Bo doing ground loops some time

[FSC190]

Hi,
now and then the Bo shows a strange behavior in P3Dv4 when accelerating speed for take off.
The tail comes up nose goes down and she loops forward and crashes.
I found the same behavior times ago with the C182 having problems with simconnect. It could be fixed, installing the latest AccuSim-Version.

[FSC190]

Here is a little video with this behavior.

http://www.serverfsc-ev.de/DL/2018-9-23_10-54-4-842.mp4

[Nick - A2A]

Hi Roland,

Do you have FSUIPC installed by any chance?

Thanks,
Nick

[MatzeH84]

The same I reported here.. https://r.tapatalk.com/shareLink?url=ht ... are_type=t
I have FSUIPC registered. Also having the Connie, Comanche and 182, but this is new. In my case it only started after the first update.

Gesendet von meinem F8331 mit Tapatalk

[alan CXA651]

Hi.
That is very strange behavior , what sim and what operating system , and is anti virus set to ignor anything simulator related , what addons do you have running with the sim , ie weather engines exctra, and do you start the sim with default flight or saved flight.
Another question how was the aircraft loaded , and what was the weather giving you or did you have fair weather selected.
regards alan.

[Nick - A2A]

Matthias - sorry, I missed your description of the event in that other thread.

In this case, FSUIPC is almost certainly the culprit and specifically spoiler assignments via FSUIPC. Please see this thread for a bit more info on troubleshooting the issue.

Thanks,
Nick

[FSC190]

Hi Nick,

yes FSUIPC is installed, and I will have a look at this.
Maybe there is some miss-configuration in FSUIPC5.ini.

[Nick - A2A]

Thanks Roland,

Yes, in that case please have a check for any entries as mentioned in the thread I linked above. And if you've a hardware spoiler axis assigned via FSUIPC, try to make sure it's disabled (via an aircraft-specific profile) or at least kept in the closed position when flying the Bonanza.

Regards,
Nick

[FSC190]

Hi Nick,
indeed there where no Axes attached to the spoiler, but in the calibration spoiler axes was processed.
I set up a fresh profile with no spoiler things and the problem seems to be fixed.
Thank you very much for the help.
Since I am very familiar with all about FSUIPC that was new to me.

[Nick - A2A]

Okay, thanks for the update Roland - you're very welcome.

Nick