Hello to all and thanks for this great plane!
Few years i use in every VC my gauge complet ( Nav1, nav2, adf,autopilot etc)
But now in A2A V35 i don't know which gauge is nav, adf etc so please tell me.
In panel cfg i have this entries:
[Vcockpit00]
Background_color=0,0,0
size_mm=1024,1024
visible=1
pixel_size=1024,1024 //1024,1024
texture=$display
gauge01=A2A_Bonanza35!code_Bonanza35_1, 1,1,1,1
gauge02=A2A_Bonanza35!status1,3,3,3,3
gauge03=A2A_Bonanza35!damage, 3,3,3,3
gauge04=accusim_xml!code_s, 4,4,4,4
gauge05=A2A_Accusim!lua, 5,5,5,5
gauge06=A2A_Accusim!AVS, 6,6,6,6
gauge07=A2A_Accusim!events, 7,7,7,7
gauge08=A2A_Accusim!random, 8,8,8,8
gauge09=A2A_Accusim!storage, 9,9,9,9
gauge10=A2A_Bonanza35!code_Bonanza35_2, 2,2,2,2
gauge11=A2A_Bonanza35!gps_integration, 2, 2, 2, 2
gauge12=A2A_Bonanza35!number, 512, 205, 240, 67
gauge13=BonanzaV!avionics, 0, 576, 1024,447 //AVIONICS DLL
gauge14=A2A_Bonanza35!warning_lights, 969, 0, 55,275
gauge15=A2A_Bonanza35!gps_default, 3, 3, 3, 3
PS
sorry for my bad english
Gauge change in V35
-
- Senior Master Sergeant
- Posts: 2439
- Joined: 15 Mar 2016, 08:23
Re: Gauge change in V35
Hi.
The bonanza gauges can stick or even fail and are unique to the bonanza , so i dont think they are interchangeable with other gauges.
regards alan.
The bonanza gauges can stick or even fail and are unique to the bonanza , so i dont think they are interchangeable with other gauges.
regards alan.
Re: Gauge change in V35
Ouch
Ok, thanks Alan and one more question please, i search now on this forum but not found answer yet.
On approach, i change gps to nav source but plane roll left and right continuity.
Of course frequencies is set AP is on everything is ok but plane go left and right...
Ok, thanks Alan and one more question please, i search now on this forum but not found answer yet.
On approach, i change gps to nav source but plane roll left and right continuity.
Of course frequencies is set AP is on everything is ok but plane go left and right...
Re: Gauge change in V35
Ok, back to topic, maybe i can change position of two A2A altimeters for better altitude view and how ?
Also, if there another solution (except check tick box 3D high resolution VC) for normal numbers font size on radio please tell me?
Also, if there another solution (except check tick box 3D high resolution VC) for normal numbers font size on radio please tell me?
- Nick - A2A
- A2A Captain
- Posts: 13805
- Joined: 06 Jun 2014, 13:06
- Location: UK
Re: Gauge change in V35
Hello doksas - I'm afraid it's not possible to change the position of any of the gauges in the virtual cockpit. As with nearly all commercial add-on for FSX/P3D, they're part of the 3-D model.
As regards the small text in the radios, please can you confirm if you've installed the latest update, as described here.
For the other issue you mention above, this may be caused by trying to intercept the localizer too close to the runway, and at too sharp an angle.
Thanks,
Nick
As regards the small text in the radios, please can you confirm if you've installed the latest update, as described here.
For the other issue you mention above, this may be caused by trying to intercept the localizer too close to the runway, and at too sharp an angle.
Thanks,
Nick
Re: Gauge change in V35
Hello Nick and thanks for answer.
My english is bad and this is why you not understand me, on radios( nav1, nav2, dme, alt select) is big text becouse i not use 3D high resolution virtual cockpit in FSX aircraft settings. Not use this option for better FPS on my old laptop.
So do you have another solution for normal( not big text) ?
I have installed latest update.
For my approach problem, yes, this is like when trying to intercept the localizer too close to the runway, and at too sharp an angle, but, i follow GPS direct to runway and about 18 nm from airport and on right altitude and course i switch GPS to NAV and then plane begin roll left and right. If i immediately press approach on autopilot plane stabilized after few seconds and everything is ok . But this way not real solution...
My english is bad and this is why you not understand me, on radios( nav1, nav2, dme, alt select) is big text becouse i not use 3D high resolution virtual cockpit in FSX aircraft settings. Not use this option for better FPS on my old laptop.
So do you have another solution for normal( not big text) ?
I have installed latest update.
For my approach problem, yes, this is like when trying to intercept the localizer too close to the runway, and at too sharp an angle, but, i follow GPS direct to runway and about 18 nm from airport and on right altitude and course i switch GPS to NAV and then plane begin roll left and right. If i immediately press approach on autopilot plane stabilized after few seconds and everything is ok . But this way not real solution...
- Nick - A2A
- A2A Captain
- Posts: 13805
- Joined: 06 Jun 2014, 13:06
- Location: UK
Re: Gauge change in V35
Hi doksas,
Thanks,
Nick
Sorry - it's necessary to keep the high-resolution 3-D cockpit setting ticked for the avionics to display correctly.doksas wrote:(...) on radios( nav1, nav2, dme, alt select) is big text becouse i not use 3D high resolution virtual cockpit in FSX aircraft settings. Not use this option for better FPS on my old laptop.
So do you have another solution for normal( not big text) ?
I suspect this behaviour is also related to the old laptop you mention doksas. If you're unable to maintain FPS in at least the mid-teens, the custom autopilot code may not perform at its optimum level.doksas wrote:(...) i follow GPS direct to runway and about 18 nm from airport and on right altitude and course i switch GPS to NAV and then plane begin roll left and right.
Thanks,
Nick
Who is online
Users browsing this forum: No registered users and 24 guests