know here.
Re: 3rd Party Aircraft Config Database HERE
Here ya go for the BAe146-300
[lights]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing
light.0 = 3, 1, -43, 2.5, fx_shockwave_navred ,
light.1 = 3, 1, 43, 2.5, fx_shockwave_navgre ,
light.2 = 2, -44.5, 0.00, 3.4, fx_shockwave_strobe_sm_nl ,
light.3 = 2, 0, -43, 2.5, fx_shockwave_strobe_sm_nl ,
light.4 = 2, 0, 43, 2.5, fx_shockwave_strobe_sm_nl ,
light.5 = 1, 13.5, 0.00, 7, fx_shockwave_beacon_fastflash ,
light.6 = 1, 8.8, -2.3, -6.5, fx_shockwave_beacon_fastflash ,
light.7 = 4, 42.0, 0.00, 1.102, fx_vclighth,
light.8 = 5, 11.50, -17.70, 4.10, fx_shockwave_landing_light_narrow // landing light
light.9 = 5, 11.50, 17.70, 4.10, fx_shockwave_landing_light_narrow // landing light
light.10 = 5, 18.50, -5.30, 4.70, fx_shockwave_landing_light_narrow_down // landing light
light.11 = 5, 18.50, 5.30, 4.70, fx_shockwave_landing_light_narrow_down // landing light
light.12 = 6, 45.00, 0.00, -6.00, fx_shockwave_landing_light_low
Bill
[lights]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing
light.0 = 3, 1, -43, 2.5, fx_shockwave_navred ,
light.1 = 3, 1, 43, 2.5, fx_shockwave_navgre ,
light.2 = 2, -44.5, 0.00, 3.4, fx_shockwave_strobe_sm_nl ,
light.3 = 2, 0, -43, 2.5, fx_shockwave_strobe_sm_nl ,
light.4 = 2, 0, 43, 2.5, fx_shockwave_strobe_sm_nl ,
light.5 = 1, 13.5, 0.00, 7, fx_shockwave_beacon_fastflash ,
light.6 = 1, 8.8, -2.3, -6.5, fx_shockwave_beacon_fastflash ,
light.7 = 4, 42.0, 0.00, 1.102, fx_vclighth,
light.8 = 5, 11.50, -17.70, 4.10, fx_shockwave_landing_light_narrow // landing light
light.9 = 5, 11.50, 17.70, 4.10, fx_shockwave_landing_light_narrow // landing light
light.10 = 5, 18.50, -5.30, 4.70, fx_shockwave_landing_light_narrow_down // landing light
light.11 = 5, 18.50, 5.30, 4.70, fx_shockwave_landing_light_narrow_down // landing light
light.12 = 6, 45.00, 0.00, -6.00, fx_shockwave_landing_light_low
Bill
Win XP Pro
Intel Dual Core E2180 2.0 OC to 2.30mhz
Corsair 2gig DDR2 667 (Dual channel)
(AGP) Sapphire Radeon X1950Pro 512MB GDDR3
ASRock 4CoreDual-SATA2 Mobo
Maxtor SATA 200gig 8MB Buffer 7200 HD
ANTEC True Blue 480W PS
Intel Dual Core E2180 2.0 OC to 2.30mhz
Corsair 2gig DDR2 667 (Dual channel)
(AGP) Sapphire Radeon X1950Pro 512MB GDDR3
ASRock 4CoreDual-SATA2 Mobo
Maxtor SATA 200gig 8MB Buffer 7200 HD
ANTEC True Blue 480W PS
-
- Airman Basic
- Posts: 5
- Joined: 14 Nov 2008, 12:57
Re: 3rd Party Aircraft Config Database HERE
I am not getting how to configue CLS A310, B747-200/300 please can anyone guide me for it ?
-
- Airman Basic
- Posts: 1
- Joined: 28 Nov 2008, 09:44
Re: 3rd Party Aircraft Config Database HERE
Hi there,
I'm using this great add on. But i found that when using the right lines in my aircraft.cfg and Panel.cfg, that the red beacon light
on top of the 747 is not on the right place. it is to much forward.
It is for the PMDG 747-400F. I tried to google and search here on the forum, but did not find anything.
Is there a way to fix this?
Thx. and keep up the great work.
Peter
I'm using this great add on. But i found that when using the right lines in my aircraft.cfg and Panel.cfg, that the red beacon light
on top of the 747 is not on the right place. it is to much forward.
It is for the PMDG 747-400F. I tried to google and search here on the forum, but did not find anything.
Is there a way to fix this?
Thx. and keep up the great work.
Peter
-
- Airman Basic
- Posts: 3
- Joined: 28 Nov 2008, 00:25
Re: 3rd Party Aircraft Config Database HERE
Can someone please post a Panel.cfg and aircraft.cfg for the Flight1 Super 80 Classic for FSX
Send a PM when you do thanks.
Send a PM when you do thanks.
Who is online
Users browsing this forum: No registered users and 5 guests