3rd Party Aircraft Config Database HERE

Turn ON the LIGHTS for Microsoft FS9 / FSX with this all-new version of a great package
Ban Ryder
Airman Basic
Posts: 2
Joined: 29 Jul 2008, 08:08

Post by Ban Ryder »

Hi.

Forgot one thing in my post above . All aircraft files are for FS2004.

Best regards, Albert Vermeule

User avatar
AlphaWhiskeyFoxtrot
Airman First Class
Posts: 88
Joined: 04 Sep 2007, 12:20
Location: New York, New York
Contact:

Post by AlphaWhiskeyFoxtrot »

FSX:
AlphaSim Kamov Ka-50 "Black Shark"

Code: Select all

[lights]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing
light.0=  3, -0.903, -11.806, -0.609,  fx_shockwave_navred  ; Nav left
light.1=  3, -0.903,  11.806, -0.609,  fx_shockwave_navgre ; Nav right
light.2 = 1, -4.626,  -0.002,  2.232,   fx_shockwave_beacon_h  ; Beacon upper
light.3 = 1, -1.042,  -1.387,  -4.357,  fx_shockwave_beacon_l  ; Beacon lower
light.4 = 4, 9.435,   0.00,  -0.565,  fx_ALPHA_Ka50_vclight    ; vc
light.5 = 4, 10.472,   1.857,  -1.269,  fx_ALPHA_Ka50_vclight    ; vc
light.6 = 4, 10.666,   0.00,  3.029,  fx_ALPHA_Ka50_vclight    ; vc
light.7 = 5, 4.8,     -0.8,   -3.92,   fx_shockwave_landing_light_small_xenon  ;Landing light
light.8 = 5, 10.0,     -0.8,   -5.5,   fx_shockwave_landing_light_light  ;Landing light
light.9 = 6, 6.0,     -2.0,   -3.92,   fx_shockwave_landing_light_l  ;Taxi light

Code: Select all

[VCockpit01]
gauge11=shockwave_lights!SW Lights, 1,1,1,1 //shockwave light
gauge12=shockwave_lights!SW Lights_taxi_gear, 1,1,1,1 //shockwave light
-Conrad
Tower: "...and for your information, you were slightly to the left of the centerline on that approach."
Speedbird: "That's correct; and, my First Officer was slightly to the right"

BostonVirtualATC.com

User avatar
AlphaWhiskeyFoxtrot
Airman First Class
Posts: 88
Joined: 04 Sep 2007, 12:20
Location: New York, New York
Contact:

Post by AlphaWhiskeyFoxtrot »

FSX:
AlphaSim F-105 'Thud'

Code: Select all

[lights]                               

light.0 = 3, -8.96, -16.47, 0.65, fx_shockwave_navred 
light.1 = 3, -8.96, 16.47, 0.65, fx_shockwave_navgre 
light.2 = 3, -25.68, 0.20, 11.50, fx_shockwave_navwhi_l_nl 
light.3 = 3, -25.68, -0.20, 11.50, fx_shockwave_navwhi_l_nl 
light.4 =10, 0.00, 0.00, 4.10, fx_shockwave_beaconb 
light.5 = 4, 16.67, 0.00, 2.81, fx_shockwave_vclight_l // fx_ALPHA_F105_vclight_Red 
light.6 = 2, -16.40, 0.00, 0.35, fx_ALPHA_F105_exh1 
light.7 = 1, -16.40, 0.00, 0.35, fx_ALPHA_F105_exh 
light.8= 9, -16.40, 0.00, 0.35, fx_ALPHA_F105_AB 
light.9= 8, 6.20, 0.00, 2.05, fx_ALPHA_F105_Vapour 
light.10 = 5, 18.92, 0.12, -5.99, fx_Shockwave_landing_light // Shockwave light 
light.11 = 5, 18.92, -0.12, -5.99, fx_Shockwave_landing_light // Shockwave light 
light.12 = 5, -1.50, -8.65, -1.33, fx_Shockwave_landing_light // Shockwave light, 
light.13 = 5, 3.50, -8.0, -1.33, fx_Shockwave_landing_light_light // Shockwave light, 
light.14 = 5, 20.0, 0.0, -3.0, fx_Shockwave_landing_light_light // Shockwave light 

Code: Select all

[VCockpit01]
gauge32=shockwave_lights!SW Lights_gear, 1,1,1,1 
Tower: "...and for your information, you were slightly to the left of the centerline on that approach."
Speedbird: "That's correct; and, my First Officer was slightly to the right"

BostonVirtualATC.com

sobaya
Airman Basic
Posts: 2
Joined: 06 Dec 2007, 20:10

Re: 3rd Party Aircraft Config Database HERE

Post by sobaya »

For the PMDG FSX 747

1.- installed 3D Redux

2.- I added PMDG 747 fsx

Do i need to run again the instalation program of the 3 d lights and after that add the CFG. files? or i only add the new files without running again the installer?

aprimatic
Airman Basic
Posts: 5
Joined: 25 Feb 2008, 04:23

Re: 3rd Party Aircraft Config Database HERE

Post by aprimatic »

Hello

Here are a few other settings for some Rick Piper's planes (FS2004):
- Hawker Siddeley HS.748
- Hawker Siddeley HS.780 Andover C1
- de Havilland Canada DHC-1 Chipmunk

I also configured the beautiful Milton Shupe's Aero Commander 520, so I also included my settings for this plane at the end of the post (FS2004 too).

Hawker Siddeley - HS.748
[LIGHTS]
light.0=1, -34.095, 0.00, 16.55, HS748_beacon ,
light.1=1, -0.91, 0.00, -5.026, HS748_beacon ,
light.2=7, 17.99, 0.0, 0.8, HS748_Vclightred.fx,
light.3=9, 17.99, 0.0, 1.3, HS748_Vclightwhi.fx,
light.4=10, 2.0, 0.0, 1.0, HS748_cabinlight ,
light.5=10, -4.8, 0.0, 1.0, HS748_cabinlight ,
light.6=10, -13.0, 0.0, 1.0, HS748_cabinlight ,
light.7=8, 4.7, -32.0, 0.0, HS748_icelight ,
light.8=8, 4.7, 32.0, 0.0, HS748_icelight ,
light.9=5, -1.8, 45.381, 0.373, HS748_land ,
light.10=5, -1.8, -45.381, 0.373, HS748_land ,
light.11=5, -1.3, 45.381, 0.373, Fx_shockwave_landing_light_small_xenon,
light.12=5, -1.3, -45.381, 0.373, Fx_shockwave_landing_light_small_xenon,
light.13=5, 3.5, 13.8, -2.9, fx_shockwave_landing_light_narrow,
light.14=5, 3.5, -13.8, -2.9, fx_shockwave_landing_light_narrow,
Hawker Siddeley - HS.780 Andover C1
[LIGHTS]
light.0=1, -42.13, 0.00, 21.35, HS748_beacon ,
light.1=1, -0.91, 0.00, -5.026, HS748_beacon ,
light.2=7, 17.99, 0.0, 0.8, HS748_Vclightred.fx,
light.3=9, 17.99, 0.0, 1.3, HS748_Vclightwhi.fx,
light.4=10, 2.0, 0.0, 1.0, HS748_cabinlight ,
light.5=10, -4.8, 0.0, 1.0, HS748_cabinlight ,
light.6=10, -13.0, 0.0, 1.0, HS748_cabinlight ,
light.7=8, 4.7, -32.0, 0.0, HS748_icelight ,
light.8=8, 4.7, 32.0, 0.0, HS748_icelight ,
light.9=5, -1.8, 45.381, 0.373, HS748_land ,
light.10=5, -1.8, -45.381, 0.373, HS748_land ,
light.11=5, -1.3, 45.381, 0.373, Fx_shockwave_landing_light_small_xenon,
light.12=5, -1.3, -45.381, 0.373, Fx_shockwave_landing_light_small_xenon,
De Havilland Chipmunk
[LIGHTS]
light.1=4, -0.40, 0.00, 2.30, fx_vclight_chipmunk,
light.2=4, -2.75., 0.00, 2.20, fx_vclight_chipmunk,
light.3=3, 0.499, -16.733, -0.806, fx_navred_chipmunk,
light.4=3, 0.499, 16.733, -0.806, fx_navgre_chipmunk,
light.5=3, -17.792, 0.0, 0.059, fx_navwhi_chipmunk,
light.6=5, 1.6, -4.0, -3.6, fx_shockwave_landing_light_narrow_no_flare
Aero Commander 520
[LIGHTS]
light.0=3, 0.95, -22.6, 1.85, fx_shockwave_navred,
light.1=3, 0.94, 22.6, 1.82, fx_shockwave_navgre,
light.4=1, -18.65, 0.0, 9.5, fx_shockwave_beacon,
light.5=1, -1.1, 0.0, -4.5, fx_beacon_commander.fx ,
light.6=4, 1.50, 0.0, 0.0, fx_vclight,
light.8=3, -23.4, -0.0, 1.0, fx_shockwave_navwhi,
light.9=5, 12.50, -1.15, -3.00, fx_shockwave_landing_light_narrow_no_flare ,
light.10=5, 12.50, 1.15, -3.00, fx_shockwave_landing_light_narrow_no_flare ,
Best regards

Aprimatic

GAJIT
Airman
Posts: 31
Joined: 11 Sep 2008, 03:07

Re: 3rd Party Aircraft Config Database HERE

Post by GAJIT »

Hi - Here are nice effects for the Nemeth EC-135

Don't forget to put this in all THREE panels!!

gaugeXX=shockwave_lights!SW Lights, 1,1,1,1 //shockwave light


[LIGHTS]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing, 6=taxi, 7=recognition, 8=wing, 9=logo,

10=cabin
light.0 = 3, -15.05, -4.19, 1.00, Fx_shockwave_navred ,
light.1 = 3, -15.05, 4.36, 1.00, Fx_shockwave_navgre ,
light.2 = 3, -23.62, -0.19, 7.02, fx_navwhi ,
light.3 = 1, -21.48, -0.13, 7.25, Fx_shockwave_beacon_h ,
light.4 = 2, -15.05, -4.19, 1.00, Fx_shockwave_strobe ,
light.5 = 2, -15.05, 4.36, 1.00, Fx_shockwave_strobe ,
light.6 = 10, -16.00, 0.00, 6.00, Fx_shockwave_vclight ,
light.7 = 6, +10.50, 0.00, -0.50, Fx_shockwave_landing_light_small_xenon ,
light.8 = 5, +8.00, -1.00, -2.50, Fx_shockwave_landing_light_small_xenon ,


Regards

GJ

ssanchez
Airman
Posts: 13
Joined: 12 Sep 2008, 10:09

Re: 3rd Party Aircraft Config Database HERE

Post by ssanchez »

Hello,

I like un-synced strobes, and these planes use them... Feel free to try and comment...

Here's my version of the AOPA C177

[LIGHTS]
//Types:
//1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing,
//6=taxi, 7=recognition, 8=wing, 9=logo, 10=cabin
light.0 = 3, 00.063, -17.807, 00.577, fx_shockwave_navred
light.1 = 3, 00.063, 17.807, 00.577, fx_shockwave_navgre
light.2 = 1, -15.523, 00.000, 03.867, fx_shockwave_beaconh
light.3 = 2, -00.340, -17.828, 00.563, fx_shockwave_strobe
light.4 = 2, -01.000, 17.828, 00.563, fx_shockwave_strobe_2
light.5 = 4, 00.150, 00.000, -01.500, fx_shockwave_vclight
light.6 = 6, 7.700, 00.1020, -3.750, fx_shockwave_landing_light_small
light.7 = 5, 7.700, -00.1020, -3.750, fx_Shockwave_landing_light

panel.cfg
gauge31=shockwave_lights!SW Lights, 1,1,1,1 //shockwave light

and, my version of the PMDG 1900 C.

[LIGHTS]
//Types: 1=beacon, 2=strobe, 3=navigation, 5=landing 9=logo
light.0 = 3, -22.902, -27.500, 1.500, fx_navred_pmdg1900 , //Nav Left
light.1 = 3, -22.702, -27.250, 1.472, fx_navred_pmdg1900 , //Nav Left
light.2 = 3, -22.902, 27.500, 1.500, fx_navgre_pmdg1900 , //Nav Right
light.3 = 3, -22.702, 27.250, 1.472, fx_navgre_pmdg1900 , //Nav Right
light.4 = 1, -28.900, 0.000, -1.800, fx_shockwave_beacon_rotating_red, //Beacon Bottom
light.5 = 1, -28.900, 0.000, -1.800, fx_beacon_pmdg_b1900, //Beacon Bottom
light.6 = 2, -22.902, -27.500, 1.500, fx_shockwave_strobe_l_3 , //Strobe Left
light.7 = 2, -22.902, 27.500, 1.500, fx_shockwave_strobe_l_3 , //Strobe Right
light.8 = 7, -55.650, 0.000, 9.050, fx_navwhi , //Position Rear
light.9 = 1, -51.750, 0.000, 9.500, fx_shockwave_beacon_rotating_red , //Beacon Rear Top
light.10 = 1, -51.750, 0.000, 9.500, fx_beacon_pmdg_b1900, //Beacon Rear Top
light.11 = 9, -54.000, -2.500, 6.648, fx_pmdglogo1900, //Logo Light Tail
light.12 = 9, -54.000, 2.500, 6.648, fx_pmdglogo1900, //Logo Light Tail
light.13 = 8, -18.902, -18.500, 1.500, fx_pmdglogo1900, //Wing Left
light.14 = 8, -18.902, 18.500, 1.500, fx_pmdglogo1900, //Wing Right
light.15 = 5, -20.000, 10.00, 0.000, fx_Shockwave_landing_light // Shockwave light
light.16 = 5, -20.000, -10.00, 0.000, fx_Shockwave_landing_light // Shockwave light
light.17 = 6, 0.000, 0.00, -2.000, fx_Shockwave_taxi_light // Shockwave light

in the panel.vc folder, you will find the panel.cfg that needs to be modded in the vcockpit01 section...

gauge46=shockwave_lights!SW Lights, 1,1,1,1 //shockwave light
gauge47=shockwave_lights!SW Lights_taxi_gear, 1,1,1,1 //shockwave light

warbird861
Airman
Posts: 12
Joined: 17 Dec 2007, 15:06

Re: 3rd Party Aircraft Config Database HERE

Post by warbird861 »

For aerosoft's FSX dhc-6 twin otter ver. 1.11

Add this to both panel config's in folder Aerosoft Twin Otter 300:

Code: Select all

gauge29=shockwave_lights!SW Lights, 1,1,1,1 //shockwave light 
[/size]

And these for float versions:

Code: Select all

light.0 = 3, -00.0, -32.5, 00.80, fx_shockwave_navred, 
light.1 = 2, -00.0, -32.6, 00.80, fx_shockwave_strobe_2, 
light.2 = 3, -00.0, 32.5, 00.80, fx_shockwave_navgre, 
light.3 = 2, -00.0, 32.6, 00.80, fx_shockwave_strobe_3, 
light.4 = 1, -28.6, 00.0, 09.30, fx_shockwave_beaconh, 
light.5 = 4,   -6.50,  0.0,  -1.64, Aerosoft_Twotter_VC_Cabin,
light.6 = 4,   -1.50,  0.0,  -1.64, Aerosoft_Twotter_VC_Cabin,
light.7 = 4,    2.50,  0.0,  -1.64, Aerosoft_Twotter_VC_Cabin,
light.8 = 4,    7.00,  0.0,  -2.0, Aerosoft_Twotter_VC_Cabin,
light.9 = 4,    8.00,  1.7,  -2.0, Aerosoft_Twotter_VC_Cabin,
light.10 = 4,   8.00,  -1.7,  -2.0, Aerosoft_Twotter_VC_Cabin,
light.11 = 5, 02.5, -11.6, -00.10, fx_shockwave_landing_light, 
light.12 = 5, 02.5, 11.6, -00.10, fx_shockwave_landing_light, 
[/size]

And these for wheel and ski models:

Code: Select all

light.0 = 3, -00.0, -32.5, 00.80, fx_shockwave_navred, 
light.1 = 2, -00.0, -32.6, 00.80, fx_shockwave_strobe_2, 
light.2 = 3, -00.0, 32.5, 00.80, fx_shockwave_navgre, 
light.3 = 2, -00.0, 32.6, 00.80, fx_shockwave_strobe_3, 
light.4 = 1, -28.6, 00.0, 09.30, fx_shockwave_beaconh, 
light.5 = 4,   -6.50,  0.0,  -1.64, Aerosoft_Twotter_VC_Cabin,
light.6 = 4,   -1.50,  0.0,  -1.64, Aerosoft_Twotter_VC_Cabin,
light.7 = 4,    2.50,  0.0,  -1.64, Aerosoft_Twotter_VC_Cabin,
light.8 = 4,    7.00,  0.0,  -2.0, Aerosoft_Twotter_VC_Cabin,
light.9 = 4,    8.00,  1.7,  -2.0, Aerosoft_Twotter_VC_Cabin,
light.10 = 4,   8.00,  -1.7,  -2.0, Aerosoft_Twotter_VC_Cabin,
light.11 = 5, 02.5, -11.6, -00.10, fx_shockwave_landing_light, 
light.12 = 5, 02.5, 11.6, -00.10, fx_shockwave_landing_light, 
light.13 = 6, 13.3, -00.7, -07.66, fx_shockwave_landing_light_narrow 
[/size]

These coordinates were not created by me. I have only compiled these from various sources, which had only part of the coordinates in each source

cheeseman123
Airman
Posts: 33
Joined: 18 Mar 2008, 21:53
Location: ICAO code=KBTV
Contact:

Re: 3rd Party Aircraft Config Database HERE

Post by cheeseman123 »

Does anyone know the coordinates for the newly released PMDG md-11? If not I will try my best, but I'm terrible at that stuff :)
Sad to see fs-mp go, but happy to have been in it.

Better to have loved and lost, then to have never loved at all.

wyldmagik
Airman Basic
Posts: 9
Joined: 12 May 2007, 06:55

Re: 3rd Party Aircraft Config Database HERE

Post by wyldmagik »

Bush hawk from aerosoft

Just the taildragger at this time.

[LIGHTS]
//Types: 1=Beacon 2=Strobe 3=Navigation or Position 4=Cockpit 5=Landing 6=Taxi 7=Recog 8=Wing 9=Logo 10=Cabin

light.0 = 4, 0.00, 0.00, 3.00, fx_shockwave_vclight
light.1 = 5, 1.35, 10.85, 3.65, Fx_shockwave_landing_light ,
light.2 = 6, 1.45, 10.95, 3.65, Fx_shockwave_landing_light_narrow ,
light.3 = 3, 0.92, 17.82, 3.75, fx_shockwave_navgre ,
light.4 = 3, 0.85, -17.82, 3.75, fx_shockwave_navred ,
light.5 = 2, 0.68, 18.00, 3.75, fx_shockwave_strobe ,
light.6 = 2, 0.62, -18.00, 3.75, fx_shockwave_strobe_2 ,

Speedbird YCG
Airman Basic
Posts: 1
Joined: 06 Nov 2008, 14:54

Re: Milton Shupe's Dash 7 for FS9

Post by Speedbird YCG »

PANEL.CFG

//--------------------------------------------------------
[Vcockpit01]
Background_color=0,0,0
visible=1

gauge00=shockwave_lights!SW Lights, 1,1,1,1 //shockwave light
gauge01=shockwave_lights!SW Lights_taxi_gear, 1,1,1,1 //shockwave light


AIRCRAFT.CFG

[LIGHTS]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit
light.0=3, -1.9, -46.4, 8.7, fx_navred ,
light.1=3, -1.9, 46.3, 8.7, fx_navgre ,
light.2=2, -2.3, 46.3, 8.7, fx_strobeh ,
light.3=2, -2.3, -46.4, 8.7, fx_strobeh ,
light.4=1, -43.4, 0.2, 22.2, fx_beacon ,
light.5=1, 5.3, 0.0, -2.8, fx_beacon ,
light.6=4, 21.50, 0.0, 4.5, Fx_D7cbn2 ,
light.7=4, 9.00, 0.0, 2.0, Fx_D7cbn3 ,
light.8=4, 4.00, 0.0, 2.0, Fx_D7cbn1 ,
light.9=4, 0.00, 0.0, 2.0, Fx_D7cbn3 ,
light.10=4, -4.00, 0.0, 2.0, Fx_D7cbn1 ,
light.11=4, -9.00, 0.0, 2.0, Fx_D7cbn3 ,
light.12=4, -16.00, -1.0, 1.5, Fx_D7cbn2 ,
light.13=3, -46.3, 0.1, 6.3, fx_navwhi ,
//Wing Landing Lights
light.14 = 5, 0.750,-34.500, 7.750, fx_Shockwave_landing_light // Shockwave light
light.15 = 5, 0.750, 33.500, 7.750, fx_Shockwave_landing_light // Shockwave light
//Mounted Landing Lights
light.16 = 5, -2.500,-31.000, 6.250, fx_shockwave_landing_light_narrow_down_22 // Shockwave light
light.17 = 5, -2.500, 31.000, 6.250, fx_shockwave_landing_light_narrow_down_22 // Shockwave light
//Nose Gear Taxi Light
light.18 = 6, 23.000, 0.000, -3.250, fx_shockwave_landing_light_double // Shockwave light

These seemed to look correct. I changed the inboard landing lights to 22* down for effect. If you don't like it
just change them to fx_Shockwave_landing_light ... Also, the left wing landing light appears to be not symetrical
to the right landing light. Notice the position coordinate difference? Maybe my eyes are bad but they seem to line
up to the aircraft landing lights better this way. Try it. If I'm out to lunch let me know here. :lol:

BillA
Airman First Class
Posts: 77
Joined: 25 Feb 2008, 18:11
Location: Idaho, USA

Re: 3rd Party Aircraft Config Database HERE

Post by BillA »

Here ya go for the BAe146-300

[lights]

//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing

light.0 = 3, 1, -43, 2.5, fx_shockwave_navred ,
light.1 = 3, 1, 43, 2.5, fx_shockwave_navgre ,
light.2 = 2, -44.5, 0.00, 3.4, fx_shockwave_strobe_sm_nl ,
light.3 = 2, 0, -43, 2.5, fx_shockwave_strobe_sm_nl ,
light.4 = 2, 0, 43, 2.5, fx_shockwave_strobe_sm_nl ,
light.5 = 1, 13.5, 0.00, 7, fx_shockwave_beacon_fastflash ,
light.6 = 1, 8.8, -2.3, -6.5, fx_shockwave_beacon_fastflash ,
light.7 = 4, 42.0, 0.00, 1.102, fx_vclighth,
light.8 = 5, 11.50, -17.70, 4.10, fx_shockwave_landing_light_narrow // landing light
light.9 = 5, 11.50, 17.70, 4.10, fx_shockwave_landing_light_narrow // landing light
light.10 = 5, 18.50, -5.30, 4.70, fx_shockwave_landing_light_narrow_down // landing light
light.11 = 5, 18.50, 5.30, 4.70, fx_shockwave_landing_light_narrow_down // landing light
light.12 = 6, 45.00, 0.00, -6.00, fx_shockwave_landing_light_low



Bill
Win XP Pro
Intel Dual Core E2180 2.0 OC to 2.30mhz
Corsair 2gig DDR2 667 (Dual channel)
(AGP) Sapphire Radeon X1950Pro 512MB GDDR3
ASRock 4CoreDual-SATA2 Mobo
Maxtor SATA 200gig 8MB Buffer 7200 HD
ANTEC True Blue 480W PS

ahmedshaikhani
Airman Basic
Posts: 5
Joined: 14 Nov 2008, 12:57

Re: 3rd Party Aircraft Config Database HERE

Post by ahmedshaikhani »

I am not getting how to configue CLS A310, B747-200/300 please can anyone guide me for it ?

Peertje767
Airman Basic
Posts: 1
Joined: 28 Nov 2008, 09:44

Re: 3rd Party Aircraft Config Database HERE

Post by Peertje767 »

Hi there,

I'm using this great add on. But i found that when using the right lines in my aircraft.cfg and Panel.cfg, that the red beacon light
on top of the 747 is not on the right place. it is to much forward.

It is for the PMDG 747-400F. I tried to google and search here on the forum, but did not find anything.

Is there a way to fix this?

Thx. and keep up the great work.

Peter

ChiFlyer80
Airman Basic
Posts: 3
Joined: 28 Nov 2008, 00:25

Re: 3rd Party Aircraft Config Database HERE

Post by ChiFlyer80 »

Can someone please post a Panel.cfg and aircraft.cfg for the Flight1 Super 80 Classic for FSX


Send a PM when you do thanks.

new reply

Return to “A2A Simulations 3D LIGHTS REDUX”

Who is online

Users browsing this forum: No registered users and 7 guests