Hi! Since i install a GTN750 in my Comanche, i notice that my NAV1 is not work. NAV2 is ok. I tried to "switch" to default RadioNav (Shift3), but dafult NAV1 also dont work. Any ideas?
My screen:
Default NAV1 inop
-
- Airman
- Posts: 36
- Joined: 02 Dec 2016, 09:24
- Location: Moscow
Default NAV1 inop
I9 9900k, ASUS Extreme XI, DDR4 32 GB, RTX2080. Pepar3d v4.5
Airbus 320Family Captain
Airbus 320Family Captain
- Nick - A2A
- A2A Captain
- Posts: 13805
- Joined: 06 Jun 2014, 13:06
- Location: UK
Re: Default NAV1 inop
If NAV1 is completely inoperable (i.e. if you can't swap active and standby freq's as well as the HSI CDI flag showing as pictured) I'd recommend you check the inbuilt P3D failures menu (Vehicle → Failures). I believe the individual radios are switched off partly via 'failing' them, so perhaps this state has somehow been 'remembered'.
Thanks,
Nick
Thanks,
Nick
-
- Airman
- Posts: 36
- Joined: 02 Dec 2016, 09:24
- Location: Moscow
Re: Default NAV1 inop
Yes, i know about this, i checked all failures, but my NAV stack is working perfectly, i can swap and tune any freq's like in NAV2. But if with NAV2 VOR2 indicator work properly, HSI indicator has "red flags" with NAV1 tuned (VOR or ILS)Nick M wrote:If NAV1 is completely inoperable (i.e. if you can't swap active and standby freq's as well as the HSI CDI flag showing as pictured) I'd recommend you check the inbuilt P3D failures menu (Vehicle → Failures). I believe the individual radios are switched off partly via 'failing' them, so perhaps this state has somehow been 'remembered'.
Thanks,
Nick
I9 9900k, ASUS Extreme XI, DDR4 32 GB, RTX2080. Pepar3d v4.5
Airbus 320Family Captain
Airbus 320Family Captain
- Nick - A2A
- A2A Captain
- Posts: 13805
- Joined: 06 Jun 2014, 13:06
- Location: UK
Re: Default NAV1 inop
If the NAV1 radio link to the HSI is broken, maybe try temporarily removing the relevant *.ini file for the GPS in question from the main "A2A_Piper_PA24_250_Comanche" folder. Is it the Flight1 or RealityXP GTN you're using by the way?
Nick
Nick
-
- Airman
- Posts: 36
- Joined: 02 Dec 2016, 09:24
- Location: Moscow
Re: Default NAV1 inop
Im using Flight1 GTN. Prepar3d v.4.1.Nick M wrote:If the NAV1 radio link to the HSI is broken, maybe try temporarily removing the relevant *.ini file for the GPS in question from the main "A2A_Piper_PA24_250_Comanche" folder. Is it the Flight1 or RealityXP GTN you're using by the way?
Nick
Thanks Nick, i will try
I9 9900k, ASUS Extreme XI, DDR4 32 GB, RTX2080. Pepar3d v4.5
Airbus 320Family Captain
Airbus 320Family Captain
- Nick - A2A
- A2A Captain
- Posts: 13805
- Joined: 06 Jun 2014, 13:06
- Location: UK
Re: Default NAV1 inop
Okay, in case that doesn't help, one other suggestion would be to remove the "Comanche250Log.dat.f" file in "My Documents\A2A\FSX\Comanche250".
I don't own any of the Flight1 units, so can't help with any specific setting there I'm afraid.
Cheers,
Nick
I don't own any of the Flight1 units, so can't help with any specific setting there I'm afraid.
Cheers,
Nick
-
- Airman
- Posts: 36
- Joined: 02 Dec 2016, 09:24
- Location: Moscow
Re: Default NAV1 inop
I9 9900k, ASUS Extreme XI, DDR4 32 GB, RTX2080. Pepar3d v4.5
Airbus 320Family Captain
Airbus 320Family Captain
- Nick - A2A
- A2A Captain
- Posts: 13805
- Joined: 06 Jun 2014, 13:06
- Location: UK
Re: Default NAV1 inop
Does that go for removing the *log.dat.f file too? (This is the one that stores persistent NAC/COMM radio frequencies.)CrewMember wrote:Unfortunately , it doesnt helps.
If no joy, maybe check to see if the radios themselves are working (i.e. see if you can listen to the morse ident or tune the DME)...
Thanks,
Nick
-
- Airman
- Posts: 36
- Joined: 02 Dec 2016, 09:24
- Location: Moscow
Re: Default NAV1 inop
Yep, i hear morse and see distance to VOR, but HSI still with red flags. Tomorrow i'll try to make a full reinstall.Nick M wrote:Does that go for removing the *log.dat.f file too? (This is the one that stores persistent NAC/COMM radio frequencies.)CrewMember wrote:Unfortunately , it doesnt helps.
If no joy, maybe check to see if the radios themselves are working (i.e. see if you can listen to the morse ident or tune the DME)...
Thanks,
Nick
I9 9900k, ASUS Extreme XI, DDR4 32 GB, RTX2080. Pepar3d v4.5
Airbus 320Family Captain
Airbus 320Family Captain
- Nick - A2A
- A2A Captain
- Posts: 13805
- Joined: 06 Jun 2014, 13:06
- Location: UK
Re: Default NAV1 inop
Before you try reinstalling, I recommend you delete the entire contents of that "My Documents\A2A\FSX\Comanche250" folder just in case there's some other persistent setting which is causing the issue. (This folder won't be removed by a reinstall either.)
Nick
Nick
-
- Airman
- Posts: 36
- Joined: 02 Dec 2016, 09:24
- Location: Moscow
Re: Default NAV1 inop
Ok, will do this. Anyway thanks for help!Nick M wrote:Before you try reinstalling, I recommend you delete the entire contents of that "My Documents\A2A\FSX\Comanche250" folder just in case there's some other persistent setting which is causing the issue. (This folder won't be removed by a reinstall either.)
Nick
Alexey
I9 9900k, ASUS Extreme XI, DDR4 32 GB, RTX2080. Pepar3d v4.5
Airbus 320Family Captain
Airbus 320Family Captain
- Lewis - A2A
- A2A Lieutenant Colonel
- Posts: 33320
- Joined: 06 Nov 2004, 23:22
- Location: Norfolk UK
- Contact:
Re: Default NAV1 inop
Hello,
I believe this is a known bug with the GPS, have you checked the Flight1 forums and updated your GPS to the latest version?
thanks,
Lewis
I believe this is a known bug with the GPS, have you checked the Flight1 forums and updated your GPS to the latest version?
thanks,
Lewis
A2A Facebook for news live to your social media newsfeed
A2A Youtube because a video can say a thousand screenshots,..
A2A Simulations Twitter for news live to your social media newsfeed
A2A Simulations Community Discord for voice/text chat
A2A Youtube because a video can say a thousand screenshots,..
A2A Simulations Twitter for news live to your social media newsfeed
A2A Simulations Community Discord for voice/text chat
-
- Airman
- Posts: 36
- Joined: 02 Dec 2016, 09:24
- Location: Moscow
Re: Default NAV1 inop
Hi, Lewis. May be, but i have latest version 2.04 and HSI inop even with all default GPS and without any GPS at allLewis - A2A wrote:Hello,
I believe this is a known bug with the GPS, have you checked the Flight1 forums and updated your GPS to the latest version?
thanks,
Lewis
I9 9900k, ASUS Extreme XI, DDR4 32 GB, RTX2080. Pepar3d v4.5
Airbus 320Family Captain
Airbus 320Family Captain
-
- Airman
- Posts: 36
- Joined: 02 Dec 2016, 09:24
- Location: Moscow
Re: Default NAV1 inop
Guys, i discover that HSI is working ONLY when engine is running. Another words, HSI is working only with vacuum pump running? Is it bug or not? I thought that HSI is electrical gauge and its powered by electricity like VOR2 gauge. Am i wrong?
I9 9900k, ASUS Extreme XI, DDR4 32 GB, RTX2080. Pepar3d v4.5
Airbus 320Family Captain
Airbus 320Family Captain
Re: Default NAV1 inop
What HSI is modeled, a quick check of the specs should confirm if it is vacuum or electric.
Flight Simmer since 1983. PP ASEL IR Tailwheel
N28021 1979 Super Viking 17-30A
N28021 1979 Super Viking 17-30A
Who is online
Users browsing this forum: No registered users and 19 guests