Updated the T-6 in P3DV3
-
- Staff Sergeant
- Posts: 266
- Joined: 21 Jun 2012, 19:00
- Location: Tampa, FL
Updated the T-6 in P3DV3
I ran the updated for P3DV3 and all seemed to run pretty well. Said that it could not find an eh101 gauge that I have no idea what that would be for, but the issues I am having are this, 1: When I click the switches for the lights the sound plays over and over and over again till I flick it of and the back on a few times. 2: The engine sounds seemed to be tied to the speed of the airplane not the throttle. For example, when I keep the engine at 800rpm and use brakes to taxi, it sounds like the engine is slowing down, and when I let the brakes off, the engine sounds like it accelerates to the throttle position. I have not done a reinstall of the plane but this might be my next step. I always hate doing that but, if I have to I have to. Any ideas?
Paul
Part 65 certified Airframe and Powerplant Mechanic
Part 107 certified Remote Pilot in Command
Part 147 Instructor
Part 65 certified Airframe and Powerplant Mechanic
Part 107 certified Remote Pilot in Command
Part 147 Instructor
- Lewis - A2A
- A2A Lieutenant Colonel
- Posts: 33321
- Joined: 06 Nov 2004, 23:22
- Location: Norfolk UK
- Contact:
Re: Updated the T-6 in P3DV3
Hello,
are you running the P3Dv4 version of the T-6 simulation?
thanks,
Lewis
are you running the P3Dv4 version of the T-6 simulation?
thanks,
Lewis
A2A Facebook for news live to your social media newsfeed
A2A Youtube because a video can say a thousand screenshots,..
A2A Simulations Twitter for news live to your social media newsfeed
A2A Simulations Community Discord for voice/text chat
A2A Youtube because a video can say a thousand screenshots,..
A2A Simulations Twitter for news live to your social media newsfeed
A2A Simulations Community Discord for voice/text chat
-
- Staff Sergeant
- Posts: 266
- Joined: 21 Jun 2012, 19:00
- Location: Tampa, FL
Re: Updated the T-6 in P3DV3
No, I had installed the Texan into P3Dv3 before v4 even came out. All I did is run the updater to make sure it was current before I flew it. I will admit that it's been about a year since I last flew P3Dv3. I updated to the newest v3 that came out before v4, can't think of the version number off the top of my head though but, I do not recall the T-6 acting this way the last time I flew it. I only notice the engine sound issue outside the airplane but the switch sound happens every time I flip that light switch, it doesn't happen with any other switch in the cockpit.
Paul
Part 65 certified Airframe and Powerplant Mechanic
Part 107 certified Remote Pilot in Command
Part 147 Instructor
Part 65 certified Airframe and Powerplant Mechanic
Part 107 certified Remote Pilot in Command
Part 147 Instructor
Re: Updated the T-6 in P3DV3
If you own the P3D version of the T-6, there is a v4 version of the installer that was added to the package. You can obtain it by re-downloading the P3D T-6 from your store account.
Flight Simmer since 1983. PP ASEL IR Tailwheel
N28021 1979 Super Viking 17-30A
N28021 1979 Super Viking 17-30A
-
- Staff Sergeant
- Posts: 266
- Joined: 21 Jun 2012, 19:00
- Location: Tampa, FL
Re: Updated the T-6 in P3DV3
I am not flying v4 of P3D I am flying v3.x of P3D.
Paul
Part 65 certified Airframe and Powerplant Mechanic
Part 107 certified Remote Pilot in Command
Part 147 Instructor
Part 65 certified Airframe and Powerplant Mechanic
Part 107 certified Remote Pilot in Command
Part 147 Instructor
- Lewis - A2A
- A2A Lieutenant Colonel
- Posts: 33321
- Joined: 06 Nov 2004, 23:22
- Location: Norfolk UK
- Contact:
Re: Updated the T-6 in P3DV3
Hello,
are you trying to install the FSX T-6 into P3D?
thanks
Lewis
are you trying to install the FSX T-6 into P3D?
thanks
Lewis
A2A Facebook for news live to your social media newsfeed
A2A Youtube because a video can say a thousand screenshots,..
A2A Simulations Twitter for news live to your social media newsfeed
A2A Simulations Community Discord for voice/text chat
A2A Youtube because a video can say a thousand screenshots,..
A2A Simulations Twitter for news live to your social media newsfeed
A2A Simulations Community Discord for voice/text chat
-
- Staff Sergeant
- Posts: 266
- Joined: 21 Jun 2012, 19:00
- Location: Tampa, FL
Re: Updated the T-6 in P3DV3
Negative, the T-6 and the Comanche were two planes that I bought specifically for P3D, and it was well before P3Dv4 came out. No, this is something that happened after the update. So I am starting to to think that only a reinstall will fix the issue.
Paul
Part 65 certified Airframe and Powerplant Mechanic
Part 107 certified Remote Pilot in Command
Part 147 Instructor
Part 65 certified Airframe and Powerplant Mechanic
Part 107 certified Remote Pilot in Command
Part 147 Instructor
- Lewis - A2A
- A2A Lieutenant Colonel
- Posts: 33321
- Joined: 06 Nov 2004, 23:22
- Location: Norfolk UK
- Contact:
Re: Updated the T-6 in P3DV3
A reinstall might be a good idea, remember to delete the update folder too for the aircraft, if you need help with this let me know.
thanks,
Lewis
thanks,
Lewis
A2A Facebook for news live to your social media newsfeed
A2A Youtube because a video can say a thousand screenshots,..
A2A Simulations Twitter for news live to your social media newsfeed
A2A Simulations Community Discord for voice/text chat
A2A Youtube because a video can say a thousand screenshots,..
A2A Simulations Twitter for news live to your social media newsfeed
A2A Simulations Community Discord for voice/text chat
Who is online
Users browsing this forum: No registered users and 36 guests